FoxAlien Masuter Pro CNC Machine Assembly & First Run
ฝัง
- เผยแพร่เมื่อ 19 ก.ค. 2022
- Find out more or purchase the FoxAlien Masuter Pro here (AFF):
bit.ly/3PvMwZV
Love the channel? Consider supporting me on Patreon:
www.patreon.com/user?u=806627
Love the stream? Consider supporting (Stream Tips):
streamelements.com/modbotarmy...
Get Great Filament From PolyMaker & Help Support The Channel:
bit.ly/3P5MRD7
Join the official ModBotArmy discord server: / discord
In this video we will be unboxing and assembling the FoxAlien Masuter Pro CNC machine. Now that I finally have a garage I am very excited to get this built and use it for some small projects. The machine is made of all aluminum frame and comes with a mount to upgrade the spindle for a true router. Although this will be primarily used for woods and acrylics, I am hoping to do some aluminum on it as well.
Follow Me On Other Platforms To Stay Up To Date:
TH-cam (Main Channel):
/ @modbotarmy
Twitter:
/ dopesoner930
Instagram:
modbotarmy...
TikTok:
www.tiktok.com/@modbotarmy?la...
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Streaming Gear:
2 x C920 Webcams (Top & Side Cam):
amzn.to/3b8nxKd
Panasonic G7 (Face Cam):
amzn.to/3jvWM72
Sony A6400 (Mobile Cam):
amzn.to/3CcwspE
El Gato 4k Cam Link:
amzn.to/3b56LeV
Secondary Capture Card:
amzn.to/3b7o4My
El Gato Stream Deck:
amzn.to/3pxS9xe
Rode Wireless Go Mic:
amzn.to/3npkwux
Monitor Mounts:
amzn.to/3EeONmT
Camera Mounts:
amzn.to/3ba5pPS
Light Panels:
amzn.to/3E1FAhA
Great live stream!!!!! Thanks for sharing!
I'm about to get that same one. What laser would you recommend adding?
Do you have a video on how you got klipper screen to work on the windows tablet. I Have a Lenovo X1i was setting up to control my printers but havent been able to get klipperscreen to work on it.
Does this come with a roller for engraving like the X1 tool?
ok question, hows those little roller belts holding up?
Sorry, I don't understand English, so I ask you to give me a general conclusion of what you thought of Masuter Pro after using it for a month? Does she carve the materials well? And does Spindle do the job? I have the impression that the stepper motors are a little weak! I could be wrong! Thanks
Can i make it bigger x and y ?
Is ex4040 good or mauster pro ?
any chance you know how to set this up on a Mac?
Hi Daniel. My Masuter Pro arrived yesterday & I followed pretty much everything you did. However, when engraving, it cut's too deep. So after setting the Z axis with the probe, I have to manually raise it by 1mm. I have supports on the bottom of the mdf board, I also have a sacrificial spoil board on the top with blue tape & CA glue which has been fully flattened to within 0.2mm. So to the question, why do I have to raise the Z axis by 1mm when engraving? It's so annoying & if I forget, then the piece is ruined. Any help you or the other subscribers can assist with, I would be grateful.
Did you confirm the thickness of the probe is correct? As part of the setup you want to use calipers to measure the exact thickness of the probe and enter it into the cam software. That would be the first thing I would check.
@@ModBotArmyy Thank you. I will test that as soon as the calipers arrive from Amazon.
My spindle is loose, slides up and down no matter how tight I make it, any suggestions?
I had to really clamp down on mine for the same reason. If you try that and still no luck I would contact them.
Great vid!! For some good tips and help with CNC work look for James Dean Designs on TH-cam He is fairly good and have learnt a lot about CNC from him.....
I'm not expert so I would like to know if this Masuter Pro is better than the Genmitsu Prover XL
Worst customer support, don't buy any Foxalien you will regret it
Horrible sound!
Got bored of the first 15 minutes clearly don't know what you doing, James deans video on TH-cam is for better
Thanks for watching 😊