I bought this kit also for my z900 based on a “how to” video being available that’s easy to follow. It was super easy to install and looks really nice!!!
i wonder if it's possible to turn the L bracket 180 degrees so the turn signals sit closer in and that way the bracket doesn't stick out behind the license plate
Got the BL6's and standard fender elim for my z400, (and flasher relay obviously), absolutely love em. Simple installs by just following Bart in these these vids. 👌
i got the Ninja 300 and i wont to change the rear turn signals. The questions is ... i got the stock front turn signals and they are not leds if i change the flasher relay will it work as usual or do i have to change the front signals as well?
Are you asking about the entire little harness assembly that enables plug and play connection of signals? That is something we manufacture and sell , link is in the description of this video. If you just want the actual connector and terminals then you can get those at corsa-technic.com
Are you guys planning on making a video for the license plate light? My 400 will be coming in Thursday and I already have the light and fender eliminator..Want to make sure I hook the light up properly.
We already have a video for the installation of the license plate light and that can be found at the link below. We show a couple of different installation methods so be sure to watch the entire video and select which one suits you best! th-cam.com/video/cSM7Q_kMmeY/w-d-xo.html
Does it matter on the aro led version which side they are mounted like in this video one side is for the left and the other right I'm installing tomorrow and don't want to mess up
Our PSA-1002 Signal Mount Adapter kit would enable you to mount pod signals onto the fender there. You can see it here: tstindustries.com/tst-pod-turn-signal-adapter-plate-kit.html . There is a dropdown menu in the product page where you have to make the selection of kit type. OPen the menu and select Kit 3 which will change the sku to PSA-1002
can you have the integrated tail light bling with the pods too? I have the integrated tail light signal and the fender eliminator and wanted to ad the BL6 to my ninja 300. I'm assuming it will all blink together. is that the tail light that is supposed to blink? if you want to shut the blink on the tail light off do you just detach it?
If you unhook the integrated taillight it will stop blinking. If you want the signals and taillight to blink in unison then you will need a Y-splitter setup. This can be found here: tstindustries.com/TST-Kawasaki-Y-Style-Signal-Harness-Splitter.html .
If you placed the order today you can probably still catch the order before it goes out. Message our customer support guys through our site and let them know that you want to add those parts. This way it will not cost you any more shipping. If the order already went out then they will not be able to do much.
I placed a second order for it and just added a not to say if the other order hadn't left to put them together. I had already gotten the email that the first order had shipped. doesn't matter, they will both get here eventually
damn just placed an order and didnt get this. the relay doesnt fall under my free shipping and would arrive later. going to call and see about adding it in
If you do it early enough our guys will do it without any problem. It only becomes problematic if you wait long and the order gets fulfilled and picked up
I ordered the sequential and the lights have three wires instead of two, they are blue, red, and brown. How do I know which is pos and neg, and which to leave out I guess since the port only has two slots?
I installed them and the red wire was the only one without anything to connect them to, but the lights aren't sequential for some reason, am I missing something? I have the led flasher relay
@@Vic_Vic_Vic_Vic this sounds like you purchased our Quadrix signals So our color scheme for three wire lights is: blue=running light positive Brown=signal light positive Red=ground I suppose if you are wiring into a circuit that has only two conductors you would leave out the blue.
Love them! I got a Ninja 400 recently and it already has some mods but I'd love to add LED turn signals. I think I will be ordering the BL6 pack. One question - do you have any LED bulbs for the front signals? I can't see any on your website, can any bulbs with the correct fitting be used? Thanks!
You've got to hang tight for the front buddy. Give us a couple of weeks. We aren't providing any LED bulbs for the front because we have something way better coming down the pipe.
@@thecommentator6694 if you are patient it will pay off. Our projects take some time because we are a high end design firm. We dont just bang out parts overnight. I think our limited catalog of exclusive designs that have attracted a lot of attention demonstrates that. Since these signals you are asking about fit a bunch of models and years we are taking extra time to perfect the parameters. Then we have to cut the molds, and produce circuitry and harnessing. It will still be a good while before our signals are available but once they are n400 owners are going to lose their minds over them.
I am not sure. I know that they design in large signal holes to fit the oem signals. If they also put in smaller circular holes for aftermarket signals then you will be all set. You can also try the installation using our L brackets the way it is shown in our video, and that will most likely work.
You can go to our website, navigate to the product page for the tail light, and sign up for email notification about that product. We have no launch date yet but this is your best way to stay updated on the subject when we release news.
tail light is the best option but having indicators that close together is not always legal depending on where youre from. I was going to purchase it but in australia indicators need to be 30cm apart.
Just installed. I had to change a few things but got it to work. First the screw did not fit the nut from the L bracket to the plate. I just used what I had to hold the plate on before. Second the lights were opposite for me, so the label had to be facing upside down which means I switched side for the signal to line up. Idk if this is user error or a manufacturing error but it was kind of a pain to sort out. Anyone lmk if they experienced something like this.
The signal lamps do not care which way they are up. You must have connected left to right and vice versa. All you had to do to correct this is to reverse the signal connection. I would like to hear more details on why the screw did not fit into the nut for you. We sell the kits that are shown successfully installed in this video. If there was a kitting error in assembly I would like to know about it.
You just watched the video presented by the manufacturer of the parts. You can follow the link in the description or go to TSTindustries.com and navigate to the parts you are looking for.
@@TSTindustries sorry I thought this whas the video of the integrated signal turn on te brake light, I mean when will be able to buy the integrated turn signal?
I wish you took the plate off so I can see what is going on behind it. It doesn't seem complicated to figure out, but it would have been nice to have a clear view of what you are doing.
I bought this kit also for my z900 based on a “how to” video being available that’s easy to follow. It was super easy to install and looks really nice!!!
i wonder if it's possible to turn the L bracket 180 degrees so the turn signals sit closer in and that way the bracket doesn't stick out behind the license plate
Got the BL6's and standard fender elim for my z400, (and flasher relay obviously), absolutely love em. Simple installs by just following Bart in these these vids. 👌
Great! Thanks for the support.
i got the Ninja 300 and i wont to change the rear turn signals. The questions is ... i got the stock front turn signals and they are not leds if i change the flasher relay will it work as usual or do i have to change the front signals as well?
Our relay is a full fix and will work on your bike whether you have stock lights, LEDs, or a mixture of both.
TSTindustries Great, thank you.
Hey, where did you get those harness connector?
Are you asking about the entire little harness assembly that enables plug and play connection of signals? That is something we manufacture and sell , link is in the description of this video. If you just want the actual connector and terminals then you can get those at corsa-technic.com
Are you guys planning on making a video for the license plate light? My 400 will be coming in Thursday and I already have the light and fender eliminator..Want to make sure I hook the light up properly.
We already have a video for the installation of the license plate light and that can be found at the link below. We show a couple of different installation methods so be sure to watch the entire video and select which one suits you best!
th-cam.com/video/cSM7Q_kMmeY/w-d-xo.html
So how’s the ninja?
what mounting kit would i need for a yoshimura fender eliminator?
Are these compatible and fully functional for the ninja 500? The same instructions as in the video?
Yes and pretty much. We have a separate video on that model being released shortly. It will show mounting in the high and low mount configuration.
Does it matter on the aro led version which side they are mounted like in this video one side is for the left and the other right I'm installing tomorrow and don't want to mess up
The ARO-18 signals are not side specific.
@@TSTindustries thanks just installed them they look great
Just got these for my 2018 ZX6R. Should I be concerned if the grey clip controls the right light, the opposite of what was said in the video?
If you are talking about connector color then just plug the signals into the connectors that make them operate on correct side.
What mounting kit is needed to install these on the front of a Z125
You will need Adapter Kit 3 for that installation.
what mounting kit is needed for this to be installed on the stock fender on the ninja 400?
Our PSA-1002 Signal Mount Adapter kit would enable you to mount pod signals onto the fender there. You can see it here: tstindustries.com/tst-pod-turn-signal-adapter-plate-kit.html .
There is a dropdown menu in the product page where you have to make the selection of kit type. OPen the menu and select Kit 3 which will change the sku to PSA-1002
can you have the integrated tail light bling with the pods too? I have the integrated tail light signal and the fender eliminator and wanted to ad the BL6 to my ninja 300. I'm assuming it will all blink together. is that the tail light that is supposed to blink? if you want to shut the blink on the tail light off do you just detach it?
If you unhook the integrated taillight it will stop blinking. If you want the signals and taillight to blink in unison then you will need a Y-splitter setup. This can be found here: tstindustries.com/TST-Kawasaki-Y-Style-Signal-Harness-Splitter.html .
damn... would have been good to know that before I put in my order
If you placed the order today you can probably still catch the order before it goes out. Message our customer support guys through our site and let them know that you want to add those parts. This way it will not cost you any more shipping. If the order already went out then they will not be able to do much.
I placed a second order for it and just added a not to say if the other order hadn't left to put them together. I had already gotten the email that the first order had shipped. doesn't matter, they will both get here eventually
damn just placed an order and didnt get this. the relay doesnt fall under my free shipping and would arrive later. going to call and see about adding it in
If you do it early enough our guys will do it without any problem. It only becomes problematic if you wait long and the order gets fulfilled and picked up
I ordered the sequential and the lights have three wires instead of two, they are blue, red, and brown. How do I know which is pos and neg, and which to leave out I guess since the port only has two slots?
I installed them and the red wire was the only one without anything to connect them to, but the lights aren't sequential for some reason, am I missing something? I have the led flasher relay
@@Vic_Vic_Vic_Vic this sounds like you purchased our Quadrix signals So our color scheme for three wire lights is:
blue=running light positive
Brown=signal light positive
Red=ground
I suppose if you are wiring into a circuit that has only two conductors you would leave out the blue.
Love them! I got a Ninja 400 recently and it already has some mods but I'd love to add LED turn signals. I think I will be ordering the BL6 pack. One question - do you have any LED bulbs for the front signals? I can't see any on your website, can any bulbs with the correct fitting be used? Thanks!
You've got to hang tight for the front buddy. Give us a couple of weeks. We aren't providing any LED bulbs for the front because we have something way better coming down the pipe.
@@TSTindustries Great to hear, I'll be waiting! Thanks for the response :)
If you are an instagram user you should follow us because we will soon be releasing spy shots of what I am talking about.
@@TSTindustries I'm following and waiting!
@@thecommentator6694 if you are patient it will pay off. Our projects take some time because we are a high end design firm. We dont just bang out parts overnight. I think our limited catalog of exclusive designs that have attracted a lot of attention demonstrates that. Since these signals you are asking about fit a bunch of models and years we are taking extra time to perfect the parameters. Then we have to cut the molds, and produce circuitry and harnessing. It will still be a good while before our signals are available but once they are n400 owners are going to lose their minds over them.
Do wires go through the elite fender eliminator ?
Yes. There is a wiring hole provided in the closeout component. You can see that in detail in the fender eliminator video we provide for that bike.
Do you also ship to Italy?
We sure do
Are you guys making this slim indicators for ninja 300 ???
These are universal. They fit the 300 as well.
Do this signals work with an integrated taillight?
Yes. Check out Mark explain how to get that done here: th-cam.com/video/tgqbBzYpVsA/w-d-xo.html
Will this installation work on a Vagabond Fender eliminator?
I am not sure. I know that they design in large signal holes to fit the oem signals. If they also put in smaller circular holes for aftermarket signals then you will be all set. You can also try the installation using our L brackets the way it is shown in our video, and that will most likely work.
Can we use this with the yoshi fender eliminator?
That shouldn't be an issue at all. You can also use it with ours as well. 😉
@@TSTindustries link to u guys plate eliminator?
@@Kingnabor All products can be found on our website by navigating to your bike model.
tstindustries.com/kawasaki-ninja-400-2018-/
Link to the harness converter, need this asap .
When you go to our website and input the bike year make model info, you will be presented with all the compatible parts including harness converters.
Are those the smoked lights or regular ones?
th-cam.com/video/H_ytEHjj2Ek/w-d-xo.htmlm28s
Will this fit a 2015 636 kawasaki
What is the product code for this harness converter?
The ones in this video are CVK01
Need that tail light🔥
Welcome to the dark side
when gonna available the tail light for ninja 400?tnx tst
You can go to our website, navigate to the product page for the tail light, and sign up for email notification about that product. We have no launch date yet but this is your best way to stay updated on the subject when we release news.
tail light is the best option but having indicators that close together is not always legal depending on where youre from. I was going to purchase it but in australia indicators need to be 30cm apart.
Just installed. I had to change a few things but got it to work. First the screw did not fit the nut from the L bracket to the plate. I just used what I had to hold the plate on before. Second the lights were opposite for me, so the label had to be facing upside down which means I switched side for the signal to line up. Idk if this is user error or a manufacturing error but it was kind of a pain to sort out. Anyone lmk if they experienced something like this.
The signal lamps do not care which way they are up. You must have connected left to right and vice versa. All you had to do to correct this is to reverse the signal connection. I would like to hear more details on why the screw did not fit into the nut for you. We sell the kits that are shown successfully installed in this video. If there was a kitting error in assembly I would like to know about it.
Will this work with 2012 Kawasaki zx6r as well?
The signals will for sure. The fender eliminator is different for that bike and can be seen here: tstindustries.com/Kawasaki-Ninja-636-ZX6R-2009-2012/
hello tst, can show how to uninstall meter ninja 2018
Is this DOT certified?
No
where can I buy it
You just watched the video presented by the manufacturer of the parts. You can follow the link in the description or go to TSTindustries.com and navigate to the parts you are looking for.
@@TSTindustries sorry I thought this whas the video of the integrated signal turn on te brake light, I mean when will be able to buy the integrated turn signal?
@@Golderos97 Really soon my friend. We just shot the installation video yesterday.
I wish you took the plate off so I can see what is going on behind it. It doesn't seem complicated to figure out, but it would have been nice to have a clear view of what you are doing.
i think to get the awesome Ninja 400,
for a "low budget" track bike build series!💚
if you have good ideas for mods let me know💚
We do have ideas. Big ideas. They are secret for now but if you follow our superbike R3 build series you will know what we are thinking.
Will these fit the Z125 Pro?