Thanks! Yes it does, as soon as you have the laminated board in the bag the fumes stay inside as well. Bit before that point it’s just a regular lamination process with lots of fumes.
Could you explain your search for the pump for the first-timer, please; am unsure of which unit to lean towards, or how much to budget for 🤣 Thank you for your informative series, and board building videos!
Hi Family Jay, Ik looked for a vacuumpump on second hand websites. And I found this one with everything attached. Very lucky! Thats the most budget friendly option.
I think the chewing gum stuff MAY be/similar to "Blu tack" that we have in Australia (and other places?) Any information on the coupling from bag to hose? The 2 or 3 piece metal and rubber ring piece you demonstrated after making a small hole in the bag? Thanks once again 😊
Hi, thanks for your comment. I got it from this Dutch website. polyestershoppen.nl/vacuummaterialen/vacuumconnector-1251.html Maybe this helps you find the part in Australia. Good luck!
the stuff you are use to reuse the bag woudl be interresting to me! do you have some infos about it or can share the source to purchase it? Greetings from a first shaper/builder ;) BTW great vids!!
Thanks 🙏! Some people in the comments called this stuff blue tack! I got it from a friend who used it for many years but never got the name of the stuff. Sorry!
It’s very hard tot tell from the meter in my system. I’s located in the wrong place. So every time the pump shuts off, the meter will go back to atmospheric. But it’s somewhere around -0,2 bar I think.
Hello my friend, thank you very much for the information in the video. I want to make a surfboard with the vacuum technique. The only thing that I could not understand well was the name of the two fabrics (Cloth) that you put on the carbon fiber. can you give me the name of both and if you can tell me where to buy them? thank you very much aloha 🤙🏽
Hi! The first layer is called peel ply cloth. The second one is absorber cloth or bleeder cloth. I buy them online at a composite webshop in the Netherlands called polyestershoppen.nl
Sorry for my very late answer. I don't know anything about the pump, I bought it second hand. The text on the sticker on the pump is unreadable because of it's age. I just know it works... I have no idea if it's two or one stage. Sorry! How's your process going so far?
I like to put a release film (bread wrap) between the breather fabric and the peel ply, it makes it much easier to separate the breather from the peel ply. Also those who are new to this technique, do a lot of experiments before doing your first full size board. There are quite a few things that can go wrong. After 30 years of vacuum bagging I have made most of the mistakes available!
Very helpful. Been looking to invest in a vacuum set up. Board at the end looks bad ass!
Could you do a video showing the results? Like some close ups ! This video helped a lot :)
The results of what? Glad this video helped you!
@@Dzjiefoils a carbon board! I'd love to see a close up after removing the bag. Any final touches?
Check this video out. How to build a kitefoil board | part 1
th-cam.com/video/0DvA7FXQCc4/w-d-xo.html
@@Dzjiefoils I will! And I also found a mini series which you make a carbon surfboard. 4 parts or 3. I have to watch that
yes, in almost all my boards I use carbon, so you can watch them all. Haha
Excellent information. Thanks man!
Youre welcome! Hope you can use it for making something cool
very informative video! does it smell less epoxy(maybe less toxic) if you vacuum bag? cheers
Thanks! Yes it does, as soon as you have the laminated board in the bag the fumes stay inside as well. Bit before that point it’s just a regular lamination process with lots of fumes.
@@Dzjiefoils awesome, i heard the eco based does not smell as bed, MAYBE less VOC
@@6to6surf4 just always wear a respirator, no matter how little it smells. I’ts all toxic.
@@Dzjiefoils as your girlfriend I'm happy to read this :)
Could you explain your search for the pump for the first-timer, please; am unsure of which unit to lean towards, or how much to budget for 🤣
Thank you for your informative series, and board building videos!
Hi Family Jay, Ik looked for a vacuumpump on second hand websites. And I found this one with everything attached. Very lucky! Thats the most budget friendly option.
can you reuse breather and peel ply?
No, you have to throw it away. 🤷♂️😢
Because it’s saturated with hardened epoxy
@@Dzjiefoils got it thanks!
I think the chewing gum stuff MAY be/similar to
"Blu tack"
that we have in Australia (and other places?)
Any information on the coupling from bag to hose? The 2 or 3 piece metal and rubber ring piece you demonstrated after making a small hole in the bag?
Thanks once again 😊
Hi, thanks for your comment. I got it from this Dutch website. polyestershoppen.nl/vacuummaterialen/vacuumconnector-1251.html
Maybe this helps you find the part in Australia. Good luck!
the stuff you are use to reuse the bag woudl be interresting to me! do you have some infos about it or can share the source to purchase it? Greetings from a first shaper/builder ;) BTW great vids!!
Thanks 🙏! Some people in the comments called this stuff blue tack! I got it from a friend who used it for many years but never got the name of the stuff. Sorry!
@@Dzjiefoils np, keep up with your vids👍
Great work! How many inHg or -Bar are you pulling your vacuum?
It’s very hard tot tell from the meter in my system. I’s located in the wrong place. So every time the pump shuts off, the meter will go back to atmospheric. But it’s somewhere around -0,2 bar I think.
@@Dzjiefoils thanks, I understand. That's the same I'm aiming for, thank you 🤙
Hello my friend, thank you very much for the information in the video. I want to make a surfboard with the vacuum technique. The only thing that I could not understand well was the name of the two fabrics (Cloth) that you put on the carbon fiber. can you give me the name of both and if you can tell me where to buy them? thank you very much aloha 🤙🏽
Hi! The first layer is called peel ply cloth. The second one is absorber cloth or bleeder cloth. I buy them online at a composite webshop in the Netherlands called polyestershoppen.nl
Nice that you want to try the vacuum process! It can be very fun!
Thanks a lot my friend 🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽
My friend the pump vacuum pump model please.
Is two or one stage??
Sorry for my very late answer.
I don't know anything about the pump, I bought it second hand. The text on the sticker on the pump is unreadable because of it's age. I just know it works... I have no idea if it's two or one stage. Sorry! How's your process going so far?
I like to put a release film (bread wrap) between the breather fabric and the peel ply, it makes it much easier to separate the breather from the peel ply.
Also those who are new to this technique, do a lot of experiments before doing your first full size board. There are quite a few things that can go wrong. After 30 years of vacuum bagging I have made most of the mistakes available!
But will the breather/absorber cloth still absorb some excess resin?
@@Dzjiefoils yes if you use perforated release film. It allows excess resin to bleed through to the breather cloth.
Interesting!
Thanks!
blue tak
Thanks!
Noice