Paul, Thanks for showing this information on plasma sets. I have a Samsung plasma 1080p TV. It's working, but someday I may well need to be able to check the voltages to try and troubleshoot what the problem is. Tom
You are very informative, I am a technician also but I can't explain your experiences in electronics repair. Hope God give you more energy to continuous . thanks for your support
I find your videos very interesting. Thank you for sharing. It's hard to stay posative these days. Life is just a journey, ride it right and you get to go somewhere fantastic. That looks just like my TV. When I bought it they said that Plasma was the best. Sorry to hear they are fading out.
Good morning, my 50 inch plasma is failing to turn on yesterday. Red led is on and cycles off for a few seconds then goes back on when I use the remote. Tried another remote with same result. Going to open it up this afternoon and see what I find. This unit about 5 years old. Thanks for the tutorial!
Tech With Brett that way you put it does sound impressive. not sure why people sub my channel it's kinda boring. 😪 I guess some people like to fix electronics.
Is there a reason you didn't adjust Va voltage? Also, do you know what acceptable tolerances are for the various voltages printed on the sticker on the panel? Va, Ve, VScan, etc? Is 5% of the printed value acceptable, or 10%? Thanks!
thanks for ur video my upper buffer burn a ic i got another 1 an was told to check my vs an va but did tell me how to check it i think ur video help me out will see soon. oh i have a hitachi p50h401
Great video of plasma tv. The problem I am having is the missing voltage on the x sub-board was wondering what is the voltage going typical coming out of the ribbon going 8nto the panel I at the ribbon its 25 volts i know this is not right. have the 190 going into the x board
I have a Samsung Plasma TV here that is clicking and double flashing the stand by light. Double flash/ Pause Double flash/ pause about five times. No visible signs on any of the boards, like say bulging capacitors or scorch marks, and I haven't yet tested points with my multi meter but from what I have seen so far it is the power board. It is a 2011 model PS43D490A1WXXU.
The video was very informative, but it doesn't address the particular symptoms that we are experiencing with our Samsung 42" HPS 4253X/XAA. This Plasma TV has been installed on a TrippLite HT-1000UPS to eliminate power brown outs and surges and has given us very reliable service. The symptoms ONLY appear at start up in the morning. The entire screen is dimmed but the channel chosen is still visible but is grainy and the entire screen slightly pulsates for about 5 minutes and then the screen cleans up and then appears normal. I presume it to be a power supply related issue ? Possibly an electrolytic weakened with use ? The TV works great otherwise and I hate to discard it without trying a simple fix. Your feedback would be greatly appreciated. I'm a Ham Radio Operator since 1966 and have experience with soldering and circuit repair, but not much experience with flat screen repair ?
I've got a plasma tv that has pink/purple banding mostly over the white portion of tv picture. What do you think is causing it and where should I start to fix it?
I've only had plasma tvs since flat screens came out. My first one was a Samsung EDTV (Enhanced Definition) on 480P cable and 720p on DVD. Now I have a Panasonic TC-P50ST60 which cnet gave it's highest ever rating to for a television. Plasma TVs are the superior format but everyone is going towards LCDs. Too bad but I hope that my television will last the rest of my life.
Just subscribed I like the video I do have a plasma TV ps51e490b1k Powers on okay with sound, inputs are good as can connect PlayStation and hear it but screen blank tried all the reset functions on TH-cam videos but nothing will fire up the screen can’t see the menu on the screen so have landed myself on your TH-cam page. I am suspecting the ysus board only because I can slightly hear a buzz coming from it done a quick few tests on the main board seems okay
Thanks for all the informative videos. It's great that you want to help others. Are plasmas really going the way of the Dodo ? I have one thats seven years old and it just lost the picture . I don't know if it's worth fixing or to buy an LCD. What's your opinion ? Anyways, keep up the good work. Thanks for your help.
patrick green the problem with plasma TVs is you can fix one and it may last another five years or one month. from my experience fixing LCD TVs you fix one and they tend to last way longer.
Hello Sir! very nice informative video! What if the 12V pin going towards the main board is not 12V but 11.8V? the TV is on. do you think the main board is at fault? I have 5V standby voltage both on and off state.
Hi currently working on a 50 inch plasma. Standby light on. Power up standby light blinks goes off for a few seconds comes back on. Logic board? green led will blink 3-4 times then goes out. 120vac into full wave bridge rectifier but only 79vdc output. Seems low to me as expected 150-180vdc but I have no schematic. Any thoughts? Thanks
High end plasmas had amazing picture. I seem to recall some states/jurisdictions were talking about banning them, because they suck power like crazy. So I think big screen TV makers kind of just said yeah okay, let's start moving towards LED/LCD type of big screens.... That's a good video. You can find these plasmas for nothing these days.... Can you still get parts?? Is shopjimmy supporting these at all???
Just found video. I have pn51d450a2d samsung TV. While TV is on after a while the power will turn off then on intermittently. Between 1st time off then on and 2nd time off then on is pretty spread apart. Later the TV will turn off were i need to unplug then plug back in to turn on TV. What do you think it could be? Thanks
Hey Tampatec. Yours are my favorite instructional tv repair videos. I have a question on plasmas though...I tried troubleshooting my 60inch lg plasma. It just clicked on and off, then on and off. When I took the back off, the board with the HDMI inputs had a red light that flashed whenever the clicks happened. Other videos suggest unplugging each board and cycle power to rule out the bad board. It clicked the same whether it was connected to one, some, all or none of the boards. I did my best to check voltages. No wonky caps. Seems like this is power board, yeah?
I watched your video on the checking of the volts on samsung 50" plasma tv. I have the exact same model you were checking. I dont have power coming out of my standby and I just replaced some capcitors that I thought were the issue. What would you suggest now?
Hey buddy love the videos keep up the good work!! have a quick question for you I have an LG 60-inch plasma that I have checked all the voltages on and everything checks out but after an hour or two of the TV being on it randomly shuts off turn it back on and the same thing it lasts maybe 15-20 minutes maybe an hour and then shuts off again any ideas on what this might be? Any ideas would be greatly appreciated
@@TampaTec that's what I was thinking but I wanted to hear it from you before I go on a capacitor treasure hunt!! Thanks for responding I'll let you know what I find.
@@TampaTec I have the same issue with my Samsung 50" plasma. I think it is the power supply board, but am looking at the board trying to figure out the output voltages and am having an issue determining the voltages I should be seeing on VA and VS. I think the standby voltage should be 5.3v and the on voltage should be 15v but not sure what pins to test. The part number of the board is bn44-00277a. Any help is appreciated.
thank you , this is wonderful but in fact i have a plasma its point 5 volts and 12 volts also va and vs as they are written on the back plate but no picture and it remain black it is LG42
I have a Samsung Plasma pn51f5300afxza and the power board is shot. I see on the power board there are 4 different verisons of the same board. (P51ff_DSM, P60QF_DSM, P51FN_DSM, P60QN_DSM) My verison is the P51FF_DSM. My question is can i replace the board with any of these verisons?
Hi, i have a LG plasma 60" that have all voltage ok, but some seconds after the powerup the Va jump from 55V to 64v them shutdown, do you now what is the problem ? whem i remove the Tcom form the main board the TV power up and i can hear the sound, but no image.
I'm troubleshooting a Pioneer 503cmx plasma. The set does a Power Down (protection ckt shutting down the PS) shortly after the relays click on . It will stay on if I disconnect X & Y sustain boards from the PS. Looking at PS, all the low voltage supplies are exactly where they should be. VSUS is 224V, but any test points marked "0V" on the PS board are reading -52V (to chassis gnd). No obvious signs of burnt parts and no bulged caps. Ideas on where to look first? Also, would this failure be confined to the PS or would it be likely that it damaged other boards/circuits as well? Thanks so much for any input you may offer!
i was given a plasma t.v. a couple of weeks ago wirks but trying to figure out why the color is messed up need to check but other than that works good a free 46" lg plasma t.v. can't complain
Gary Gushue not sure if plasma TV have them but could be the t-con board or could be a cable issue or could be lots of other things best let a technician look at it
Hello! First thank you for all your videos. I don’t know if you will read this but I will give it a try, I also noticed that the video is 2 years old but I’ll take my chances. A neighbor recently gave me a faulty 60-inch plasma TV, the exact model is PN60E5300AFXZA, when you plug the power cord the stand by red led comes on, and when trying to power on the tv it will blink a few times and nothing else happens, no sound, no nothing on the screen. I took the back cover off to check if I was able to find any visible indicator of a bad capacitor or any signs of a damaged component. Nothing visibly damaged. I tried troubleshooting it by unplugging the cable that goes from the power board to the X Board (Right side of the tv) and to my surprise when you try to power on the TV this time you hear the power on tune, a sound! but no image and the TV goes back to standby mode.Voltage in the PS-on is correct and also in the Standby pin. I just want to know which board would be the culprit in order to find a replacement… Can you give me any other ideas on what to test to pin point the faulty board? The Y board gets power from the X board, so I unplugged just the Y board and no sound no picture. When the X board is unplugged, power on sound, no picture, and goes back to standby. Do you have any advice on what should I test next in order to find the faulty board? Thank you very much in advance.
Possibly x or y sustain boards. Sounds like x but possibly both. Get tv boards at shopjimmy.com or electropartsonline.com use code tampatecfriend for discount.
Thank you for your message. And what would be the proper way to test the power board? Do I need to short the ps-on and 5v sb together? or just the ps-on to a ground pin? Thank you again.
Hello Tampatec I have a Vizio smart tv and it just went black. The blue pwer light will come on and then fade and go out the red standby in the back is on. I am not tech savvy but I am willing to try and give my tv back life. If you could give me some guidance to what I need to fix it. If you have a email so I can get more info to communicate that would be so appreciated thank you have a good one and thank you
Hi Tampatec, I have a LG plasma tv model 50pj350 with sound but no image. I checked the power board and it is working, changed damaged mosfets on YSUS, caps read ok, so do resistors and diodes. Though the VY and VSC testing points shoud read -198V and 135V and I have no more than 60 volts on each. Any sugestion? I’ve tried to get the board diagram with no success. Thanks.
hi bro, i have samsung 42inch plasma tv, i have chacked Vs &Va on main board, what was i found is the voltage Vs & Va continues decreasing there is not maintain when i turned on the tv. is that mean my power board is bad?need hear you feedback later.thanks
tampatec which diferences is between s42ax-yb08 and s42x-yb07,that is screen panel for samsung tv 42 inch with no viewed diferences on eye.can be replaced s42ax-yb08 with s42x-yb07 pls help me.
Hi! I have a samsung plasma tv PS64F8505ST (the last plasma of their high end tv models/ 2013 European model) I would apreciatie the help from you about my issue. Last year i replaced the Y-susboard due to no picture. This time my tv turns of about after 30-90 minutes. Everything just shuts of, even the led light. Cant turn on the tv with my remote even after i replugg the cord to the outlet. I thought the problem sat at the X-sus board. I tried switching to another x-sus board but the tv wont even turn on or show any picture. The power board starts to "clicking" instead so i unplugged the x-sus board from the powersupply and the "clicking" sound went away. When i switched back the old x-sus board it worked fine without any clicking sound from the powersupply but the tv starts to turn of again after 30-90 minutes. I had the powersupply get a light inspection (just looking after any visible faults) but the guy said that he didnt se any problem with the board. What do you reccomend me to do next? Best regards
I have a Panasonic Plasma TV with half a picture and the other half is white screen opened it up and only found two caps on power board that are a bit swollen ?
Hello, I have a Samsung TV model PN51D530A3F I ready replace two times of the Y main board but Blow up again, maybe do you have any idea? Thank you so much
Tampatec, Love your videos. I have a Vizio (LG) E552VL 55" LCD. Runs great for 5 minutes, then entire screen turns multi-colored pattern with loud ~800Hz tone. Changed power board and same problem. All components of 3655-0352-0150 IO board looks good, but is not available anywhere on internet. Any ideas what is wrong with the TV?
Tampatec I have a 55 inch Samsung smart tv 3D and I did a update on it and now it turn off after 5 second of being on to see if you have an Idea what could it be. thanks
Jose Rodriguez main board memory could have been corrupted by bad update. best way to update is usb but I would try to reset tv by unplugging power for 1 minute. then if that doesn't work call manufacture
Hey Paul, I have this exact same tv . When I got it, It would not turn on and had a fast flashing red stby. light on the front.. I replaced 4 bad caps on the power supply and it did turn on and stay on with no picture or sound so I ordered 2 buffer boards. 2 weeks later I installed the buffer boards and when I plugged it in the stby. light was solid, tried to turn it on and all it did was the relays clicking on and off 5 times and goes into shut down mode. Unplugged both the Y and X boards, same click pattern. I am showing 10 volts on the stby. and 25 volts on the 12volt pins, also 10 volts on the vs_on. Is that still indicative of a bad main board?
I have a 50" Samsung plasma tv. My picture went out but I still have sound. I replaced the y sustain and the y buffers but am still having the same issue can you help me out.
I have a Vizio P50 HDM plasma - When I press the remote power, the green power lite comes on. There is no image, but there is back lighting. The remote will not power off the TV. I have to unplug the power cord, before the TV will turn off. After plugging the TV back in this resolves the problem, The TV will power up correctly. Problem is intermittent, but becoming more frequent. Can you help ,please ?
my PS51F5500 gave loud pop sound, then totally OFF, red front led ON for few seconds then off , green light at the board blinking slowly. I am not sure which board is the isue.
When i power up the tv checking the 15v on the power board it climbs down without shutting the power off, the other voltages also drop before i power the unit off? how come, the capacitors visually all look good. when i power up the tv i get two blinks then nothing, although the standby works.
hope someone can help i am trying to replace the display in a 50in panasonic plasma i have the replacement display but was wondering the best way to separate the glass from the metal it is glued to please and thanks for any and all help
hello there! i've been following you for quite a while and i'm saying is that i like the way you explain things... very "on jobist"! I do some repairs for friends like an hobbist and at the moment i've an issue with a samsung plasma tv and i need your help, if you can, of course... It's a samsung ps42e7sx/xec with the stanby blinkink and don't starts. when you press the power button on the remote the tv receives the signal but still dont start. i got the standby voltage 5volts steady to the mainboard and to the logic board.... but... no other voltages appear....is dead... only get 0.75V in the place for the 12 volt return from the mainboard... can you get some light to me, please? the best greets from Portugal
Hey tampatac i got a guestion i bought myself a broken tv and a soon aus i chanched the fuses they popt out again (Hope that did mit damage any other Parts) do you have an idea what IT could be ? I checked the elkos and some diodes. Can i unplug all the other Parts from the powerboard just in case when i out in the Plug the next Time or does that not work?
Jim Watkins thx but i have anotger question how do i check a voltage Regulator? I saw a lot of Videos how to so IT with power in the Board but how am i supposed to do that when the fuse pops out the Second i Plug the tv in ?
Samsung plasma TV ps43f4900 vs voltage after 2 second in 0 volt check on load and unload board. Check mother boar output vs on terminal same problem . what is the problem other voltages is ok .
Hi man. I have a problem with my tv. When I connect the ps4 controller to the console to charge it up the touchpad goes crazy it press and swipe without even touching it. When I tried another tv it worked without any problem. I changed the hdmi and the power cable of my tv still the same problem. Can at least tell where do you think the problem is ?
I am trying to repair my LG plasma television. When I power it up I get a picture for a moment but the it goes out. The standby light is still on. Any ideas would be great, Thanks in advance.
Tampatec do you know a dennis bachalier?? He lives in my city of Cincinnati Ohio says he knows you I believe them he's a TV tech guy. You know him just wondering
Hi sir i need one help about plasma tv service. I am also technician i got a Panasonic 42" plasma tv for repair. This not working stby 5v and 12v is ok but 15v is absence please help me sir please thanks for advance.
Hi Tampatec I am having a real problem plasma tv it is a LG 42PT353K. Now the power supply is fine for voltage with no boards connected to it. When i connect the main board the standby voltage is low it should be 5v and it is 3.45v.When i connect the x board tv clicks on then clicks straight off, so i changed the x board and it`s the same problem. Now i need some help with the logic board. I have been told to check the main board i need to solder a wire to it to test if the tv comes on.Any help would be grate for this trouble shoot. Cheers man.
Hi Jim Dailey. I would just check no wires are not loose in side and out side of it ,and check the voltages are what they should be going around the board. But as i have never seen inside a projection TV it is hard to say. If it is using a bulb i would just take it out and reinsert it , if possible to do that. Good luck with it .
how do I tell if the y sustain board is working, have sound but no picture, checked the y board for grounds and found none. checked all fuses and can't find any bulging capacitors.
hi newbies who trybto learn fix rv by myself. ingot problem that my tv samsung. lcd. has blink screen every 2 second. when i open the tv. i saw 3 capacitor atvpower supply bad. after i cgange it . porblem.still not resolve. can u g uide me what should i check.
My Samsung plasma TV no picture only sound check vs it's okay check standby is fine check and say everything is fine still no picture buffer board okay
My plasma lasted for ten years, just died, opened, found a capacitor and fuse on power board both bad, replaced and then killed another fuse.. driving me crazy.
Paul,
Thanks for showing this information on plasma sets. I have a Samsung plasma 1080p TV. It's working, but someday I may well need to be able to check the voltages to try and troubleshoot what the problem is.
Tom
You are very informative, I am a technician also but I can't explain your experiences in electronics repair. Hope God give you more energy to continuous . thanks for your support
Nice, still own an old sony plasma screen. Very nice video.
your videos always interest me, it's nice to see an awesome channel you're vids are always helpful
Hi, like your videos....I would like to know how you adjust the Y- Sustain board voltage?
I find your videos very interesting. Thank you for sharing. It's hard to stay posative these days. Life is just a journey, ride it right and you get to go somewhere fantastic. That looks just like my TV. When I bought it they said that Plasma was the best. Sorry to hear they are fading out.
Good morning, my 50 inch plasma is failing to turn on yesterday. Red led is on and cycles off for a few seconds then goes back on when I use the remote. Tried another remote with same result. Going to open it up this afternoon and see what I find. This unit about 5 years old. Thanks for the tutorial!
I have an old 5080HD Kuro.I think I am going to tinker with that next.
Another helpful video.Thanks.
Congrats on 250,000 subs!!!
Tech With Brett cool thanks, I didn't know till I got this message on my phone. Your channel is looking really professional you'll be there too.
Tampatec Thanks! 1/4 of a million is amazing!
Tech With Brett that way you put it does sound impressive. not sure why people sub my channel it's kinda boring. 😪 I guess some people like to fix electronics.
Tech With Brett 328k subs
I repair plasma 43 inches but the VA and VS voltage drop down into 10 voltage sir. What is possible causes sir?
Please do more Plasma videos like Panasonic
Thanks so much for making this video.
Is there a reason you didn't adjust Va voltage? Also, do you know what acceptable tolerances are for the various voltages printed on the sticker on the panel? Va, Ve, VScan, etc? Is 5% of the printed value acceptable, or 10%? Thanks!
thanks for ur video my upper buffer burn a ic i got another 1 an was told to check my vs an va but did tell me how to check it i think ur video help me out will see soon. oh i have a hitachi p50h401
Great video of plasma tv. The problem I am having is the missing voltage on the x sub-board was wondering what is the voltage going typical coming out of the ribbon going 8nto the panel I at the ribbon its 25 volts i know this is not right. have the 190 going into the x board
I have a Samsung Plasma TV here that is clicking and double flashing the stand by light. Double flash/ Pause Double flash/ pause about five times. No visible signs on any of the boards, like say bulging capacitors or scorch marks, and I haven't yet tested points with my multi meter but from what I have seen so far it is the power board. It is a 2011 model PS43D490A1WXXU.
great tutorial thanks. I will check your other vids, but what if these all pass but the plasma turns off with recurring clicking, when warmed up?
The video was very informative, but it doesn't address the particular symptoms that we are experiencing with our Samsung 42" HPS 4253X/XAA. This Plasma TV has been installed on a TrippLite HT-1000UPS to eliminate power brown outs and surges and has given us very reliable service. The symptoms ONLY appear at start up in the morning. The entire screen is dimmed but the channel chosen is still visible but is grainy and the entire screen slightly pulsates for about 5 minutes and then the screen cleans up and then appears normal. I presume it to be a power supply related issue ? Possibly an electrolytic weakened with use ? The TV works great otherwise and I hate to discard it without trying a simple fix. Your feedback would be greatly appreciated. I'm a Ham Radio Operator since 1966 and have experience with soldering and circuit repair, but not much experience with flat screen repair ?
Hey great vid !
I have a Dell W4200HD Plasma that only turns on with the x-main unplugged, should I concentrate on the power supply or the x-main.
I forgot to say i don`t know how to wire the logic board for this test.
Thanks again man Good day.
Like a pc power supply are tvs upstream of the power supply DC or AC?
I've got a plasma tv that has pink/purple banding mostly over the white portion of tv picture. What do you think is causing it and where should I start to fix it?
I've only had plasma tvs since flat screens came out. My first one was a Samsung EDTV (Enhanced Definition) on 480P cable and 720p on DVD. Now I have a Panasonic TC-P50ST60 which cnet gave it's highest ever rating to for a television.
Plasma TVs are the superior format but everyone is going towards LCDs. Too bad but I hope that my television will last the rest of my life.
ok thanks for your response I really do appreciate that.
God bless you
Jose Rodriguez sure thing, with so much hate in the world this is the least I can do.
Just subscribed I like the video I do have a plasma TV ps51e490b1k Powers on okay with sound, inputs are good as can connect PlayStation and hear it but screen blank tried all the reset functions on TH-cam videos but nothing will fire up the screen can’t see the menu on the screen so have landed myself on your TH-cam page. I am suspecting the ysus board only because I can slightly hear a buzz coming from it done a quick few tests on the main board seems okay
Thanks for all the informative videos. It's great that you want to help others. Are plasmas really going the way of the Dodo ? I have one thats seven years old and it just lost the picture . I don't know if it's worth fixing or to buy an LCD. What's your opinion ?
Anyways, keep up the good work. Thanks for your help.
patrick green the problem with plasma TVs is you can fix one and it may last another five years or one month. from my experience fixing LCD TVs you fix one and they tend to last way longer.
Great video - not many people doing electronics repair. I'd like to see the same type of videos for computer monitors.
Shalmaneser I uploaded few videos on computer monitor repair. check my repair playlist at the end of the video.
Hello Sir! very nice informative video! What if the 12V pin going towards the main board is not 12V but 11.8V? the TV is on. do you think the main board is at fault? I have 5V standby voltage both on and off state.
Can you make voltage adjustments to deepen black levels and peak white levels?
Hi currently working on a 50 inch plasma. Standby light on. Power up standby light blinks goes off for a few seconds comes back on. Logic board? green led will blink 3-4 times then goes out. 120vac into full wave bridge rectifier but only 79vdc output. Seems low to me as expected 150-180vdc but I have no schematic. Any thoughts? Thanks
Thank you very much... It's really useful for me...
High end plasmas had amazing picture. I seem to recall some states/jurisdictions were talking about banning them, because they suck power like crazy. So I think big screen TV makers kind of just said yeah okay, let's start moving towards LED/LCD type of big screens....
That's a good video. You can find these plasmas for nothing these days.... Can you still get parts?? Is shopjimmy supporting these at all???
Just found video. I have pn51d450a2d samsung TV. While TV is on after a while the power will turn off then on intermittently. Between 1st time off then on and 2nd time off then on is pretty spread apart. Later the TV will turn off were i need to unplug then plug back in to turn on TV. What do you think it could be? Thanks
Hey Tampatec. Yours are my favorite instructional tv repair videos. I have a question on plasmas though...I tried troubleshooting my 60inch lg plasma. It just clicked on and off, then on and off. When I took the back off, the board with the HDMI inputs had a red light that flashed whenever the clicks happened.
Other videos suggest unplugging each board and cycle power to rule out the bad board. It clicked the same whether it was connected to one, some, all or none of the boards. I did my best to check voltages. No wonky caps. Seems like this is power board, yeah?
I watched your video on the checking of the volts on samsung 50" plasma tv. I have the exact same model you were checking. I dont have power coming out of my standby and I just replaced some capcitors that I thought were the issue. What would you suggest now?
Hey buddy love the videos keep up the good work!! have a quick question for you I have an LG 60-inch plasma that I have checked all the voltages on and everything checks out but after an hour or two of the TV being on it randomly shuts off turn it back on and the same thing it lasts maybe 15-20 minutes maybe an hour and then shuts off again any ideas on what this might be? Any ideas would be greatly appreciated
Sounds like bad capacitors in power board or main board from my experience.
@@TampaTec that's what I was thinking but I wanted to hear it from you before I go on a capacitor treasure hunt!! Thanks for responding I'll let you know what I find.
@@TampaTec I have the same issue with my Samsung 50" plasma. I think it is the power supply board, but am looking at the board trying to figure out the output voltages and am having an issue determining the voltages I should be seeing on VA and VS. I think the standby voltage should be 5.3v and the on voltage should be 15v but not sure what pins to test. The part number of the board is bn44-00277a. Any help is appreciated.
On my plasma tv im good readings on the va and the vs but low reading only 3 volts on the 5 volt does this mean ps board is bad
Hello
What is the Vg voltage and what it should be?
I am reading 14v, is that ok?
All voltages are ok but no picture.
Samsung plasma tv
thank you , this is wonderful but in fact i have a plasma its point 5 volts and 12 volts also va and vs as they are written on the back plate but no picture and it remain black it is LG42
hey I have Samsung plasma tv 50 inch . I have sound but no picture . in sticker vs 207v but I find 223v . u can help me plz how I can fix this voltage
I have a Samsung Plasma pn51f5300afxza and the power board is shot. I see on the power board there are 4 different verisons of the same board. (P51ff_DSM, P60QF_DSM, P51FN_DSM, P60QN_DSM) My verison is the P51FF_DSM. My question is can i replace the board with any of these verisons?
Hi, i have a LG plasma 60" that have all voltage ok, but some seconds after the powerup the Va jump from 55V to 64v them shutdown, do you now what is the problem ? whem i remove the Tcom form the main board the TV power up and i can hear the sound, but no image.
thanks for the information- I'm problem solving an LG plasma from 2006- can't stand to part with it as it has low hours on it.
I'm troubleshooting a Pioneer 503cmx plasma. The set does a Power Down (protection ckt shutting down the PS) shortly after the relays click on . It will stay on if I disconnect X & Y sustain boards from the PS. Looking at PS, all the low voltage supplies are exactly where they should be. VSUS is 224V, but any test points marked "0V" on the PS board are reading -52V (to chassis gnd). No obvious signs of burnt parts and no bulged caps.
Ideas on where to look first? Also, would this failure be confined to the PS or would it be likely that it damaged other boards/circuits as well? Thanks so much for any input you may offer!
AWESOME video.
i was given a plasma t.v. a couple of weeks ago wirks but trying to figure out why the color is messed up need to check but other than that works good a free 46" lg plasma t.v. can't complain
Gary Gushue not sure if plasma TV have them but could be the t-con board or could be a cable issue or could be lots of other things best let a technician look at it
Hello! First thank you for all your videos. I don’t know if you will read this but I will give it a try, I also noticed that the video is 2 years old but I’ll take my chances.
A neighbor recently gave me a faulty 60-inch plasma TV, the exact model is PN60E5300AFXZA, when you plug the power cord the stand by red led comes on, and when trying to power on the tv it will blink a few times and nothing else happens, no sound, no nothing on the screen.
I took the back cover off to check if I was able to find any visible indicator of a bad capacitor or any signs of a damaged component. Nothing visibly damaged. I tried troubleshooting it by unplugging the cable that goes from the power board to the X Board (Right side of the tv) and to my surprise when you try to power on the TV this time you hear the power on tune, a sound! but no image and the TV goes back to standby mode.Voltage in the PS-on is correct and also in the Standby pin. I just want to know which board would be the culprit in order to find a replacement… Can you give me any other ideas on what to test to pin point the faulty board? The Y board gets power from the X board, so I unplugged just the Y board and no sound no picture. When the X board is unplugged, power on sound, no picture, and goes back to standby. Do you have any advice on what should I test next in order to find the faulty board? Thank you very much in advance.
Possibly x or y sustain boards. Sounds like x but possibly both. Get tv boards at shopjimmy.com or electropartsonline.com use code tampatecfriend for discount.
Thank you for your message. And what would be the proper way to test the power board? Do I need to short the ps-on and 5v sb together? or just the ps-on to a ground pin? Thank you again.
Hello Tampatec I have a Vizio smart tv and it just went black. The blue pwer light will come on and then fade and go out the red standby in the back is on. I am not tech savvy but I am willing to try and give my tv back life. If you could give me some guidance to what I need to fix it. If you have a email so I can get more info to communicate that would be so appreciated thank you have a good one and thank you
Hi Tampatec, I have a LG plasma tv model 50pj350 with sound but no image. I checked the power board and it is working, changed damaged mosfets on YSUS, caps read ok, so do resistors and diodes. Though the VY and VSC testing points shoud read -198V and 135V and I have no more than 60 volts on each. Any sugestion? I’ve tried to get the board diagram with no success. Thanks.
hi bro, i have samsung 42inch plasma tv, i have chacked Vs &Va on main board, what was i found is the voltage Vs & Va continues decreasing there is not maintain when i turned on the tv. is that mean my power board is bad?need hear you feedback later.thanks
tampatec which diferences is between s42ax-yb08 and s42x-yb07,that is screen panel for samsung tv 42 inch with no viewed diferences on eye.can be replaced s42ax-yb08 with s42x-yb07 pls help me.
I have i hisense 50h5g tv the stand by volt is 3.5 is that ok?
Hi mate iam following your video and my voltage is fluctuating on pds5v can I help
Hi!
I have a samsung plasma tv PS64F8505ST (the last plasma of their high end tv models/ 2013 European model)
I would apreciatie the help from you about my issue. Last year i replaced the Y-susboard due to no picture. This time my tv turns of about after 30-90 minutes. Everything just shuts of, even the led light. Cant turn on the tv with my remote even after i replugg the cord to the outlet. I thought the problem sat at the X-sus board.
I tried switching to another x-sus board but the tv wont even turn on or show any picture. The power board starts to "clicking" instead so i unplugged the x-sus board from the powersupply and the "clicking" sound went away. When i switched back the old x-sus board it worked fine without any clicking sound from the powersupply but the tv starts to turn of again after 30-90 minutes. I had the powersupply get a light inspection (just looking after any visible faults) but the guy said that he didnt se any problem with the board. What do you reccomend me to do next?
Best regards
Very helpful thanks.....
I have a Panasonic Plasma TV with half a picture and the other half is white screen opened it up and only found two caps on power board that are a bit swollen ?
Hello, I have a Samsung TV model PN51D530A3F I ready replace two times of the Y main board but Blow up again, maybe do you have any idea? Thank you so much
Tampatec, Love your videos. I have a Vizio (LG) E552VL 55" LCD. Runs great for 5 minutes, then entire screen turns multi-colored pattern with loud ~800Hz tone. Changed power board and same problem. All components of 3655-0352-0150 IO board looks good, but is not available anywhere on internet. Any ideas what is wrong with the TV?
Just wanted to pick your brain, have a similar tv, it will power on then shut off then power on again. Any thoughts what that may be?
if you're in tampa, can you fix my tv? do you have a shop? Its a 55 inch lg 3d led. screen goes blank in 2 seconds.
Can you help me sir VA and VS voltage drop into 10 volts . What are possible causes?
Dude you rock!
By the way great videos.
Tampatec I have a 55 inch Samsung smart tv 3D and I did a update on it and now it turn off after 5 second of being on to see if you have an Idea what could it be.
thanks
Jose Rodriguez main board memory could have been corrupted by bad update. best way to update is usb but I would try to reset tv by unplugging power for 1 minute. then if that doesn't work call manufacture
Hey Paul, I have this exact same tv .
When I got it, It would not turn on and had a fast flashing red stby. light on the front..
I replaced 4 bad caps on the power supply and it did turn on and stay on with no picture or sound so I ordered 2 buffer boards.
2 weeks later I installed the buffer boards and when I plugged it in the stby. light was solid, tried to turn it on and all it did was the relays clicking on and off 5 times and goes into shut down mode.
Unplugged both the Y and X boards, same click pattern.
I am showing 10 volts on the stby. and 25 volts on the 12volt pins, also 10 volts on the vs_on.
Is that still indicative of a bad main board?
I have a 50" Samsung plasma tv. My picture went out but I still have sound. I replaced the y sustain and the y buffers but am still having the same issue can you help me out.
Can l help me sir? I have repair samsum plasma 50 inch no power. What can i do.
hey tampatec I have VS but no VA what's the problem
Hi ,,, Sir connecting the power supply seperately , after switch on all voltages drop!! Y 🙏
I got a n lg plasma tv model pn5700 no video but has sound.. need to check these voltages..
I have a Vizio P50 HDM plasma - When I press the remote power, the green power lite comes on. There is no image, but there is back lighting.
The remote will not power off the TV. I have to unplug the power cord, before the TV will turn off. After plugging the TV back in this resolves the problem,
The TV will power up correctly. Problem is intermittent, but becoming more frequent. Can you help ,please ?
my PS51F5500 gave loud pop sound, then totally OFF, red front led ON for few seconds then off , green light at the board blinking slowly.
I am not sure which board is the isue.
Hi Buddy need help for fixing Plasma Tv LG 42PN4500 .........Problem with plasma is that its not switching ON
When i power up the tv checking the 15v on the power board it climbs down without shutting the power off, the other voltages also drop before i power the unit off? how come, the capacitors visually all look good. when i power up the tv i get two blinks then nothing, although the standby works.
hope someone can help i am trying to replace the display in a 50in panasonic plasma i have the replacement display but was wondering the best way to separate the glass from the metal it is glued to please and thanks for any and all help
Tht is very useful
hello there!
i've been following you for quite a while and i'm saying is that i like the way you explain things... very "on jobist"!
I do some repairs for friends like an hobbist and at the moment i've an issue with a samsung plasma tv and i need your help, if you can, of course...
It's a samsung ps42e7sx/xec with the stanby blinkink and don't starts.
when you press the power button on the remote the tv receives the signal but still dont start.
i got the standby voltage 5volts steady to the mainboard and to the logic board.... but...
no other voltages appear....is dead... only get 0.75V in the place for the 12 volt return from the mainboard...
can you get some light to me, please?
the best greets from Portugal
Hey tampatac i got a guestion i bought myself a broken tv and a soon aus i chanched the fuses they popt out again (Hope that did mit damage any other Parts) do you have an idea what IT could be ? I checked the elkos and some diodes. Can i unplug all the other Parts from the powerboard just in case when i out in the Plug the next Time or does that not work?
ACDC508 probably voltage regulator or a bad capacitor
Jim Watkins thx i treibst to check that
*try
No prob. good luck
Jim Watkins thx but i have anotger question how do i check a voltage Regulator? I saw a lot of Videos how to so IT with power in the Board but how am i supposed to do that when the fuse pops out the Second i Plug the tv in ?
Samsung plasma TV ps43f4900 vs voltage after 2 second in 0 volt check on load and unload board. Check mother boar output vs on terminal same problem . what is the problem other voltages is ok .
Hi man. I have a problem with my tv. When I connect the ps4 controller to the console to charge it up the touchpad goes crazy it press and swipe without even touching it. When I tried another tv it worked without any problem. I changed the hdmi and the power cable of my tv still the same problem. Can at least tell where do you think the problem is ?
Samsung 42inches plasma TV has fault, the power supply 5volt but no standby light is coming on, what can be the fault?
I am trying to repair my LG plasma television. When I power it up I get a picture for a moment but the it goes out. The standby light is still on. Any ideas would be great, Thanks in advance.
my plasma has green lines , is it cheap to fix that problem ? thanks
123Volt123 JmanElec can be bad control board or bad panel
Tampatec do you know a dennis bachalier?? He lives in my city of Cincinnati Ohio says he knows you I believe them he's a TV tech guy. You know him just wondering
Hi sir i need one help about plasma tv service. I am also technician i got a Panasonic 42" plasma tv for repair. This not working stby 5v and 12v is ok but 15v is absence please help me sir please thanks for advance.
I have a Samsung ps43E450A1R sounds comes then goes off,what could be a problem?
Hi Tampatec
I am having a real problem plasma tv it is a LG 42PT353K. Now the power supply is fine for voltage with no boards connected to it. When i connect the main board the standby voltage is low it should be 5v and it is 3.45v.When i connect the x board tv clicks on then clicks straight off, so i changed the x board and it`s the same problem. Now i need some help with the logic board. I have been told to check the main board i need to solder a wire to it to test if the tv comes on.Any help would be grate for this trouble shoot.
Cheers man.
Jim Dailey I have a Sony 65 inch projection tv which keeps blink ing the picture on and off. What's wrong with it? Thank You.
Hi Jim Dailey. I would just check no wires are not loose in side and out side of it ,and check the voltages are what they should be going around the board. But as i have never seen inside a projection TV it is hard to say. If it is using a bulb i would just take it out and reinsert it , if possible to do that.
Good luck with it .
what happen if vs voltage is gradually down from 200v to 0 volt and va from58 volt to 0 ? i have a samsung 43 inch plasma tv. plz reply
prabhakar kumar thank
how do I tell if the y sustain board is working, have sound but no picture, checked the y board for grounds and found none. checked all fuses and can't find any bulging capacitors.
what common parts damaged if no vs @ va voltage?
hi newbies who trybto learn fix rv by myself. ingot problem that my tv samsung. lcd. has blink screen every 2 second. when i open the tv. i saw 3 capacitor atvpower supply bad. after i cgange it . porblem.still not resolve. can u g uide me what should i check.
hi sir good day TV PLASMA MODEL; PS43D50A2 black horizontal line on top, please help me tnx
Sir lg palsma 60", tv no picher hav a sunde,
My Samsung plasma TV no picture only sound check vs it's okay check standby is fine check and say everything is fine still no picture buffer board okay
My plasma lasted for ten years, just died, opened, found a capacitor and fuse on power board both bad, replaced and then killed another fuse.. driving me crazy.
Hey I have 55 TV Sony pictures has green lines and blurry images
Not complete ...im waiting for the y sustain board voltages reading... Like
My tv click sound hear tv on and off suddenly 5v is not stable what prbm
You forgot to mention how to check Vsc and Ve
I'm not getting VA volts
TV on - less than 1v on any connection I test (shrug)
Use less bcz u dont explain y board volts how to chek