Budget Sniper Shootout! Amoeba Striker vs. TM VSR-10 vs. TM L96 - RedWolf Airsoft RWTV
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- You asked for it, we delivered! Marck does a sniper rifle comparison video pitting some of the best budget sniper rifles against each other. Who will come out on top?!
Buy Here:
Amoeba Striker: tinyurl.com/y9...
TM VSR-10: tinyurl.com/yd...
TM L96: tinyurl.com/yc...
Striker Review: tinyurl.com/y7...
VSR-10 Review: tinyurl.com/ya...
Our Online Store: www.redwolfairs...
Our Blog: www.blog.redwo...
Our Facebook Page: / redwolfairsoft
Our Instagram: / redwolfairsoft
Our Ambassador: / redwolftim
Our Ambassador: / airsoftcaro. .
Our Presenter: / rwmarck
your moving the bench rest all over in the last test so its pretty pointless
i agree
Agreed Those strikers are amazing
Id love to see an ASG M40A3 Sportline in this.
Guys, you're trying too hard. No one will ever use a stock sniper rifle and VSR-10 is the absolute king in upgradeability.
Also, holy moly, Tim is RIPPED, man!
some people might use it stock for a couple of weeks depending on were they live, like in brazil the striker is avaible in a couple of locations for cheap but most of the uprgrades parts are sent from china so 2-4 weeks delivery, that also happen with the VSR and L96, but you are correct still , 99% will not use the gun stock
+Marcos 340 - That's rather short-sighted.
Think it in this way - we upgrade the gun because they suck in reliability. Conversely, if the gun itself is good, then there is no meaning (or at least no immediate need) to upgrade the parts as well. Which means you will spend less money into upgrading.
Not to mention parts are made under requirement. If the guns are popular then parts will be made for them - make the girls bend for you not bend down for them. VSR was born with (comparatively) exceptional performance and pricing when there were no reliable and cheap rifles, and it was still not serviceable at high power play stock, and AS-01 is filling that niche with steel sears.
Ya once you've dumped $1k into the fricken thing.
Given they had a $300 budget limit, I'd have liked to have seen them use the remaining money ($150 Striker, $120 VSR10, $25 L96) and upgrade/tune the guns as best they could. Then given us tests that actually matter for a sniper. Weight, noise, bolt draw weight, and performance/accuracy testing with a variety of weights of ammo. And yes, actually keeping the bench rest steady and still for the accuracy test.
So I get that promoting a competitor isn't amazing, but for the striker there is an entire suite of internal upgrades available. IHFY and Bespoke Airsoft provide a full host of compression parts, and Action Army Airsoft produces an excellent hop-unit. Further external parts are available through these sources as well. Couple that with an external direct-feed magazine and a stock TCD hop up and it's hard to beat the striker.
Sorry to blow the bubble of Gambit but Maple Leaf and PDI do make external upgrades for the VSR-10.
Just my two cents, I get it they run the same weight bbs through each gun to compare. But for a gun shooting 130 fps faster than the competition, they should have ran .32s or higher in the Striker to try and tame the high fps. Or off camera find what groups the best in each gun, then share the results. Obviously this video is out of date, because the internal parts/upgrades for the Striker have sky rocketed.
The VSR-10 is literally the AR-15 of Spring Sniper Rifles. Its the most upgradeable and has a cult followinng. The Striker however, is a much nicer tactical rifle with pretty good upgradeability. It’s only MAJOR flaw is the cylinder, but let’s face it; nobody is going to run a bone-stock rifle. With the right parts and the right shooter, you can outperform VSR-10 users
VSR 10 all the way. Mine's accurate and has decent range out of the box. It has so many options for upgrading :)
You all need to do an update to this. The striker now has just as many upgrades as the VSR10, and it's actually compatible with alit of VSR10 parts.
I built a TM L96 because I wanted to be different than the sea of VSR10’s out there. My L96 for whatever reason did not take well to upgrading and was very unreliable most of its life, but I will say when it worked it threw a .4 an incredible distance with precision. Next time I’ll just do a VSR10 again.
Oh my God... Tim has beefed up......
Little bit overkill.
Me when the striker starts beating the vsr-10
“I’m beginning to see a pattern I’m not so sure I like”
You all should make an update video for this. The point still stands, however there is now a ton of internal upgrades for the striker now, from trigger kits, pistons, cylinders, tales EAG springs, hop ups, and barrels. I recently purchased one (gen 2) first thing I upgraded was to an m170. Made it an absolute beast, now I'm waiting for the action army hop up. After that I'll have to pull some OT for the EDGI NEMO kit. Can't wait till this project is done.
Now that the striker has been out for a bit, i think it is a major contender against the VSR. Don't get me wrong, the VSR is an AMAZING sniper, but my Ares Striker EDGI Nemo is just as AMAZING.
Ohhh..... Tim bicep look nice..
gay
Gae
@@laowu8024 Ты расист! Ты расист! Ты расист!
@@bhante1345 Ты расист?! Ты расист?! Ты расист?!
Have to go for the VRS10. and you may be able to upgrade the Striker, but not higher than 500fps because of the small cylinder.
I run a striker with just m160 and stock everything , 2.10 J w/ .40 300ft+ ezpz stop the hate until you actually use one :D My only complaint with the striker is the sticky bolt beside that its fantastic.
The results would have probably been different if you used 32s becausebthe striker shoots much harder
I dont see why everyone is hating so much. Theyre just trying to come up with good content for us to enjoy. So just enjoy it! Nice video guys!
If only you guys added the echo 1 asr to the competition it is very consistent with accuracy and fps. The speed with the bolt and reload would be short pull but reload would be like the vsr-10. The upgrades and nearly the same as any l96 upgrade kit just only needs a different bolt style and it's practically the same
I strongly agree with this Striker Ares they took deep innovation in details...Thanks RedWolf team to do this test.
I need to decide whether I should get vsr-10 or L96
The striker had double the FPS of the other 2 rifles. You gotta use a heavier bb to get it accurate
but no one plays them stock they are all unplayeble and upgradet the alle coud have the same joule the vsr just have better aftermarket hopups and can hop hevyer bbs on distance
Krytac LVOA vs ics MARS vs asg SCORPION
Krytac LVOA ftw!
Why? Those are like three different classes....
Jerret Green ??? This are AEG’s... classes lol
Yeah I never mind it, if I had a choice I go with the Scorpion.
assura11 so, a Long gun vs long gun vs pistol caliber carbine? Makes sense
I don’t think using Tim to shoot the fastest is fair
That dude is jacked
You should watit till next episode when they try underwater GBB shooting with Michael Phelps
Just got my ares amoeba Striker ast-01 yesterday and I love it 😁😁😁 hitting a pole that’s 70(give or take) meters away with no optic every time (I’m getting a scope in a couple days)
Asg P-09 vs cybergun fnx 45 vs Tm hi capa 5.1
assura11 Yes please
I’ll answer, Tm hi CAPA, best upgradability. FNX for out of the box
Altho its been 3 years ago, make sure you upgrade the TM L96, its not a great gun out of the box, novritsch did a upgrade with his own parts if i remember correctly.. do the same !! happy airsofting guys ✌
I would love to see a comparison between the Scorpion Evo and the Krytac Kriss Vector! :)
Issue with the striker is it falls apart in a couple days of use... it is so, so, soo poor quality in its internals quality. Bolt and cylinder will literally come apart.
How about Cyma CM702? Good price, high fps out of the box, 485mm inner barrel, easy to upgrade. I got on and I'm 100% satisfied
What about the Well MB03?
I’ve noticed an audio quality dropped since a couple video from u guys. Is there anything wrong with mic or am I the only one who feels it?
Silverback srs gen 3 a1 22inch bullpup & ssg24
My TM VSR-10 with modular stock and full X-Fire/PDI internals + RHOP destroys all of these.
Also, comparing a stock VSR-10 and L96 to a gun 'already upgraded out of the box' like the Amoeba Striker is a bit unfair.
If it's like that out of the box i mean
All of them are OOTB, and if you upgrade them there's no meaning in comparing at all
VSR-10 and L96 model by Maruzen/Well are the best platforms at least in Europe. You can change everything basically to action army or airsoftpro parts. And the best part, you can get high quality hop up chambers that are TDC designed for a fair price, while using Maple leaf hop up and nubs you can get very long ranges with these platforms really. Getting 3 joule and 100 m is no problem with the parts that are available here.
How about the range? Isn't that kind of important for a sniper rifle?
Range will be based on muzzle velocity. Faster, the further it can reach.
The VSR should still be top. I actually run a Well MBO3. New piston, trigger group (upgraded to a 90°), M160 spring, 550mm 6.01mm inner barrel, Maple Leaf 510mm bull outer barrel, cheap suppressor to cover the rest of the inner barrel, Hawke Vantage + 3-9x50 scope on the top, low profile Maple Leaf safety and Excelvan lightweight 6-8" bipod. I'm getting 520fps, a 10" grouping at 80m with ARES diamond presision 0.4g BBs. The sling is nothing fancy, just a basic Viper sling with the clips removed and the sling connected by looping it through the adjusters. Base gun cost £80, it's not the best rifle ever but it works well enough for what I do. I've got two other cylinders set up with the same pistons however my black Teflon is set up with an M135 giving me about 450fps and the original cylinder is set up with a weak spring, about M100 producing 335fps for springer only CQB events.
Cylinder swaps are as easy as removing the stock, pulling the pin, sliding one cylinder out and the desired one in.
In my honest opinion, can a gun be really considered "good" if you have to slap on many other 3rd party parts which could end up having a cost 2-3x the original price of the rifle you based on?
While the system itself is good, the performance of the gun ended up having not much to do with its original build quality. Looking at your list (as well as mine), there is practically nothing left in both your and my VSR-10. The trigger is removed, the piston is replaced, the barrel group is replaced, it basically is a gun built upon an another gun. IMO that is an end result of throwing many quality parts together rather than the gun being really good. At least the Striker comes with a 90 degree sear and a pretty amazing build.
Never saw a better vs Vidieo
i have a vsr10 gspec completely upgraded and an amoeba striker as01 as backup so I'm good to go
Next comparison should be about DMRs
That m40 or steyr $80 springers would do pretty good
they are shit tbh. Not fully upgradable, while a mb01(90bucks btw) is the second best platform after the vsr10.
Guys this is just a test and it is conditional and we all know that we need to see alot of factors.. this is just a guide.. I believe striker deserves the spot because of its cheap price out of the box consistency.. compare to TM sniper rifles, you have to upgrade the unit for your satisfaction (after market sales)
Where's the love for Maruzen APS2 clones? Well L96 MB01 comes with 90* trigger sear stock at $135 with a scope. Shoots 200 ft at 430fps out the box. Replace piston, bucking, and use a 6.01 barrel to hit 480 fps with stock spring. That's only about $225 for gun, parts, and 40mm objective scope. If you ask me, that's the best BUDGET sniper. This was my first sniper, and it lasted years on stock plastic trigger box, plastic piston, and stock spring.
A 90* zero trigger for VSR10 will run you $100 and compatible piston for $35, which puts you at $295. Add $10 spring to fix fps, puts you at $305 and you don't even have a new inner barrel.
Would have been more tnteresting if you had used three different brands of the same rifle, I mean two TMs
The Ares Striker MAgazine is terrible. It never feeds the last three BBs and if you remove the magazine, three (or more) BBs fall out! Accuracy at 30m was way off as well even with an upgraded bolt and hop up. My old Daisy Red Ryder BB gun shoots better!
0:01 whats the name of the ak in the backround
Now try and see which gun joule creeps better. The flaw behind the Striker is it's extremely undervolumed and requires a TON of work to make it perform like a VSR with a few small upgrades. In my opinion, until the Striker can over come it's extremely low volume then it shouldn't even be considered
Try putting a short outer and inner barrel on it.
+Koala Tactical
yes, it requires more money, but not really more work. BUT you also have it much easier to reach high energy, because you can just throw in a stronger spring, which you wouldn't be able to pull in a VSR or L96, because of the long pull in those 2 guns.
And you don't need to make the volume bigger (since that would destroy the point of buying the striker), it works without that too.
You can have a striker + scope + EdGi dual bore barrel + EdGi cylinder kit + 2 extra mags for it + Action Army Hop unit + Action Army hop adjustment screw + PDI W hold hop rubber for about £800, which is pretty good considering that's a new gun, plus a full EdGi kit, and a decent optic. Though yes, the low cylinder volume is a concern for some, it's actually not a huge issue in the experience of most Striker users. The main issue with it is that the hop chamber is associated with poor QC, so the upgrade to the Action Army hop chamber is a must.
My striker was shooting 2.38j with .36s today. Idk how much a person really needs.
having a high cylinder volume isnt just about pushing out the high joules there are other reasons to do it for instance if you want to get the best performance out of heavy bbs (which will usually travel further than a lighter bb and more accurately) it requires a higher cylinder to barrel volume ratio... well if you have a smaller cylinder to start with that limits you to making an even shorter barrel and that can affect performance in its own right since the different weight bbs require a different barrel length to accelerate to full speed.... cutting it all short having a lower cylinder volume limits your performance with heavier bbs.
That Tokyo Marui isn't an L96. It's modeled after the Arctic Warfare which became the L118.
I have striker v2 change hop up chamber and it shoot very well, like this baby
I want to see the ares msr 338 performance pleeeease
Striker looks the best but i don't think that the it can beat the VSR on upgradability
Let's be honest, what are we really buying for the VSR anyway?
Chamber wise, the only chamber we use for the VSR is really the AA red chamber and the Striker has their AA blue chamber. (and add in the fact that the Striker's hop up, provided it's normal, does not leak nor curve while the VSR does with high powered springs)
Cylinder wise, there are multiple steel cylinders (Maple Leaf, AA, PDI) for the VSR and it uses specific springs where their are plenty, but the Striker also has its own steel cylinders (AA, Ares, Edgi) as well as uses AEG springs (which is practically the most plentiful part type in airsoft). Both doesn't handle very powerful springs.
Barrel group wise, they share buckings and barrels. Upgrade potential is identical in this aspect.
Handle and external wise, VSR has support from Maple Leaf, AA and PDI, while AA has support from Edgi, (also) AA and Ares themselves.
Trigger group wise, VSR has plenty while Ares is mostly reliant on Edgi, but Ares have steel sears and the Zero resistance spring guide from ML (which removes the need of a Zero trigger for reduced push/pull resistance). Striker stock is much stronger and feels tougher than the VSR.
And up to stock performance, VSR-10 cannot handle heavy springs while Striker does that on the brim.
VSR-10 uses pot metal for sears while Striker uses steel.
VSR-10 curves at long distance and under high power while the Striker doesn't.
Striker has bad QC while Marui's QC is unparalleled.
All in all, VSR has upgrades but so did the AS-01. At this current age there is nothing the Striker loses out in upgrades, and a gun that is heavily reliant on upgrades might as well be considered a failure.
Wait what about the different types of outer barrels and stock sets for the vsr!? You can get m40 stocks, bull barrels, tapered barrels, twisted tapered and bull barrels, different bolt handles, different bolts(both external and internal upgrades). Then the vsr has more upgrades than any other airsoft gun.. period...
And don’t get me started about the ares using aeg springs, and crap cylinder volume...... and for external upgrades you can change the color of some things.... oooooooohhh ahhhhh
Vsr10 is the king let’s be honest here
nah
I wouldn’t say I’m a sniper however as someone who runs an SVU and someone who did own an l96 before i accidentally broke in half falling down a bank
Good content but you guys might need to fix the volume of the sound properly?
Why not compare a TM VSR10-Amoeba striker-Well MB03-SSG24? Much more variety.
Because the SSG24 is an upgraded VSR 10 out of the box, so it would be extremely unfair.
budget sniper? A&K M24 all the way. Mod the cylinder for better seal, some compressors behind the spring for extra and maybe barrel lapping and TDC. About 100 USD for outstanding performance. Or toss in 20 more for Maple Leaf hop bucking and hop arm for something even better. Or go Maple Leaf all the way with a Crazy Jet barrel and have simply perfection at
out of production unfortunately
Please do a KJW M700 review!!!
my favourite airsoft sniper rifle is m98b
What hop up upgrade should I get for the as1 and or any recommendations to what I should eventually upgrade in the future?
Would rather have the Classic Army M24 LTR over any of the three you tested
Why is asg not here? Also the striker is expensive (not budget)
SIR1U5 how? It's 180.
Damn Tim been putting on work at the gym
definitely a promo for the Striker lolol
Exactly what I thought
I have both as vsr-10 clone and asg aw 308 sniper rifle which is very similar to the l96 in form factor.
Due to the body of my asg aw309 being alot more ergonomiic I like my asg aw308 sniper rifle aloter better thna my vsr10 clone
L96 vs BAR10 G-SPEC
Vfc scar H vs Tokyo marui Scar H
Guys - none of the tests shown are comparing rifles 👎👎👎 they compare how you handled the gun. Just look at the movement placed by the operator during reload, and when did speed of load/ cocking be a top requirement for a sniper rifle?
Overall - C+ (a nice try but could do much better if you tried)
is there gonna be an update for this same type of vid for recent bolt actions?
hahahha nice Gun stand. it shook and whibbled like a jellyfish
Haha, yes a bipod would be better...
I think it's a good note that the Stricker was double the FPS.
This is Worth asking again- How can a Higher Cylinder Volume be had on the Striker? ......this Needs to be solved or be able to Modify it in some way to give it Better Air Volume to be able to Push Heavier BB's out to Longer Range.....Any Solutions Guys ?
How about some Videos on this particular Upgrade anyone ? .....i like the Rifle, but would Love the Rifle if there were a Solution to the Air Volume issue.
2 ways:
1. Buy a bespoke which gives you an enlarged piston.
2. Use a shorter barrel to compensate for the lack of volume.
Or hope Amoeba releases an AS03 which comes with a VSR sized cylinder.
Great video 👌
Redwolf Airsoft all weapons from Tokyo Marui must have a accuracy under 1Joule. It's saying a Japan law. So you dont compare it. And the VSR-10 is better from Amoeba Strike. It's still a VSR-10😁
how many meters usually is the distance when you engage your enemy in an airsoft game?
I see Tim has been pumping iron
Wym I can name more upgrades for the vsr than the striker
No JG Bar10?
So this is a striker ad
The vsr is only bought to be upgraded so some of your test are flawed a little
Thoughts on the ASG MCMILLAN m40a3?
Shit
Wow, I would've though that sniper rifles were more accurate than this. Are there more accurate rifles than these?
Not on airsoft. You might want an airgun for that kind of accuracy.
Tim is sooooooooo buff now
So the striker is good at stock or how much do o have to upgrade it. Like a SSG24 is costing 520.. striker is costing me 180... what do you guys think ?
This video made most amoeba products increase it's price by 200% 😅😅😅
Vsr10 TM (not Gspec) or striker amoeba?
can u please put the striker back in stock
how much money you need to put on the vsr 10 in upgrade to make it worth it
can you do side arms next?
yo, tim's gotten bigger
Nobody runs stock unless its the m40a3 sportline. Tbat gun was nit made to be upgraded. You have to hunt for them and make physical modifications to some parts. Also for $80 not bad but the more expensive shit will beat it. O isnt know why you gave the striker a point for upgradability. I know its the new kid and we need to give it time but overall, you cant rate somthing thats new until upgrades and clones cone out. I basically knew the vsr 10 was getting a point for that. That gun is way too mainstream. The only reason people know the l96 exists is because of counterstrike(awp), pubg(awm), and fortnite (l96 [they dont tell you what each gun is but i dont play fortnite since i dont have access to a good enough computer and have a shit smartphone and i dont have xbox live gold so what would i know]). They're the same gun but different calibers. Not saying its the best. The vsr. 10 probabaly is but i go with the l96 for the memes.
Vsr 10, the greatest sniper ever!
No no no i Think i just clikt on The wrong video The TM Vsr 10 is alot better and how did The strikse just Got a point there in The upgradeability
If you're giving a tie, it goes to the l96. You can actually find everything you need to make it a monster like the vsr10 but vsr 10 parts are easier to find. At least the l96 isnt the m40a3 sportline. You have to hunt for those and even make physical modifications to the gun to upgrade the hopup.
L96 and VSR-10 are more iconic than the Amoeba
Unfortunately 2 best snipers out there atm are srsa1 and ssg24
Ssg24 is trash
budget gun dude
Clicking at 7:33 doesn’t do anything mark
What do I see In the back ground at 9:41 a lever action gun what is it
Nice video mate, thank you. like my Striker is very precision.
I have L96.. It's f***ing heavy to carry tho..