Wera Jokers are not an April fools Joke. I'm not joking here. All joking aside, this is huge and not
ฝัง
- เผยแพร่เมื่อ 30 มี.ค. 2022
- The Wera Joker 6004 adjustable wrenches are a unique design that functions well across many jobs. Here is the largest Joker, the XXL, and the smallest Joker, the XS.
On Amazon:
Largest Joker: amzn.to/3Nz1Zsh
Smallest Joker:
amzn.to/3uJBZSm
I'm not sure I see a application that I need the joker wrench but I have a caming adjusting wrench also the swing on the joker seems like it takes a lot of space I'm intrigued but not sold I was certainly hoping to get some excitement but as always you have great words of inspiration doc I mite try one but I am still skeptical of a real use.
That is because you are a mechanic (which is also my primary use for tools). Wera is know in europe as basically the plumbers tools (and similar household and commercial type trades). There are many connections in plumbing where a ratcheting feature on a wrench would be handy because you can’t use of a socket or ring spanner. For example, a fitting on a pipe. If you have ever sat there and spun one in with an open end (or even more annoying an adjustable wrench), you know it takes forever. The other advantage is that you get multiple sizes in one wrench. Unlike being a mechanic where you have a giant box of tools (or multiple boxes) if you are a plumber, you have to carry all your tools.
@@ptstouring49 I always took them for huge in the bicycle community isn't that what the wera rebels are?
@@CPthetooladdict Hey CP. Thanks for stopping by. I heard that too that Wera's tool targets were Bikes, motorcycles, and small engines. Most. modern quality bicycles are Hex and Torx heavy. Not a lot of wrenches used much anymore. However, once the Joker concept is comfortable in your workflow, it is a very handy and effective design. Fighting with an adjustable wrench around a blind corner is always a challenge.
But CP, one of the other reasons I did this video is because my earlier video about the Joker has got over 150k views. I figure maybe it got caught up in a Batman search result or some other error. So now I'll follow this video's analytics to see where it goes. Here's that previous video: th-cam.com/video/7zDRz-sIN50/w-d-xo.html
They do have a lot of bicycle sets (and released a lot of new ones) so they are in that market for sure, but the market for residential and commercial service and repair is much bigger. I think most people who buy Wera are “tradies” as they would be called in the UK. Would be interested to hear others impression, especially those in Europe in those lines of work.
@@lastbesttool holy cow man I had no idea thats freaking awesome congratulations on that video that's fantastic!!!
The best feature of the Jokers are that 5-6 of them replace about 30 sizes of metric and SAE wrenches. This is exceptional for mobile or minimalist tool kits.
Appreciate another fun look at a unique tool LBT👍 Going to have to agree with many of the other commenters though and say the Knipex Pliers Wrench is the way to go over these. I suppose I could see the possible advantage of a Joker in the case where your a professional that has one certian size nut/bolt that you deal with repeatedly and you have one Joker that fits it perfectly. Although again the Pliers Wrench would handle that situation quite well as well. I build kit gazebos and pergolas in my line of work all the time and the Pliers Wrench is my go to tool for holding all sizes of lock nuts on the back side when tightening bolts with my impact driver.
Ever since the retirement of German Tool Reviews I've been looking for this kind of content. Thanks!
Good video as always Doc. I am surprised for the pergola you are not planning on using a 1/2in impact with a wrench or ratchet at the other end, especially because you will presumably have the same size bolts and nuts throughout. As I noted to CP below, I always saw the jokers as suitable for plumbing tasks and not a whole lot else. I just can’t like them (nor the raptors), on the other hand, I do love the Knipex pliers wrenches and the channellock 8in code blue wide-azz are my favorite adjustable wrenches (because of the handles - all the Spanish Igera made adjustable a are pretty much the same brand to brand).
Hello again Doc
Thank you for another Great Video. I am not sure about the Wera Joker Wrenches. I personally have not seen them used on the job, yet. Again thank you
The 2nd from left knipex pliers I forget what they call them but hands down the best adjustable pliers made and are my #1 go to,sorry adjustable crescent but you've been replaced & deemed obsolete
The Knipex Pliers Wrench on the bench there function similarly and have a wider range of jaw opening sizes. The Jokers are interesting but seem at least a bit redundant if you have the Knipex. Thoughts?
I agree there is quite a bit of overlap between the tools. I'd like to compare them all someday, but for now, I see some advantages from the Joker with a single beefy handle and no onboard adjustments. Of course the Knipex Plier Wrench also has its long list of advantages.
I Love my knipex raptor pliers!
Knipex isn’t idiot proof though
I have both. The wera are far more convenient and way faster to use. I'd say they're a luxury more than a necessity. The knipex are closer to an adjustable wrench than they are the joker wrenches but they're still awesome
Knipex has handles and need squeezed. That's the main difference. These, for me, I use them for nuts where I would have to use an open end wrench stroke by stroke. I also use them in many ways were the knipex would be used, but I can just use this and quickly ratchet.
But you got the main problem. Weight and sizes. These are heavy. I only carry the s and m in my bag. Adding more is too weight. I carry one knipex and it does 50x more sizes.
I still have a whole bunch of those Craftsman weird bolt tools. Some of them work others don't. I think I have about four of them. Definitely looking into getting the Wera joker as well. Can never have enough or the right tool.
I have just bought the whole set. Thanks for bringing this wonderful spanner to light.
Please can you give an update on good they are
I have several , I haven’t made up my mind about them . I’ve used the smaller ones a time or two , mostly when my 125 mm Knipex Plierwrench was a tad bit too large in the head department .
I had to replace a hose going from under sink filter to a water filter tap. The space was extremely limited I could barely got in an adjustable wrench and to tighten the nut would've taken a lot of time. So I used this wera 6004 either S or XS and I tightened it with ease. You just to get the hang of it and it goes very smoothly.
They Need al lot of swing room. And you need to carry multiple wrenches for the tasks. I would go with a Bahco adjustable wrench. They are the inventors of the adjustable wrench and the best.
What do you think of the plastic that holds the spring? I’m wary of that coming off and making the wrench a paper weight. Maybe it can be placed back in but there are one too many reviews complaining about it.
The Rothenberger Rotorque torque wrench is adjustable from *10mm to 110mm*
I have the 4 piece kit and hadn't actually had the chance to use them. I finally had the chance on a sink faucet nut from underneath. Nope! The large was too small for the nut so I used the trusty basin wrench. I have been thinking about getting the XL and XXL so I have full set.
On a side note this might get some discussion. I came up in the automotive world. When I was trained we always used the exact size socket and or wrench. I am still horrified when I see all tradesman using adjustable wrenches for everything. I also realize they get their work done with no issues so this is my problem. :)
Lenox sells a large-jaw version of the pliers wrench. They are not quite as heavy-duty as the knipex tools, but they work FANTASTIC on plumbing tasks. They are also a good impromptu vise/clamp for odd tasks. Ive used mine several times for pressing in pins and bushings on stuff. Using just the tips can give you decent reach into recesses as well if you have enough room to get 1/6 of a rotation. Im speaking from memory here but the span on the jaws is probably 3 inches, but overall length maybe 12. Nimble for what they are.
I came up that way too, and hate using adjustables of any kind. Doesn’t take too long in the job to be able to identify the size you need by sight so it’s not like you’re fumbling for the right wrench.
@@andygilbert1877 for production maintenance, it’s much more handy to carry a few adjustable around with you, that will get the same job done without having to walk back and get the “right” tool. It’s a common misconception that there’s anything inherently wrong with using adjustables. They have their place just as much as they have their limitations.
I'm sure the Jokers are forged, but the way you can tell is by the seam (assuming the seam hasn't been ground flush). Forgings will have a broad, relatively flat seam. Castings have a narrow, taller seam.
That watch is a nice tool, I also Wear mine when working,
Looking at the UK prices, these adjustable Jokers look very expensive for the limited range covered. The small size is around £30 and only covers the 10-13mm range - you could get a similar size Bahco adjustable for £20 which would cover 0-21mm.
But bro you just don’t understand bro you NEED to pay an exorbitant amount of money on tools
All jokes aside I love Wera but I won’t be buying their wrenches or sockets. As you said, Bahco make excellent tools without breaking the bank.
I have a "general purpose" toolbag that I carry when visiting friends, parents, etc just in case something needs fixin. I'm really thinking a set of these would go well in that kind of bag. Do you have any videos on putting together a general purpose bag like that?
I do the same thing, I have a a set of Wera screwdrivers, a micro slotted and micro Philips, 3 joker wrenches, knipex Cobras (small & med), a tape measure, knipex cutix, a level and a Picard hammer with a small screw box along with some wire spades & wire nuts also I threw in the knipex stripper, it’s over kill for a “emergency bag” but I work on very expensive equipment for my job and I’m the guy who will go out of his way to get snap on for a diy project lol
Nice tool but I love bahco adjustable wrenches
Wera has moved its production to the Czech republic but the engineering is still in Germany.
If one compares the Wer Joker, the Knipex Raptor, the Knipex Wrench Pliers and traditional adjustable wrenches, then also adds the Makita locking adjustable wrenches, one finds that each & every of these tools has got its advantages and disadvantages. The Raptors are optimal for some kind of (tight) spaces, the small Jokers I like most for their range, and the pliers wrenches and Makitas invention are best for the large numbers.
Is that literally their biggest wrench, or actually ?
The XXL is great for EMT fittings when you're on a ladder. The little ones are just kind of annoying.
Look up the Hastee wrench by the Davenport tool co.
I have a couple of those craftsman clench wrenches in a foldable pocket style, they don't say made in USA. Just bought them on a whim, I've used them a few time just for shits and giggles and they seem fine for what they are. I don't really ever reach for them or my Jokers, but I suppose if I needed something to self ratchet and I couldn't use a speed wrench or ratcheting flare nut I suppose I have these other guys.
The xs joker is awesome. Used it all day on beam clamps
I'm with you on that one. The more I use the smaller Jokers, the more I get faster and more precise with their use and the more I like them. I just don't have the opportunity to use the large one yet so it has still to prove its worth.
@Last Best Tool I'm holding off on the larger sizes until you release a follow up video lol
@@imthedude5035 Fair enough.
Interesting, probably works well in certain situations I suppose.
Curious, in the spirit of minimalism, what made you decide against a set of Jokers for your overland kit?
Maybe I'm just old. Or simplicity within the tool itself is important. The fewer the moving parts the better. And no moving parts is best. What do you think?
@@lastbesttool I would tend to agree on the fewer moving parts idea, however, I know that many trades people rely on Jokers every day for their jobs. I would hope that they don't malfunction often. With all that being said, I've never used a Joker wrench, so I can't speak to any of it personally. I was just wanting to hear your reasoning! Thank you, Doc!
“The wrench community.” 😂
My grandma bought me a versa wrench on qvc like 20 years ago 😂 I still have it. Same thing
The Versa Wrench is quite similar. However, the price of the Wera is not that much, and it comes in many sizes. So while there are options, there is nothing extravagant about the Wera unlike if Snap On made one. Good but inexpensive ideas just seem to shift around between companies. Sound like QVC was just not targeting the right audience leaving the door open for others to move in. And Wera did.
@@lastbesttool
The Hastee wrench by the Davenport tool co came out in the 60's or 70's or so.
It seems well done and everything, but like a lot of this stuff the company fails to give the design what it deserves.
Being known for gimmicks doesn't help ( look up Davenport tool co, you'll have fun ) , but the biggest issue is when they push it as the solution to end all others.
They sell it to the wrong people who buy it for the wrong reasons, instead of simply offering a tool that might be a good solution for some people in some situations.
It goes to dads on fathers days or anybody who just played into the marketing and get disappointed by it's very limited usefulness.
The Craftsman clench wrench is okay, but then they made the folding version and pushed the marketing BS too hard.
@@lastbesttool it just made me laugh. I always kept that thing in the tool box as a keep sake/ conversation piece. Funny to see quality tools using design now.
Not too long ago I had my eyes on those as I do generally prefer the wera ergonomics over most others, but decided to go with the knipex pliers wrench as I have to travel for work and did not want to carry more tools than necessary. Btw in pretty sure wera does most if not all their manufacturing in the Czech Republic.
XS 7-10mm, S 10-13mm Why oh why didn't they make one that covers 8 to 12 mm. It seems like that would be possible and that range would be absolutely perfect.
Put the bolt / nut in a vice, too much moving around of the wrench to follow the small moveent to the wrench mechinism, or see clearly its shape/construction, otherwise, good info.The more you move the tools around the less I can focus on it, and you're moving it around a lot.
Not sure if I can use this, but hey the one who dies with the most tools wins lol. cool channel, I need to buy one and use it on my Channel lol.... no joke lol
Esa marca Wera Joker es lo más chingon qu he visto en herramientas de mano, super, solo que su precio es un poco elevado, pero lo vale
An important feature of the Joker that you did not touch on, the cut out in the jar provides for a short in-between stroke of the nut you torqueing on....very important feature as seen at the 6:30 point in the video but you didn't make comment about it.
Meh,I prefer my knipex pliers wrenches. 180mm and 250mm covers everything in every nut situation I come across,and less tools as you can have with you the better when working on heights.
This guys nuts about wrenches. His very passionate .
So what would you throw in a truck tool box?
I’ll have to think about that. If space and weight are nonissues (compared to my overlanding series) then there is a whole tool world out there to discover.
@@lastbesttool small underseat toolbox for a reliable toyota
Those smaller Jokers look like they would be great for tight quarters plumbing jobs. I would love to give the a try but they are $40 a piece. O Riely's auto parts carry the the Power Torque version I wonder how they compare.
They don’t come close. They are much more fragile. I have the set of them and the set of jokers with the larger ones as well as a pliers wrench. I use my small pliers wrench the most. I have the small 2 piece set I wear on my belt. When I have emergencies such as fuel leaks , loose couplers etc. for diesel generators or other connections. I can look at the fitting and I know which wrench it will be. It does metric and sae. Even though I have a full set of tools in my van. These wrenches are with me at all times. Instead of going back up flights of stairs and dragging my tools back and forth. These are faster and saves time. But they have a time and place. They are faster than the plier wrench since you don’t need to adjust them especially when you don’t have the room to stick your hand in with it. They don’t seem very handy until you use them. My powertorque wrenches I keep with me also but mostly to lend out or as a backup.
They could have been much better if one could lock them in chosen position
You need to set the Raptor correctly.
Too bulky big head. I prefer the combination wrenches with the embedded sliding mechanism set into lower jaw to automatically adjust which is more compact.
Joker wrenches are the CVTs of the wrench world
The raptors are a nice gimmick, but I wouldn't use them over a wrench or the square jaw Knipex
No gimmick. One must use them correctly.
He has nice finger nails.
Gimmick
I’ll never buy these because they’re only sold in metric.
Ok idea. 🤔
Stupidly expensive... 👎
My god…. Stop buying tools you’re CLEARLY almost never using.
Why would I do that? I have a TH-cam channel to feed. But thanks for your concern.
@@lastbesttool please….. your not helping my own out of control tool “budget”
Consume and buy stuff people look at me im buying bcos I need em for work yes every type of tool known for "work" but consume dummies
Why can't people say Knipex properly? It's just like knife.
No it isn't, it's a german brand so hence is pronounced kuh nip ex.
Wera and wiha are the same, and should be pronounced with a V instead of a W, and then wago for example, should be pronounced vago as w is v in german.