Nice footage and flying. Just purchased a Dji Avata recently and now I'm totally hooked into fpv. Practiced in the simulator for acro mode and have a Pavo20 on the way. I'm loving this shit.
Thank you. We understand the feeling, the drone addiction is only going to get worse and lead you storage places. Follow the white rabbit and all will be well! Good luck on the journey and we look forward to seeing some amazing footage in the future. Happy flying from 🏴
Nice job Jack, I haven't flown it enough to a) test its penetration/signal and looking at that gully shot it did a great job. b) I've not seen the camera shake but I had literally just finished it before I dropped it off so not flown it in anger. There is a USB extension which means you DON'T have to take the frame apart, but I had not fitted that bit as my plan is to just notch out the frame to access the USB of the O3 unit directly. Pleased you enjoyed it. I found flying at about 13 degree camera angle in sport mode (wide) the props went away, acro never an issue. I built this specifically to carry a Hero 11 Mini, but have modded it to now just mount a naked gopro.
Majestic footage. At first I thought it was shooting down the Grey Mare's Tail, but no, it just got better. Can you do a close, in and out, look all over the Scot Monument? Would Comie Pool to coms mast on Blackford hill be tricky with regs. and such? Thanks.
Hi James, we do all this for free so try not to over expect from people on TH-cam. Here is a link to where you can buy - www.axisflying.com/axisflying-avata-35-frame-kit-for-dji-avata-to-get-more-powerful-p4662112.html We complete the modification for pilot's in the UK. Many thanks and happy flying. Hope you enjoyed the video
@@negraof - www.edinburghdronecompany.co.uk/axisflying/ Custom avata 1 is one of our favourite hybrid crafts. Axis flying also do full FPV drones so we advise learning to fly full manual for maximum enjoyment and excitement
I've been wanting to try the 3.5axis but I'm not a solderer. I fly with the 3 blade MAS props which definitely improve the stock experience but the yaw washout is very much still present.
Very nice Sir. I'm great flying in Sport mode But not so in manual. Would mine sharing your flight settings? (rates) It will be most appreciated. Thank you Sir
Hello, do not worry about rates and things like that. Use a simulator to master full manual mode first. Dji Virtual Flight is a good one and link to dji goggles. If nervous, buy a basic internal manual drone to practice with first. Something like the betaFPV Cetus. Good luck
Buy direct - www.axisflying.com/axisflying-avata-35-frame-kit-for-dji-avata-to-get-more-powerful-p4662112.html We complete upgrades for UK residents including labour and extras. Email - info@edinburghdronecompany.co.uk Thank you for kind words
Morning, Ginbalair is a service provider so use him for pilot duties. We supply and modify kit in the UK. We are an axis fly dealer so can source the parts and complete modification by supplying a brand new avata, supplying a used model or receiving your avata to change. Email us - info@edinburghdronecompany.co.uk
It was my build, I always run the footage through Gyroflow, I use a Gopro on top which gives better performance but I have not seen the micro vibrations that Jack spoke about.
AMAZINGLY BRILLIANT thanks. Cheers from Western Australia
Appreciate the kind words. Hello from Scotland 🏴
Nice footage and flying. Just purchased a Dji Avata recently and now I'm totally hooked into fpv. Practiced in the simulator for acro mode and have a Pavo20 on the way. I'm loving this shit.
Thank you. We understand the feeling, the drone addiction is only going to get worse and lead you storage places.
Follow the white rabbit and all will be well! Good luck on the journey and we look forward to seeing some amazing footage in the future.
Happy flying from 🏴
Nice job 👍
That reception you're getting though WOW -
Standard DJI setup on the 03 air unit.
Nice job Jack, I haven't flown it enough to
a) test its penetration/signal and looking at that gully shot it did a great job.
b) I've not seen the camera shake but I had literally just finished it before I dropped it off so not flown it in anger.
There is a USB extension which means you DON'T have to take the frame apart, but I had not fitted that bit as my plan is to just notch out the frame to access the USB of the O3 unit directly. Pleased you enjoyed it. I found flying at about 13 degree camera angle in sport mode (wide) the props went away, acro never an issue. I built this specifically to carry a Hero 11 Mini, but have modded it to now just mount a naked gopro.
Cool !
Axisflying kit is not lighter its heavier than standard avata
The heavier your avata the better. Add gopro will increase its weight, but better for flying
Hi, is the Motor overload the only error in the Display?
Or there any more?
Majestic footage. At first I thought it was shooting down the Grey Mare's Tail, but no, it just got better.
Can you do a close, in and out, look all over the Scot Monument? Would Comie Pool to coms mast on Blackford hill be tricky with regs. and such? Thanks.
You lost me in the second half of your comment..not gonna lie..
How loud is te new kit ….what is the cost of new kit…..i dont see a link to answer these questions. At least tell me where I can buy the kit!!
Hi James, we do all this for free so try not to over expect from people on TH-cam.
Here is a link to where you can buy - www.axisflying.com/axisflying-avata-35-frame-kit-for-dji-avata-to-get-more-powerful-p4662112.html
We complete the modification for pilot's in the UK.
Many thanks and happy flying. Hope you enjoyed the video
its much quieter than the original avatar, does not scream as much
Nice job on the custom, can you send me some more details on what you did to it
Do you prefer avata 1 custom or avata 2? Amazing video. Do you have the link for me custom too. Thank you
@@negraof - www.edinburghdronecompany.co.uk/axisflying/
Custom avata 1 is one of our favourite hybrid crafts. Axis flying also do full FPV drones so we advise learning to fly full manual for maximum enjoyment and excitement
I've been wanting to try the 3.5axis but I'm not a solderer. I fly with the 3 blade MAS props which definitely improve the stock experience but the yaw washout is very much still present.
We can complete the work for you should you wish to give it a bash!
Very nice Sir. I'm great flying in Sport mode But not so in manual. Would mine sharing your flight settings? (rates) It will be most appreciated. Thank you Sir
Hello, do not worry about rates and things like that.
Use a simulator to master full manual mode first. Dji Virtual Flight is a good one and link to dji goggles.
If nervous, buy a basic internal manual drone to practice with first. Something like the betaFPV Cetus.
Good luck
Great video, thanks for sharing. How can one get their hands on the custom kit?
Buy direct - www.axisflying.com/axisflying-avata-35-frame-kit-for-dji-avata-to-get-more-powerful-p4662112.html
We complete upgrades for UK residents including labour and extras.
Email - info@edinburghdronecompany.co.uk
Thank you for kind words
Is the custom Avatar available commercially now? If so, is it from you or @gimbalair?
Morning, Ginbalair is a service provider so use him for pilot duties.
We supply and modify kit in the UK.
We are an axis fly dealer so can source the parts and complete modification by supplying a brand new avata, supplying a used model or receiving your avata to change.
Email us - info@edinburghdronecompany.co.uk
What is about gyroflow ? Because of the wigeling footage do U use IT and does IT Work after the Upgrade as well ?
It was my build, I always run the footage through Gyroflow, I use a Gopro on top which gives better performance but I have not seen the micro vibrations that Jack spoke about.
The A V ata is super drone the footage is mazing, but Avata is absolutely no good for truly cinematic. Nice video love your honest review
Appreciate and thank you.
Very few thousand pound ish tools are! For cinema work, we recommend crafts with heavier lifts for better cameras and speed.
Hi need to make contact to get help with my flying skills I'm in Edinburgh
Hello, pleasure to help you out. We offer training from beginner to advanced.
Info@edinburghdronecompany.co.uk
Many thanks and happy flying
I am Interested
I want to buy one
😍👍👍
Thank you 😊
@@edinburghdronecompany wc... 🙏
Thanks for saying Avata correctly ... Lol's
His pronunciation is AvaTAR. The correct is AvaTA. there is a system called Avatar.