Kali Linux - Disable Nouveau driver and Install NVIDIA Driver with CUDA Tool Kit Debian 12
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- This instructional guide will provide a step-by-step procedure on how to install NVIDIA Driver and CUDA on Kali Linux, a Debian-based operating system. By following the instructions provided, you will be able to successfully install the necessary drivers and tools required for your NVIDIA graphics card to function optimally on your system.
Since the steps are similar on Parrot OS, you can use the exact instructions that I made for Parrot OS.
➡️ Step-by-step instruction: bit.ly/46teM8b
➡️ Uninstall instruction: bit.ly/46seUEU
➡️ Should you find this tutorial helpful, we kindly request that you consider supporting our channel by subscribing to our TH-cam channel or using the affiliated links and URL shortener links provided below. Through your purchase using any of the given links, we will receive a small commission, which we will use to expand our channel and enhance our services. We appreciate your support, and we remain committed to providing you with quality content.
⚠️ FTC Disclaimersysadmin102.co....
♡ Ways to support: sysadmin102.co...
🌐 Website: sysadmin102.com/
✉️ Business Inquiry: service@sysadmin102.com
© SYSADMIN102™ LLC
For my case it boots up to a blinking cursor after disabling nouveau, the cursor stops blinking after few seconds but nothing happens after, doing crtl + alt + f1~6 does nothing, only crtl + alt + delete works, which is rebooting the computer
Are you using Kali? If so, boot into safe mode.
Same here, getting black screen after rebooting.
Not getting tty
Hvae you try boot into safe mode?
@@sysadmin102 I have the same issue as him and safe boot mode didn't work either. I am stuck using terminal mode for the time being.
After i type last command 'reboot' the screen is freezing in dragons image ? What the resolve
What happened after you manually rebooted?
I've been watching many videos because always the blaklist step seemed hacky, but thankfully everyone does it the same.
One thing you didn't do was installing dependencies, something others do is letting the nvidia.run disable nouveau, after viewing more videos I prefer doing it manually since it doesn't seem like "hacking", I would also think going into other higher tty would be better, also you don't stop your display manager, gdm3, sddm or whatever you might be using.
nvidia.run sometimes doesn't actually disable nouveau. I refer to do it manually. I'm already in console mode, what the point of disabling lightdm? What dependencies?
@@sysadmin102Hi, congratulations on the vodeo, I'm trying both Kali Live and the one installed on the SSD but the mouse arrow and the black screen appear on the desktop, the PC has an Nvidia GPU, can you give me some advice, if I use the live mode by setting safe-mode it works well, I tried changing nouveau to modeset=0 but the problem remains, greetings
Works like a charm
That’s good cause seems like everybody else was having issues with it.
After i reboot i will get the kali lunix thing where i can go in afvanced options or normal boot if i do notmal boot i will jave a _ that blinks after it will ho way and my screen tays black its still on but it stays black
Meaning your Nvidia wasn’t loading or installed properly. You can follow my tutorial in the description to reverse it back to the generic driver.
Hi
when i use this command ( sudo update-initramfs -u )
the output is
W: Possible missing firmware /lib/firmware/i915/mtl_huc_gsc.bin for module i915
W: Possible missing firmware /lib/firmware/i915/mtl_guc_70.bin for module i915
i915 is the Intel Graphics Driver.
i have problem in Kali Linux when i successfully install kali Linux on my System after installed done getting free i don't know why kali Linux, parrotos, Linux mint, blackarch all getting freez after install Only Ubuntu not getting freez what is problem there ?
i have gaming laptop.
$ lspci grep -i nvidia
01:00.0 3D controller: NVIOTA Corporation GM107M [GeForce GTX 960M] (rev a2)
01:00.1 Audio device: NVIDIA Corporation GM107 High Definition Audio Controller
[GeForce 940MX] (rev a1)
Are you dual booted with windows 11?
Thank you!!!
Ctrl + alt + f1 not working it suspend the system idk why😢
It’s depending on your distribution. Try Ctrl + Alt +( F1 to F6 ) or find out what the default tty for your Linux distro
sudo update-initramfs -u while I run this I am facing this type of error...
update-initramfs: Generating /boot/initrd.img-6.8.11-amd64
W: Possible missing firmware /lib/firmware/amdgpu/ip_discovery.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/vega10_cap.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_cap.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/navi12_cap.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/psp_14_0_0_ta.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/psp_14_0_0_toc.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_6_ta.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_6_sos.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_10_ta.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_10_sos.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/aldebaran_cap.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_9_4_3_rlc.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_9_4_3_mec.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_imu.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_imu.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_rlc.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_mec.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_me.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_pfp.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_rlc.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mec.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_me.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_pfp.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_0_toc.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_0_rlc_1.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/sdma_4_4_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/sdma_6_1_0.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/sdma_6_0_3.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_mes1.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_mes.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_mes1.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_mes_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_4_mes_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mes1.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mes_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mes.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_2_mes_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_1_mes_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_0_mes_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/vcn_4_0_5.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/vcn_4_0_3.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/vpe_6_1_0.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/smu_13_0_10.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/smu_13_0_6.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/smu_14_0_2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/dcn_3_5_1_dmcub.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/dcn_3_5_dmcub.bin for module amdgpu
please give me this solution...
Unable to find the kernel source tree 4:34
Update the header: sudo apt-get install linux-headers-`uname -r`
@@sysadmin102 I had same problem and after doing as u said it says
Uname-r command not found
3:58 after this reboot it doesnt automaticaly go into ctrl+alt+f1 and lounches nouveau anyways. What should I do?
If it doesn’t, then you weren’t successful disabled nouveau driver.
@@sysadmin102 i did everything same as you and checked 5 times did I spell everything right
@@ste1ee try startx
after the .run it says The NVIDIA driver appears to have been install previously using a different installer (i never did that). So its telling me to use debian packages rather than .run files and it terminates the install. so should i maybe use debian packages?
What distro are you using? Ubuntu?
No, Kali linux.@@sysadmin102
If it already installed on your system, what are trying to do then?
@@sysadmin102 its weird, it still says I’m using nouveau drivers.
I got my system back to normal, but no nvidia drivers. When I run the update-ramfs -u it gives me errors saying the line options nouveau modeset =0 is an issue
Is this for a dedicated GPU?
@@sysadmin102 yes, I have a GeForce rtx 2060 super
@@sysadmin102 any advice?
Need a few info:
1. Linux Distro:
2. Was you able to install the Nvidia driver package in ttl console?
3. Did you blacklist the nouveau driver?
check the blacklist-nouveau.conf configuration file in /etc/modprobe.d/. It should look like this:
blacklist nouveau
options nouveau modeset=0
check the system logs for more details about the error
dmesg | grep nouveau
journalctl -xe | grep nouveau
HI i'd like to ask if it works for debian 12, i not sure if it will vary that much from kali linux to debuan 12.
It’s the same process for all Debian. Kali Linux is based on Debian 12. The only issues is driver compatibility.
Everything goles we'll until I try to reboot like in the minute 4:42 and Perform the rest of the steps. Apparently reboot is not a command in debian and I ended up using sudo reboot.then reentered the console , However ,when I get to the steps of the minute 4:42 it says "you appear to be running an X server please exit X before installing" do you know what that could be?
@@sysadmin102 help plz
X server meaning you have Nvidia installed before. You need to remove it before attempting to install Nvidia Driver again. Search for Uninstall NVIDIA Driver on my channel.
Excuse me, this is possible to use on mint lmde? since its based on debian
Maybe. You will have to try. Make sure to create a backup, just in case.
@@sysadmin102 alright thank you,i did some adaptations and it worked fine.
That’s great!
Your English accent is pretty good.
Are you being sarcastic? 😂 Either way, thanks!
Hệ thống báo không tìm thấy nvida..tôi đã cài Kali linux qua VMware..giúp tôi với
Cai VMware thi lam gi ma thay NVIDIA.
@@sysadmin102 có cách nào ko bro 😥
@@GamePlay-hc6bb ko.
Cuda 1060ti
? 11000kb/s
11mpbs
What are you talking about?
sh command not found and also cant go to cli mode, it just keep exiting
Not sure what you mean by that
Why it gives me no such file
You have to create it your self. The the command in the video should create a file. If not, then check your typo
@@sysadmin102 Thank you very much 💙💙
i get error when i run sudo sh the nvidia file. it says disable x server?
Which mean you already has some version of NVIDIA installed on your system already. You have to uninstall the old driver first sudo nvidia-uninstall
When I type lspci | grep -i NVIDIA
I get nothing
Please help buddy
Try vga instead
@@sysadmin102all I get is this 00:0F.0 VGA Compatible controller :VMware SVGA ll Adapter
no nvidia or anything
@@sysadmin102 $ lspci -s 00:0f.0 -v
00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller])
Subsystem: VMware SVGA II Adapter
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at 1070 [size=16]
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities:
Kernel driver in use: vmwgfx
Kernel modules: vmwgfx
any idea whats happening here? so confused
@@sysadmin102I have NVIDIA GeForce RTX 3060 that works fine on my windows.
@@SoundinLikeThunder are you running this on virtual machine or ESXi?
مش شغاله علي usb kali live
لم يتم إنشاء الفيديو لـ kali Live
@@sysadmin102 ارجو عمل فديو ❤
Great video but I had to disable x server
The video was produced on system that didn’t have Nvidia drivers installed before
@@sysadmin102 some video about grub repair?! It will be great
I get error because live system
Not sure what “live system” mean
Running an OS from bootable USB
Such as KALI LINUX live
@@pranabanandabhanjababu9273 is this persistence USB? You can only do it if it’s persistence
@@sysadmin102 آيضا انا استعمل live USB kali ولم يعمل
Definitely nuked my system…
Should be able to fix from console mode
@@sysadmin102 I tried to get back to the ttl consol but the keyboard shortcut did not work
@@sysadmin102 I also tried the nvidia uninstall and it did not work
Video visibility is very poor
Ok. Then you can read my post instead
I'm using an outdated device and can see more than I need to.
Maybe buy a decent tablet or watch on a bigger screen... It is 1080 60fps after all.
@@sysadmin102 he was being ironic, nevermind🌝
Okay, so I think that I did everything as in video, but after reboot I get hub "my graphics card numbers" config failed, hub doesn't have any ports! (Err -19)
When doing initramfs I get lot's of "possible missing firmware ... For module amd gpu". I have ryzen 7900 integrated and 1660 ti
Okay. I knew that it may help, so I just deleted the text in the blacklist file and it went back to previous state, and the Operating system launched✌️
By the way, I'm new to linux, how do I delete that "blacklist" file from terminal? What would command look like?
sudo rm filename.text
Glad that you found your own solution!