The peak numbers are decent but the best part is the entire hp and tongue curves. You gained way more then 30 hp in many areas. I see the sane thing with the hellcat airbox and TB you don't see much gains at peak but the entire PowerBand esp down low there's huge gains as well as rpm speed increase
Thanks for the information. I was going to do ported heads and cams on 91 from full blown. But I’m just going to save that and do drop ins and go boosted. I was quoted 5800 for their stage 2 package but not worth the price for only 30hp. Your whip sounds mean!
Fullblown's Stage 2 package uses the Comp Cam. I bought the MMX Max Effort NA cam kit and brought it to them for install. Two different cams, two different horsepower numbers. And thanks man Edit: And if I remember correctly, their stage 2 package is E85 kit as well. I'm on 91 Octane pump gas
@@stillzg Also, FB Stage 2 has ported heads, so more horse power. I am on the fence too between drop in pistons and boost vs Stage 2 kit. Thanks for the pricing on the stage 2 kit.
Thanks man. I am tuned with HP Tuners so I got to figure out how to do all this tune loading. And thanks, great to know that I can do both 91 Tune and E85 and load them back and forth without going to a shop
hey man, i noticed you didn’t mention any upgraded intake manifold… and that’s a big part of upgrading your cam. without proper airflow delivery you’re killing gains and torque. port your 392 intake manifold and you’ll see more power
@@WellWellWellz stock heads already flow very efficiently, i gained a lot doing a ported intake manifold with a 88mm throttle body when i did my camshaft
@@Clutched392 ported BGE heads are where it’s at if you want the most power gained out of an N/A 6.4 build imo. That’s what’s up tho man sounds like you got a good build going!
What is the difference in hp between comp cam and MMX? I live 45 minutes away from Full-blown and will be getting some work done soon and still deciding on boosted/pistons or NA Stage 2.
I honestly don't know. Pretty much 80% of Cammed Mopars out there are using Comp 270 Cams, and peak horsepower numbers don't really matter. What matters most is how these cams perform throughout the entire powerband. Peak numbers are just for bragging rights and a sales pitch. You can probably call and ask Fullblown since they use Comp Cams as part of their Stage 2 package
Lightingtrendz Would not recommend though, they’re not water resistant so it’s only a matter of time before they malfunction. Happened to everyone I know that have them, even me
What do you consider fbo? Full bolt ons= exhaust, intake, and possibly heads/cams. Basically mods outside the motor that are bolted on. You have an intake, throttle body, headers, mid pipes, cams, and porting. That’s pretty much fbo… What else can you just bolt onto the car to make it faster??
I would think an underdrive pulley where the forums say people gain 10-20whp (supposedly) and a larger/aftermarket intake manifold which tbh I think is a waste of money. But yeah good question though, tbh in my experience the only NA mods that actually work with 6.4 Hemis are: Cammed Setup Long Tube Headers Setup E85 Setup All of which requiring a tune
@@AirsoftHemi when i had a z28 a larger intake manifold and throttle body were worth 20+rwhp. I would skip the underdrive pulley if I were you. I did it on a couple of vehicles and it was really worth it IMO. If I were you, I would get bigger intake manifold and maybe a 90mm+ tb. That should help mid and up top with your cam. 💪🏾👊🏾✊🏾
How much lower do these mustang dyno’s run? I have longtube headers catted midpipes, catback exhaust, cold air intake and I made 468 to the wheels on the dyno
I heard about that. Tbh I don't know the backstory, but that's another reason why i have no plans on going boosted. The 6.4 hemis are extremely reliable staying NA
Did you ever get you car dyno where you got your headers. There you were at 460/464. Wonder if your at 490/485 now. Is gain with cam worth it over headers? I am thinking tune and cam only build since stock headers are pretty good
Tbh, a true E85 conversion kit will be the best bang for your buck. My 91 Octane (at the time) Cammed Scatpack just recently got "walked" by two E85/Headers Scatpacks in a 3-way race. Doing the research, E85 Scatpacks are making more gains than Cammed Scatpacks on the dyno from TH-cam videos I've seen.
Got a question did you take off your borla S type cause on the other vid you was saying you had a mid muffler delete I got the s type thinking about taking it off
I have the entire borla s-type catback exhaust system, which consists of all the pipes as well. When I got the mid-muffler delete, they just removed the mufflers, but the borla pipes are still there
@@AirsoftHemi So it looks like you have done the pcm unlock, the tune, the cam, the headers, E85 with Re-tune. Aren’t you almost maxed out for bolt on mods? Next would be Stroker kit or Forged internals with. SC?
@@larrykimmonsjr8041 Im done with performance mods tbh. All that’s left for me NA is aftermarket Ported Heads, Intake manifold or a Stroker Kit, all of which costs more than what I’m willing to pay. At least the cam sounds good Edit: I also have the JLT CAI and 87mm throttle body
@@AirsoftHemi ah ok lmao 🤣 thank you, bro I need some help I’m getting LT Headers and Catless midpipes, how can I make it pass emission, do you recommend me getting catless or catted ? Wich ones are louder ?
@@grady8218 if you’re in California you can’t pass emission with LT headers. any other state I would recommend kooks LT Headers with their GREEN catted high flow midpipes
The peak numbers are decent but the best part is the entire hp and tongue curves. You gained way more then 30 hp in many areas. I see the sane thing with the hellcat airbox and TB you don't see much gains at peak but the entire PowerBand esp down low there's huge gains as well as rpm speed increase
you can get a proflex commander from advanced fuel dynamics. it's a full flex fuel kit that you can run full e85 or 91 or blend them both
I recently went ahead with a full E85 Kit including Hellcat Injectors, Fuel Pump, and Retune. It is night and day difference. Fast af now
@@AirsoftHemi sheeeesh! glad you like the new setup. e85 really wakes up these cars!
Great job on the video! Had a ported manifold and JLT CAI installed last year. Going E85 with LTH next!
Those lights never get old 🤤😍
Lmao it was actually an old comment from you that said to showcase the lights when doing these kind of videos
@@AirsoftHemi they look sooooo good. Thanks for taking the constructive criticism
Love the build man sounds nasty 🔥🔥🔥
Lot of money spent for only 32hp but I love the car and it's sound
HOW WAS THIS CAM ? HOW DID IT HOLD UP? AND HOW MUCH FROM STOCK CAM SHAFT DID YOU NOTICED
Thanks for the information. I was going to do ported heads and cams on 91 from full blown. But I’m just going to save that and do drop ins and go boosted. I was quoted 5800 for their stage 2 package but not worth the price for only 30hp. Your whip sounds mean!
Fullblown's Stage 2 package uses the Comp Cam. I bought the MMX Max Effort NA cam kit and brought it to them for install. Two different cams, two different horsepower numbers. And thanks man
Edit: And if I remember correctly, their stage 2 package is E85 kit as well. I'm on 91 Octane pump gas
@@AirsoftHemi gotcha !!! Missed that lol! Thanks! Still on the fence !
@@stillzg Also, FB Stage 2 has ported heads, so more horse power. I am on the fence too between drop in pistons and boost vs Stage 2 kit. Thanks for the pricing on the stage 2 kit.
Hey iam in philly we have a great mopar shop hhp performance in Delaware they do 93 tune and also e85 on Diablo so yes you can do both
Thanks man. I am tuned with HP Tuners so I got to figure out how to do all this tune loading. And thanks, great to know that I can do both 91 Tune and E85 and load them back and forth without going to a shop
hey man, i noticed you didn’t mention any upgraded intake manifold… and that’s a big part of upgrading your cam. without proper airflow delivery you’re killing gains and torque. port your 392 intake manifold and you’ll see more power
Ported intake manifold does no good without ported heads.
@@WellWellWellz stock heads already flow very efficiently, i gained a lot doing a ported intake manifold with a 88mm throttle body when i did my camshaft
@@Clutched392 ported BGE heads are where it’s at if you want the most power gained out of an N/A 6.4 build imo. That’s what’s up tho man sounds like you got a good build going!
What is the difference in hp between comp cam and MMX? I live 45 minutes away from Full-blown and will be getting some work done soon and still deciding on boosted/pistons or NA Stage 2.
I honestly don't know. Pretty much 80% of Cammed Mopars out there are using Comp 270 Cams, and peak horsepower numbers don't really matter. What matters most is how these cams perform throughout the entire powerband. Peak numbers are just for bragging rights and a sales pitch. You can probably call and ask Fullblown since they use Comp Cams as part of their Stage 2 package
Great video
My 2020 Dodge Challenger wide body scat pack 392 thinking 🤔 about doing the same thing.
It's definitely worth it tbh. But from personal experience, E85 conversion kit will give a bigger gain than a Mild Cam.
Yo just found ur channel on gta online
Lol yeah that was me trolling on the Yacht 🤣🤣
I like your headlights and car. Other than that, I'm lost. Just being truthful. Sweet ride.
Thank you. I appreciate the kind comment
@@AirsoftHemi My pleasure
Dope car. I thought you were going to be at 450 hp with the cam
450 with a MAX Effort Cam….. hell no lol
Where you get your head lights from?
Lightingtrendz
Would not recommend though, they’re not water resistant so it’s only a matter of time before they malfunction. Happened to everyone I know that have them, even me
Hey Bro great video. When you did the camm did they port your heads and mds delete?
I honestly don't know. The car is running great so I never bothered to ask
What do you consider fbo? Full bolt ons= exhaust, intake, and possibly heads/cams. Basically mods outside the motor that are bolted on. You have an intake, throttle body, headers, mid pipes, cams, and porting. That’s pretty much fbo… What else can you just bolt onto the car to make it faster??
I would think an underdrive pulley where the forums say people gain 10-20whp (supposedly) and a larger/aftermarket intake manifold which tbh I think is a waste of money.
But yeah good question though, tbh in my experience the only NA mods that actually work with 6.4 Hemis are:
Cammed Setup
Long Tube Headers Setup
E85 Setup
All of which requiring a tune
@@AirsoftHemi when i had a z28 a larger intake manifold and throttle body were worth 20+rwhp. I would skip the underdrive pulley if I were you. I did it on a couple of vehicles and it was really worth it IMO.
If I were you, I would get bigger intake manifold and maybe a 90mm+ tb. That should help mid and up top with your cam. 💪🏾👊🏾✊🏾
How much lower do these mustang dyno’s run? I have longtube headers catted midpipes, catback exhaust, cold air intake and I made 468 to the wheels on the dyno
My LT Headers Scatpack was 460whp on a Dynojet and 401whp on a Mustang Dyno w/ JLT CAI and 87mm Throttle Body added on too
I dyno'd at 438hp and 442 at GTR in SoCal Rancho Cucamonga and they use a Dynojet. Stock 2018 Charger Scatpack.
Wasn't that the same shop tallguy was going to? I think he blew the motor in the owners track hawk
I heard about that. Tbh I don't know the backstory, but that's another reason why i have no plans on going boosted. The 6.4 hemis are extremely reliable staying NA
Did you ever get you car dyno where you got your headers. There you were at 460/464. Wonder if your at 490/485 now. Is gain with cam worth it over headers? I am thinking tune and cam only build since stock headers are pretty good
Tbh, a true E85 conversion kit will be the best bang for your buck. My 91 Octane (at the time) Cammed Scatpack just recently got "walked" by two E85/Headers Scatpacks in a 3-way race.
Doing the research, E85 Scatpacks are making more gains than Cammed Scatpacks on the dyno from TH-cam videos I've seen.
How much was the total cost? Parts and labor
3k for install, porting, labor and dyno tune
About $1600 for the MMX Max Effort NA Camshaft kit
Got a question did you take off your borla S type cause on the other vid you was saying you had a mid muffler delete I got the s type thinking about taking it off
I have the entire borla s-type catback exhaust system, which consists of all the pipes as well. When I got the mid-muffler delete, they just removed the mufflers, but the borla pipes are still there
@@AirsoftHemi yeah I just cut off the mid mufflers today too I got long tube headers with high flow cats night and day difference
@@brandonUwanawich954 Dope. You almost have the same setup as I do
If you could do it again would you just go supercharger
Nah, supercharger costs twice as much as my NA build and will still require forged internals. At that price point I’d rather just get a Hellcat
@@AirsoftHemi thanks for being honest
niceeee!
😎😎
So with long tubes and a cam and tune your @ 432 rwhp? Is that what your were expecting? 👍🏻
On a Mustang Dyno, yessir that is good news being on regular 91 Octane pump gas. That's about 470-480whp on a Dynojet Dyno
@@mokylarry1525 Thank you. I've experimented with all 3 types of Dynos
- Dynojet Dyno (generous dyno)
- Dynocom Dyno (inaccurate af)
- Mustang Dyno (realistic dyno)
I erased you can erase I looked up now I get it wit dyno I slept on that
432 is like stock mustang numbers 😂
Mustang Dyno =/= DynoJet Dyno numbers
Any new mods to the car? Your car is a 392 correct?
Just an E85 setup and re-tune. Car still runs great
@@AirsoftHemi So it looks like you have done the pcm unlock, the tune, the cam, the headers, E85 with Re-tune. Aren’t you almost maxed out for bolt on mods? Next would be Stroker kit or Forged internals with. SC?
@@larrykimmonsjr8041 Im done with performance mods tbh. All that’s left for me NA is aftermarket Ported Heads, Intake manifold or a Stroker Kit, all of which costs more than what I’m willing to pay. At least the cam sounds good
Edit: I also have the JLT CAI and 87mm throttle body
Did you ever make 500RWHP
Where did you get your headlights?
I got them from lightingtrendz. I do “not” recommend buying them
@@AirsoftHemi ah ok lmao 🤣 thank you, bro I need some help I’m getting LT Headers and Catless midpipes, how can I make it pass emission, do you recommend me getting catless or catted ? Wich ones are louder ?
@@grady8218 if you’re in California you can’t pass emission with LT headers. any other state I would recommend kooks LT Headers with their GREEN catted high flow midpipes
@@AirsoftHemi I’m one texas 👍the green high flow mids are so expensive, are they loud ?