@ashleybignell2366 yeah I sold out today, but I've put them into pre order so you can order one and it will be shipped as soon as new stock arrives. I'm expecting them back in by around the 20th September :)
I have an issue with my brother's nintendo switch I changed the IC power chip cause it stopped charging Soni switched it to a new one still nothing so I change the connecter still nothing not shortage either the only capacitor is one at the bottom of the connector where the card slot and the headphone jack goes I got the error 2101-0001 none of the wires are are sideways they are straight I need help lol
After seeing that I had to subscribe man didn't realise there was that many problems with ps5 have to admit it was awesome watching you do this awesome work my man glade I watched it nice bro nice 👍
I use epoxy that can take 500c to glue the replacement copper traces/pads into place. Takes 45 mins to become hard and 24 hours to cure. That way I have a stable pad for soldering. With wires you can hammer them flat. With solder solder braid you can do the same. Cut the trace and hammer the pad area flat.
I've found DPD to be the absolute best now for a few years. Unfortunately lately Royail mail has hit the floor. We only get 3 parcel deliveries a week due to staffing. Hermes being the worst and the other ones like yodel etc are as normal UPS are ok for small under 1kg packages. Going back to DPD I get the same driver. Same delivery time so he knows the round well and works with care! In fact a nice guy. I've also noticed multidrop delivery drivers are at a all time low (including Amazon) so hopefully it all picks up by Xmas or there might be a lot of upset kids when santa doesn't turn up on time 😢😮
@@MenaceMenuPat you said it there , same delivery driver for dpd, aslong as they know where you are , it ain't such a bad thing And how can royal mail be added, when never stated parcels out or in, and to accept that staffing levels are the reason Well that ain't even on the same chapter. In fact that's a seperate issue to be fair. But when they blattently ,don't care Here I've had delivery people , ranging from take aways , to amazon and even police, turn up at our address, because its such a maze of houses ,where I am . Yet they cannot blame ,Google maps even though thats absolutely sheet . But the deliveries , just ask one simple lazy ,question Number 4 ?? Not even, first full line of address. All companies may want to adopt the app what three words into the address line, Coz ppl are just pure lazy ,with brain use , These days ...
Must be just in your area cause I've had hundreds of deliveries from DPD and been perfect... and is one of my favourites as gives an hour time slot and lets you change delivery days
The Cod3r would u like to buy a Google pixel 6 pro water damage u can here the notification sounds but the screen does not light up at all. I think the phone needs a new screen but I'm not sure it comes with all the accessories and box
To be a fair vertical position demonstration I think you should put on some clear acryl on the APU like how it sits with the heatsink (or something clear where the liquid metal sticking). Maybe the liquid metal will sit on the lower edge or maybe it will flow equally on the surface because of the capillary action. Will be good to know. I have been using my PS5 vertically since day 1 for 3 years now without an issue. I think the liquid metal moves only when you move the console like lifting and placing on the stand. What I can imagine happening with the liquid metal is if you e.g. try to set the ketchup at the outlet by hitting it to the table upside down (the position how you normally squeeze it out).
Capillary action is much stronger than gravity in this case. Just ask a physician. It just doesn't make a difference if you place the PS5 vertical or horizontal.
@@batluckies liquid metal is not water, it weights much more and heat get it even more liquidy. all the ps5 opened have excess liquid on the same side, the bottom one if you use the console in vertical. You're denying the obvious.
I know nothing about consoles so this is a real question. Wouldn't the liquid metal moving around indicate not enough pressure being applied to the chip? I'm asking because I work on my own PC, and have watched a lot of videos where PC users will use liquid metal on their CPU heat spreaders, and have never seen this issue with them. Would this also be a concern for PC users with extended use? Unlike consoles PCs aren't designed to operate horizontally so we wouldn't be able to lay them down. Personally I just use thermal paste to avoid any of that nonsense, but I'm still really curious to know.
@@demontekdigital1704certainly a fair and genuinely placed question. I sure hope that someone answers this question for you! Best of luck with your pc as well!💪🤓
@@Alexander_Bahgheera Thank you for your kind words! The CPU I own doesn't get nearly hot enough to use liquid metal with it. I was just curious to know if insufficient mounting pressure could be the issue with consoles. Now that I think of it, the issue might also be coming from an even surface on the PS5's chip. Right now I'm using Thermal Grizzly Aeronaut because it's a bit less expensive than their Kryonaut, and runs about the same for my uses. I use it for both my CPU, and GPU chips. Unfortunately you can't really lap a bare chip, so little can be done to provide a truly flat surface for the heatsink to bond to, but one MIGHT be able to lap the heatsink, though it wouldn't do very much.
It's not bragging if it's true, mate. You do the best port repairs on TH-cam. Clean soldering every time and your drag technique is apparently becoming a topic of discussion on here.
A coating applied to an ENTIRE assembled populated board is what is referred to as conformal coating. "Conformal coating is a specially engineered polymeric film-forming product that protects circuit boards, components, and other electronic devices from harmful environmental conditions like moisture, thermal shock, static, vibration, and contamination." Solder mask is a coating applied to a new board BEFORE population to ensure solder only sticks to unmasked areas. Solder mask, solder stop mask or solder resist is a thin lacquer-like layer of polymer that is usually applied to the copper traces of a printed circuit board (PCB) for protection against oxidation and to prevent solder bridges from forming between closely spaced solder pads. No matter the number of people saying they are the same thing, THEY ARE NOT!! Two different things for two different purposes.
@@TheCod3r Hi, hope you did not take that as criticism. It wasn't. A lot of new people get confused as to what to use. These two things are in fact pretty close in nature, and could be used interchangeably with a few exceptions.
@josephroberts6027 buddy I'm not new to electronics. More to the point, you seem to have completely missed the fact I was trolling people for exactly this reason
The resistance should only effect signal strength and the currents of data signals are small. Length affects timing. Not sure how time sensitive these signals are, but I've seen traces do weird squiggly lines on pcbs and I cant think of a reason for those besides adding a time delay.
Best is to use a wire same thickness as the pin itself, that way you make an extension of the pin and not a weak as bridge. use plenty of solder and flux :P
Sorry for being old on your channel, but could you direct me on how to get your particular HDMI tester? I've got several that just checks for continuity in a cable, nothing that actually detects a signal output from a device. Thanks for your help. Great videos as well!
You're all good buddy, glad to help. Unfortunately I've sold out right now but you can pre order one if you want to make sure I can send one as soon as they come back in stock (on around the 20th of September). The link to the tester is www.consolefix.shop/products/consolefix-x-cmizapper-portable-hdmi-tester
Not being funny but if you were lying you would have done it already, good for you mate for finally finding one, and its a WD Black so Result! I have sold stuff to CEX/Cash Converters and forgot sd cards, game discs/cartridges so it was bound to happen. Some sellers (if they sell stuff an not a business), will leave stuff like that on purpose if they dont need it and just add a tenner or a score (£10-£20).
I bought a 3d printer, paid extra for RM to courier it as a large parcel and fragile... item arrived looked like it had been kicked to death inside the box and seller a practicing lawyer is having immense fun ripping RM a brand new one over it including the costs of replacing the smashed parts. I don't trust any of 'em tbh although my local Hermes chap is decent but he was telling me at the distro warehouses they treat parcels very badly.
I've worked for a big one of those post companies in one of their hubs and its not even malice or carelessness. The workload was just so high you can't be careful you got like a few seconds per package thats it. And sometimes the cartons are more like Papier-mâché not much you can do for those.
Similarly, I was a baggage handler and we loaded Royal Mail and ParcelForce packages onto aircraft. We would throw them across onto the conveyor belts and then into the containers (underarm and so they're not dropping from a height). The truth is if we lifted every large, heavy parcel and placed it down carefully, our knees and backs would be shot in no time. Pack your items with this in mind and don't simply rely on a 'FRAGILE' notice to get it there in one piece.
Playtime or serious either way I am happy for you that you actually keep your admins in check. I seen on some "pro" streamers and some regular ones too that basically the owners of the community pages getting cuc-ed by their mods, aka kept hostage. What ever they do or say is final while a normal and good person gets cancelled. Friends and me got banned on some places and even with screenshot and screen recorded + audio evidence against them shown to the owner, the owner simply ignored it and sided with their evil mods. If that is not being ignorant and held hostage then idk what is. On top of that they spread lies against people who got banned with zero evidence meanwhile luckily we have evidence against them. But still it's a waste of time and I can't believe someone would be so out of touch with life and do this to someone for sake of attention and power trippin or whatever else is their issue ... All that aside, I recently found your channel and really love what you do with the tech, you basically keep these demented machines alive since their creators and corporations cannot bother so this task remains on the regular plebs. We really live in crazy times.
Thanks bud. I agree with you there. My mods know they aren't above the rules and everyone is treated fairly. We joke around like in this case but I've banned mods for real in the past because they're either letting mod status get to their heads or thinking they can get away with murder (figuratively speaking lol). My mods are good people with a brain who think before they act and actually care about the community as a whole :)
Hey, i enjoy watching your videos, you helped me learn a lot and i'm very thankful for that But, can we have also a 2nd channel that contains shorter video format of 10-15mn repairs ? for when we don't have much time but would also love to watch the content
Yanno, by now I've seen tons of HDMI port repairs you've done, Phil, and I gotta ask; Are the HDMI ports on these consoles really that weak, or are people just that aggressive with plugging into them? I ask because I have three monitors, and 3 TVs, and I've never (knock on desk) had one break on me. I even have to plug in from under the monitors almost blindly because the ports are on the bottoms, and I still haven't broken them. This is not a me being better than everyone else thing (though I AM extremely careful.) I'm legit curious because either those ports are the cheapest ever made, or console owners are completely careless animals, LOL. I heavily lean towards the ports being cheap, and fragile.
To be honest I think it's a bit of both. These ports snap inside the port (the factory ones at least) but that's also a combination of being a weak port and too much force by the user. But Sony never learnt from the first gen PS4 and they used a port with no structural support on the back on the first revision. Personally I've only ever broken one port myself, that was on my own series x, buy in all honesty that was because I found out my lad was bullying his brother over my console and trying to claim it as his own, so I kicked the console off the stand lol
@@TheCod3r LOL, that's funny. The poor X box gets brutalized over two warring factions. My older grandson does that to his cousin, but it's not outright bullying. When it's Noah's turn he just doesn't give his cousin, Dexter his turn, and always says, "but I need to get to this level!" Yeah, turns out he's playing Fortnite. I told my daughter if she's letting him play Fortnite she ain't raising him right, and should be ashamed, LOL.
@demontekdigital1704 lol my kids are pretty much the same mate. To be fair they're old enough to play fortnite but still go to war with each other over who gets to play lol
Here's a link to the HDMI tester: www.consolefix.shop/products/consolefix-x-cmizapper-portable-hdmi-tester
Shop is showing out of stock, Any ideas when they they'll be back in?
@ashleybignell2366 yeah I sold out today, but I've put them into pre order so you can order one and it will be shipped as soon as new stock arrives. I'm expecting them back in by around the 20th September :)
I have an issue with my brother's nintendo switch I changed the IC power chip cause it stopped charging Soni switched it to a new one still nothing so I change the connecter still nothing not shortage either the only capacitor is one at the bottom of the connector where the card slot and the headphone jack goes I got the error 2101-0001 none of the wires are are sideways they are straight I need help lol
How much do you charge to fix a hdmi on a ps5
@@SLAPPY4241 I charge £50 plus return shipping for that bud
10:00 I've had my PS5 vertical since I bought it over 2yrs ago and never had an issue with it overheating or any other problems.
The young apprentice is really the wizard . fantastic vid , love watching you work , Almost therapeutic . Skillfully done .👍
Your content is great friend and I like how your interactive while you're doing what we can tell you enjoy. Get this man to a million subs.
After seeing that I had to subscribe man didn't realise there was that many problems with ps5 have to admit it was awesome watching you do this awesome work my man glade I watched it nice bro nice 👍
I use epoxy that can take 500c to glue the replacement copper traces/pads into place. Takes 45 mins to become hard and 24 hours to cure. That way I have a stable pad for soldering. With wires you can hammer them flat. With solder solder braid you can do the same. Cut the trace and hammer the pad area flat.
DPD’s motto “ If you pay peanuts you get monkeys “ never be surprised if your parcel has been thrown or even kicked across a warehouse 🤣
DPD are shockingly bad , I have had several bad experiences with them and its virtually impossible to contact anyone in the company to complain .
You are not the only one, DPD are not fit for purpose, truly a awful company
Are and if you get someone on chat service its a joke ....hermes are same
I’ve never had an issue, Hermes once delivered my new drill batteries to the bin….on bin day once 🥲
I've found DPD to be the absolute best now for a few years.
Unfortunately lately Royail mail has hit the floor. We only get 3 parcel deliveries a week due to staffing. Hermes being the worst and the other ones like yodel etc are as normal UPS are ok for small under 1kg packages.
Going back to DPD I get the same driver. Same delivery time so he knows the round well and works with care! In fact a nice guy. I've also noticed multidrop delivery drivers are at a all time low (including Amazon) so hopefully it all picks up by Xmas or there might be a lot of upset kids when santa doesn't turn up on time 😢😮
@@MenaceMenuPat you said it there , same delivery driver for dpd, aslong as they know where you are , it ain't such a bad thing
And how can royal mail be added, when never stated parcels out or in, and to accept that staffing levels are the reason
Well that ain't even on the same chapter.
In fact that's a seperate issue to be fair.
But when they blattently ,don't care
Here I've had delivery people , ranging from take aways , to amazon and even police, turn up at our address, because its such a maze of houses ,where I am .
Yet they cannot blame ,Google maps even though thats absolutely sheet .
But the deliveries , just ask one simple lazy ,question
Number 4 ??
Not even, first full line of address.
All companies may want to adopt the app what three words into the address line,
Coz ppl are just pure lazy ,with brain use ,
These days ...
I grew up one of seven , Playing your parents against each other was just life lol!
Very good work indeed. Do not worry about the plonkers in your list, let them fight over each other. Thank you for your good work on your podcast.
Finally! - I always hope you find one in these machines. Well Done
Allo, Phil. Lets see what you're into today.
Lol hey bud
You do make me laugh ! You are a good man Phil !
@TheCod3r I was thinking to myself yesterday, I haven't seen any of his videos pop up in a quite awhile, today this popped up LOL
Hey dude, you should invest in a fume hood and use it wisely, this way of repairing/soldering is bad for your health.
I have always had trouble with DPD they are totally inept and i refuse to use them anymore, Royal mail is much better, its worth the extra cost.
Nearly at a 100k subs, congrats Phil!
Must be just in your area cause I've had hundreds of deliveries from DPD and been perfect... and is one of my favourites as gives an hour time slot and lets you change delivery days
Do you fix cb radio
I think i may support my hdmi lead going into the PS5 , remove any strain however slight
in australia some deliveries from other states can take a few weeks
Next day delivery after 6 days that's crazy. If you're paying that much they should be on top of picking up the item
plug the SSD into a PC and check the write cycles.
The Cod3r would u like to buy a Google pixel 6 pro water damage u can here the notification sounds but the screen does not light up at all. I think the phone needs a new screen but I'm not sure it comes with all the accessories and box
I’m keeping the face plates but leaving the SSD. 🤪
🤣🤣 lol
To be a fair vertical position demonstration I think you should put on some clear acryl on the APU like how it sits with the heatsink (or something clear where the liquid metal sticking). Maybe the liquid metal will sit on the lower edge or maybe it will flow equally on the surface because of the capillary action. Will be good to know.
I have been using my PS5 vertically since day 1 for 3 years now without an issue.
I think the liquid metal moves only when you move the console like lifting and placing on the stand.
What I can imagine happening with the liquid metal is if you e.g. try to set the ketchup at the outlet by hitting it to the table upside down (the position how you normally squeeze it out).
Capillary action is much stronger than gravity in this case. Just ask a physician. It just doesn't make a difference if you place the PS5 vertical or horizontal.
@@batluckies liquid metal is not water, it weights much more and heat get it even more liquidy. all the ps5 opened have excess liquid on the same side, the bottom one if you use the console in vertical. You're denying the obvious.
I know nothing about consoles so this is a real question. Wouldn't the liquid metal moving around indicate not enough pressure being applied to the chip? I'm asking because I work on my own PC, and have watched a lot of videos where PC users will use liquid metal on their CPU heat spreaders, and have never seen this issue with them. Would this also be a concern for PC users with extended use? Unlike consoles PCs aren't designed to operate horizontally so we wouldn't be able to lay them down. Personally I just use thermal paste to avoid any of that nonsense, but I'm still really curious to know.
@@demontekdigital1704certainly a fair and genuinely placed question. I sure hope that someone answers this question for you! Best of luck with your pc as well!💪🤓
@@Alexander_Bahgheera Thank you for your kind words! The CPU I own doesn't get nearly hot enough to use liquid metal with it. I was just curious to know if insufficient mounting pressure could be the issue with consoles. Now that I think of it, the issue might also be coming from an even surface on the PS5's chip.
Right now I'm using Thermal Grizzly Aeronaut because it's a bit less expensive than their Kryonaut, and runs about the same for my uses. I use it for both my CPU, and GPU chips.
Unfortunately you can't really lap a bare chip, so little can be done to provide a truly flat surface for the heatsink to bond to, but one MIGHT be able to lap the heatsink, though it wouldn't do very much.
Western Digital SSD with heat sink
It's not bragging if it's true, mate. You do the best port repairs on TH-cam. Clean soldering every time and your drag technique is apparently becoming a topic of discussion on here.
Amen brother! 💪🤓
Do you have to use liquid metal? Why can't you go old skool with thermal paste
Creeping ever closer to 100k
@TheCod3r DO you have to use the liquid metal? Or could you use another high end thermal compound that isn't so runny and conductive?
A coating applied to an ENTIRE assembled populated board is what is referred to as conformal coating.
"Conformal coating is a specially engineered polymeric film-forming product that protects circuit boards, components, and other electronic devices from harmful environmental conditions like moisture, thermal shock, static, vibration, and contamination."
Solder mask is a coating applied to a new board BEFORE population to ensure solder only sticks to unmasked areas.
Solder mask, solder stop mask or solder resist is a thin lacquer-like layer of polymer that is usually applied to the copper traces of a printed circuit board (PCB) for protection against oxidation and to prevent solder bridges from forming between closely spaced solder pads.
No matter the number of people saying they are the same thing, THEY ARE NOT!!
Two different things for two different purposes.
It doesn't matter, mine is branded as conformal coating so it's conformal coating
@@TheCod3r
Hi, hope you did not take that as criticism. It wasn't. A lot of new people get confused as to what to use. These two things are in fact pretty close in nature, and could be used interchangeably with a few exceptions.
@josephroberts6027 buddy I'm not new to electronics. More to the point, you seem to have completely missed the fact I was trolling people for exactly this reason
Thats a nice SSD crazy someone left that in
Does the length of the bridge wire really matter that much given that your wire has a different gauge/resistance when compared to the original trace?
The resistance should only effect signal strength and the currents of data signals are small. Length affects timing. Not sure how time sensitive these signals are, but I've seen traces do weird squiggly lines on pcbs and I cant think of a reason for those besides adding a time delay.
Best is to use a wire same thickness as the pin itself, that way you make an extension of the pin and not a weak as bridge. use plenty of solder and flux :P
"please do not buy if you have low or zero feedback", that's rather specific..
Good job Phil
yup halleluya nice work from a obvious pro
Sorry for being old on your channel, but could you direct me on how to get your particular HDMI tester? I've got several that just checks for continuity in a cable, nothing that actually detects a signal output from a device. Thanks for your help. Great videos as well!
You're all good buddy, glad to help. Unfortunately I've sold out right now but you can pre order one if you want to make sure I can send one as soon as they come back in stock (on around the 20th of September). The link to the tester is www.consolefix.shop/products/consolefix-x-cmizapper-portable-hdmi-tester
Not being funny but if you were lying you would have done it already, good for you mate for finally finding one, and its a WD Black so Result! I have sold stuff to CEX/Cash Converters and forgot sd cards, game discs/cartridges so it was bound to happen. Some sellers (if they sell stuff an not a business), will leave stuff like that on purpose if they dont need it and just add a tenner or a score (£10-£20).
I like all consoles, but the liquid metal dry spots on the ps5 is a big turn off. I mean, I don't have either the ps5 nor xbox series money though
Have you ever received a banned console and if you did is it possible to unban it?
No you can't unban a banned console if it was a permanent or a console ban hope that helps
This is like the 20th one you've said you're keeping for yourself. What are you doing with them all?
I end up selling them to customers who want a board swap 🤣
Hi do you fix motherboards please.
Finally u got an SSD yeahhh😂🎉🎉
Nice repair job.
I bought a 3d printer, paid extra for RM to courier it as a large parcel and fragile... item arrived looked like it had been kicked to death inside the box and seller a practicing lawyer is having immense fun ripping RM a brand new one over it including the costs of replacing the smashed parts. I don't trust any of 'em tbh although my local Hermes chap is decent but he was telling me at the distro warehouses they treat parcels very badly.
I've worked for a big one of those post companies in one of their hubs and its not even malice or carelessness. The workload was just so high you can't be careful you got like a few seconds per package thats it. And sometimes the cartons are more like Papier-mâché not much you can do for those.
Similarly, I was a baggage handler and we loaded Royal Mail and ParcelForce packages onto aircraft. We would throw them across onto the conveyor belts and then into the containers (underarm and so they're not dropping from a height). The truth is if we lifted every large, heavy parcel and placed it down carefully, our knees and backs would be shot in no time. Pack your items with this in mind and don't simply rely on a 'FRAGILE' notice to get it there in one piece.
Can u fix gpu graphics cards with green lines
Nice work!
Well it's about time ... woohoo !
Good job enjoyed watching. Love your videos always learn something
Playtime or serious either way I am happy for you that you actually keep your admins in check.
I seen on some "pro" streamers and some regular ones too that basically the owners of the community pages getting cuc-ed by their mods, aka kept hostage. What ever they do or say is final while a normal and good person gets cancelled.
Friends and me got banned on some places and even with screenshot and screen recorded + audio evidence against them shown to the owner, the owner simply ignored it and sided with their evil mods. If that is not being ignorant and held hostage then idk what is.
On top of that they spread lies against people who got banned with zero evidence meanwhile luckily we have evidence against them. But still it's a waste of time and I can't believe someone would be so out of touch with life and do this to someone for sake of attention and power trippin or whatever else is their issue ...
All that aside, I recently found your channel and really love what you do with the tech, you basically keep these demented machines alive since their creators and corporations cannot bother so this task remains on the regular plebs. We really live in crazy times.
Thanks bud. I agree with you there. My mods know they aren't above the rules and everyone is treated fairly. We joke around like in this case but I've banned mods for real in the past because they're either letting mod status get to their heads or thinking they can get away with murder (figuratively speaking lol). My mods are good people with a brain who think before they act and actually care about the community as a whole :)
I don’t like DPD either, great work on the PS5
hi fella can you please tell me the problem with having fifa on any console would love to now just a heads up thank Dave
It's just a joke mate. Fifa players are known for raging and breaking their consoles when they lose lol
Yoooo, finally a free SSD! 😁
Is dpb the department of buildings? Lol
Lol not making fun of you guys but I always find it funny how ppl in the UK say h or pronounce words with h
Everyone even the mods should be respectful. In my opinion at least
Yep I had the same problem
Is your locky day bro
It’s easy to make the mistake out of sight out of mind and all that
Ha ha fantastic bud so happy with your free ssd you can give it me now ha ha
Hey, i enjoy watching your videos, you helped me learn a lot and i'm very thankful for that
But, can we have also a 2nd channel that contains shorter video format of 10-15mn repairs ? for when we don't have much time but would also love to watch the content
Not additional memory ??
Cha ching 😂
@@TheCod3r finally, but it might be the reason why it broke loool
@@TheCod3r about time ! Yay !
wd black nooiiiccceee mate
No seller out there HAS to use ebay global shipping garbage, if they say they have to, they are lies!
FIFA the killer of all consoles...
The police said I'm not allowed to do wiggle tests anymore :(
Yanno, by now I've seen tons of HDMI port repairs you've done, Phil, and I gotta ask; Are the HDMI ports on these consoles really that weak, or are people just that aggressive with plugging into them? I ask because I have three monitors, and 3 TVs, and I've never (knock on desk) had one break on me. I even have to plug in from under the monitors almost blindly because the ports are on the bottoms, and I still haven't broken them.
This is not a me being better than everyone else thing (though I AM extremely careful.) I'm legit curious because either those ports are the cheapest ever made, or console owners are completely careless animals, LOL. I heavily lean towards the ports being cheap, and fragile.
To be honest I think it's a bit of both. These ports snap inside the port (the factory ones at least) but that's also a combination of being a weak port and too much force by the user. But Sony never learnt from the first gen PS4 and they used a port with no structural support on the back on the first revision. Personally I've only ever broken one port myself, that was on my own series x, buy in all honesty that was because I found out my lad was bullying his brother over my console and trying to claim it as his own, so I kicked the console off the stand lol
@@TheCod3r LOL, that's funny. The poor X box gets brutalized over two warring factions.
My older grandson does that to his cousin, but it's not outright bullying. When it's Noah's turn he just doesn't give his cousin, Dexter his turn, and always says, "but I need to get to this level!" Yeah, turns out he's playing Fortnite. I told my daughter if she's letting him play Fortnite she ain't raising him right, and should be ashamed, LOL.
@demontekdigital1704 lol my kids are pretty much the same mate. To be fair they're old enough to play fortnite but still go to war with each other over who gets to play lol
@@TheCod3r Two pairs of boxing gloves. Whoever's still standing gets to play, LOL.
Came with it ITS MINE 😂
You paid money for a PlayStation that don't work?!?.... I would not take a working one for free!!!
Make me wanna put my Xbox flat 😂
That's awesome lol ssd
Oh ya well I got a free copy of fifa 21 In a series x😂😂😂😂😂😂😂😂
Me I would have been upset if I paid for next day I will complain to the delivery company I would
dpd lost my 2000£ laptop last week fummin, stilll waiting on a answer, delivered to wrong address, ologic repair,
Fifa i knew it!
That's mine poo!
💯💯👍👍👍👍
I’m trying to contact you, I would love to drop off my console instead of post it. I only live in Bilston
Sorry just seen this lol
@@TheCod3r haha no worries!
and that cost 200$ sir
Once a criminal hacker always a criminal hacker steeling from inocent people not good
Haha finally🥳🥳
it´s always the fifa players
Goldhen JB
It's not free ssd u did pay for the ps5 lol 😂
To me it looks like conformal mask
Ps 5 is basically PS4
You know what snitches get I’m only joking 🙃
FIFA lol my ps5 go no wares near fifa Games
Can you fix my ps5 please
This dude and fifa players 😂😂😂😂😂