Love the camera, but the stock canopy should be replaced asap. It shifts as you see and it has 0 protection on top. There are a few decent options on Thingiverse to 3d print
I love happymodel and most of my drones are from them but damn, they gotta step up their stickergame. Can't believe that even 6 years later, they still look like this
12:57 in yes Nick I have the same problem breaking them there in the front. Thanks Nick great review! I already ordered one via banggood last week. Can't wait to get it here is flying great finally a mob7 hdzero that can compete with analog like flying performance 👍 awesome!!! Thanks Hdzero and Happymodel for that aio 🙏👍🫶😁
Nick burns uses a special military grade paint in his house that conduct the fpv signal. Nobody else has this video quality and even Carl Zero is jealous.
after 5 battery packs lost focus on my LUX camera on mobula6 after small crash in house. Adiitional protection is must have. there is stl's on thingsverse with different angles and a bit more protection
Hi Nick, Great video and review of the mobula 7 HD, I wish I had your reaction skills to fly inside, but it sure flys nice outside as well. Thanks for the video and info on this quad. 😅
@NickBurnsFPV According to other reviews I've seen, in general, but worsening as you go up in mah as expected. Could it be the tune? Or is this more the limit of what 1S can do...
Heavier batteries points out that you are still categorized as a NEWBIE TO FPV! Lolol 😉 It's not about flying an ultra light whoop with heavy batteries! It's about KEEPING an ultra light whoop, ultra light with lightweight batteries! It defeats the purpose and defeats the performance of these great ultra light whoops to use heavy batteries! Buy more batteries! Change often! It's all about power to weight ratio! Keep it light, silly Newbie! Lolol Happy holidays Bro! $ave big money... Buy the BetaFPV AIR65 or AIR75 for retail $95 and don't get ripped off by buying the HDZero goggles for over $700 with the 4 antennas and a battery you'll still need for them after you spend $600 on those worst value in the FPV goggles! 💯👎 Air65 has a super clear camera and a 400mw VTX so Nick flies his entire house crystal clear! Go search for that video he did a while back and watch how clear it is! Only not quite as sharp as the HDZero version but still amazing for an analog whoop!... And I just $aved you hundred of bucks! Analog for the win! 🎊🥳🎁🧑🎄😁🤘
@@zicada7661 Its typical that as the battery gets bigger and heavier there are diminishing returns on flight time and agility. Weight in nearly any way will have this impact.
Your Lookin Healthy My Man, Thanks For All The Work You Do Pumpin This Whoop Tastic Info Out For Us. Merry Christmas & Happy New Years To All....... PEACE ✌ ✌
Loved that "very graceful landing" 😂
lol. Yep, sometimes it happens
75mm BABY
YEAAAH! Big brother to ghost!
Love the camera, but the stock canopy should be replaced asap. It shifts as you see and it has 0 protection on top. There are a few decent options on Thingiverse to 3d print
Good review again Nick
Tempted to grab one of these and mount it with the board inverted in a Fractal 75 frame.
Omg call Peta he's bothering Squirrel again! 😂😂😂
trespassers!! :)
I love happymodel and most of my drones are from them but damn, they gotta step up their stickergame. Can't believe that even 6 years later, they still look like this
need to commission an artist, 100% agreed
Finally you review it!
It takes me a while. I don't review based on an afternoon or day of flights. Generally, it take two weeks or more.
12:57 in yes Nick I have the same problem breaking them there in the front. Thanks Nick great review! I already ordered one via banggood last week. Can't wait to get it here is flying great finally a mob7 hdzero that can compete with analog like flying performance 👍 awesome!!! Thanks Hdzero and Happymodel for that aio 🙏👍🫶😁
awsome thanks for posting!
Just got the air65 and waiting for it to come in? Anyone have any input on it?
I just got mine in! Haven't flown it yet, but oh so co0ol, small, and lightweight! Good choice! 😃
Fantastic flying and review, Nick! 😃
Merry Christmas!
Stay safe there with your family! 🖖😊
Love using the helmet idea!!! Out def saves the aio😅
Nick burns uses a special military grade paint in his house that conduct the fpv signal. Nobody else has this video quality and even Carl Zero is jealous.
lol, 100%
after 5 battery packs lost focus on my LUX camera on mobula6 after small crash in house. Adiitional protection is must have. there is stl's on thingsverse with different angles and a bit more protection
me too. I used a drop of instant glue to hold the focus, since than all good
I made a 3d printed adapter that allows me to mount the lux in the mob 6 canopy. All's right with the world!
That, indeed, is where all my whoop frames broke until I switched to the Cockroach V3.
For me its either the front or the back but always that upper support.
could you make a video to fulfill what Happymodel does not, Calibrating current sensor? please
thanks for what you do
Hi Nick, Great video and review of the mobula 7 HD, I wish I had your reaction skills to fly inside, but it sure flys nice outside as well. Thanks for the video and info on this quad. 😅
I saw that little elf up to no good in the lamp!
lol 100%. The other elf is taking a nap :)
Really hope an analog updated mobula7 is on the way too!
@@_tcmore maybe, but I have no word or other information on such a development.
so the only diff from the mob 6 is the frame?
No, motors and props as well.
Keep flying it so we get a 1000 batteries update on durability of the aio
man that would be some heavy tracking to ensure 1k was hit
The link to the HD zero goggles didn't work.
Resolved, thank you
@@NickBurnsFPVstill doesn’t work
@@samson_BNR32 turns out it was the emoji causing the issue.
Should have tested heavier batteries too, points out the lack of performance better..
lack of performance due to larger battery weight?
@NickBurnsFPV According to other reviews I've seen, in general, but worsening as you go up in mah as expected. Could it be the tune? Or is this more the limit of what 1S can do...
Heavier batteries points out that you are still categorized as a NEWBIE TO FPV! Lolol
😉
It's not about flying an ultra light whoop with heavy batteries! It's about KEEPING an ultra light whoop, ultra light with lightweight batteries! It defeats the purpose and defeats the performance of these great ultra light whoops to use heavy batteries! Buy more batteries! Change often!
It's all about power to weight ratio! Keep it light, silly Newbie! Lolol
Happy holidays Bro!
$ave big money... Buy the BetaFPV AIR65 or AIR75 for retail $95 and don't get ripped off by buying the HDZero goggles for over $700 with the 4 antennas and a battery you'll still need for them after you spend $600 on those worst value in the FPV goggles! 💯👎
Air65 has a super clear camera and a 400mw VTX so Nick flies his entire house crystal clear! Go search for that video he did a while back and watch how clear it is! Only not quite as sharp as the HDZero version but still amazing for an analog whoop!...
And I just $aved you hundred of bucks!
Analog for the win! 🎊🥳🎁🧑🎄😁🤘
@@zicada7661 Its typical that as the battery gets bigger and heavier there are diminishing returns on flight time and agility. Weight in nearly any way will have this impact.
Your Lookin Healthy My Man, Thanks For All The Work You Do Pumpin This Whoop Tastic Info Out For Us. Merry Christmas & Happy New Years To All....... PEACE ✌ ✌
lol I never run more than 25 mw lol too lazy to change from last race
if it works it works
@@NickBurnsFPV I run 802 33kkv on 65mm whoop D: I am excited for that 65mm battery video, because I do not get enough.
@@smika710 not sure it will fit for your flight style with those 33kv motors I suspect you like to run pretty hard.
@NickBurnsFPV yeah, I do the lux camera and aio5. I should probably be on a 75mm platform..
Mob7 battery tray has been loose for years 😂
I wonder if the tray size is why I tend to break the upper supports?
Finally! now I need HD0's
Second!
First lol