Amazing engineering. This is the perfect motor setup. Just add a Diesel generator for hot water and emergency electricity so that you have unlimited range. I would always want an electric motor drive my sail boat. All clean, all quiet, all reliable.
@@sailingokasolo6801 Heart attack pictures, fatty foods is animaIs cIogged arteries : th-cam.com/video/15wgYsToORM/w-d-xo.html !!! th-cam.com/video/pFPFnhfuLrE/w-d-xo.html Vegans don’t have this problem because that is the animals. Vegans don’t get clogged arteries, 4% cancer if you’re vegan. Meat based diet 51% death rate. That is extremely high for a frigging burger etc. Gorillas in the wild, have 1 percent cancer. And they never ever eat animals !!! Peer review science !!!! TH-cam delicious vegan food. Time to change ✅❤️😉
@@sailingokasolo6801 , . ‘Smells bad’. 6 hours !!!! 🔴🦌. 5 days or more sitting inside your stomach puuuu-trifying !!! No fibre if you eat animals in their secretions !!! Timelapse. th-cam.com/video/lmSrUvgWiqE/w-d-xo.html . You’ve got to watch this 😲🤮 !!!! We’ve got long, long stomachs. Flat teeth. Little flat teeth 🦷😬. We are herbivores ✅❤️. Peer review science. Fat is a heart attack. 🧟♂️🦠🍖🍳🍗🍔... 🔴🐮🐷🐔🐣🐙🐟..... Deodorant mask the symptoms. But 🧟♂️👟🧦🤮. That’s why I’m vegan ✅❤️💪😬🦷😉. Fibre is plants and fruit and nuts and berries and tubers and lentils and beans and potatoes et cetera. Next day poop without any stink.
yeah, every sailboat needs a different system in a way .... each hull is a different load, so there is a lot of research to do also, before the parts even ship. so there will never be enough sail drive conversion videos.....but the fist thing anyone needs to know when they do a sail drive conversion is : Make Sure You Get A Re-Gen Controller !!!
You are a real Jill of all trades; I can't wait to see how the motor performs and how far you get on a charge. With your ability to sail on and off the docks I think the motor will serve you well.
Im currently putting thru the ultimate test a 400nm northbound journey via the tidal rapids of the inside passage of vancouver island! more videos to come
Congratulations on your upgrade. We are an electric-drive Bristol 35, currently cruising in the Bahamas. We are like a sailboat without an engine, sailing everywhere with a range of about 30 miles on 200 amp/hrs of AGM batteries at 48 volt. It will be interesting to see what you get with Lithium.
30 miles on 200ah thats surprisingly good what speed is that at and how much draw? I haven't pushed it to the limit yet but im averaging 10-13mile range at 2.5knots which isn't great but its auxiliary propulsion!
Thank you for posting your experience, and issues, with the electric motor. I am currently looking at repowering with electric. I am looking at the 18kw liquid cooled from Thunderstruck Motors. I also found some interesting reading on lithium batteries and making custom cells for cheaper than assembled (Rigging Doctor has a whole video on DIY lithium). Would love to hear about your experience with the Lynac Lithium.
Llevo más de 20 años navegando solo por los océanos. Al ver tu canal me doy cuenta que somos más uno con el maldito virus de la navegación en solitario y vivir a bordo de nuestros viejos y amados veleros... Mi próximo trabajo será motor eléctrico sin duda. Buen viento amiga!
@@sailingokasolo6801 Bon voyage … nothing like visiting with family in the spring sunshine! Recent warm spell melted most of the snow but you could still visit a cabane a sucre! PS: I have breakfast every Sunday in Pointe-Claire with some sailing friends. So drop me a line when you’re in town in case you might like being the celebrity sailor at one of our Sunday skippers breakfasts!
@@sailingokasolo6801 OK … well if you do fancy a complimentary breakfast in the company of some interesting sailors here in Montreal … post a comment here or on one of my TH-cam videos and we’ll coordinate from there! In any event, enjoy your time with family. ⛵️😀
Super boulot Pat, quand je remplace le parc de batteries sur la voiturette électrique de mon père c'est un vrai casse-tête tous les 3 ans, mais avec de la patience, et de la méthode ça finit toujours par redémarrer 🙂
I love that box you built to house it, I just used the reducer from the company I bought the kit from but yours seems bulletproof. I got a 96v 18kw motor to push my 36,000lb 40ft boat. I used my old shift cables to control the motor but its literally connected with whipping twine and I need to redesign it...shrug, more content to share I guess. Nice boat, ill check out your other videos and subscribe.
@@sailingokasolo6801 I charge the system two ways. I have eight 100watt solar panels in series mounted to my railings running through a 96v mppt charge controller( 4 solar panels on each side). I also have a 96v ac charge controller I bought off line. I use the ac charger to charge at the dock and/or I use my portable generator to charge the batteries at anchor and I can use the generator to give me a long range at slow speeds (turning the boat into a hybrid). I find that getting the chargers were a giant P.I.T.A and regret not just going with a 48v system. But on the bright side I have ample thrust.
very cool. i have a 35' Pearson and am looking to install this ME1616 at 48v as well...didnt realize that was the equivalent of 60 hp. i was considering a 2:1 gear reduction...Thanks for sharing!
750 watts is essentially 1hp, most diesel drives at non peak efficiency can be 1/2 of their peak, pushing close to hull speed just isn’t practical in electric. Most use the electric drive at 1/4 output to get range. A 3hp belt drive runs my 31’ waterline x 11’ beam over 3 knots in calm conditions.
Looks like you have an Australian blue healer, they’re wonderful cattle dogs very smart,had a good red one for 16 years, broke my heart when he died, still think of him, I love your boating show by the way, Love from Australia.
@@Lana_Warwick hi I adopted winter as a pup from a cattle farm in the town of Quesnel as she was not a good prospect as a herding dog ( she is skittish) she has been my best friend for the last 5 years!
Great self build. Your channel just popped up. Welcome from down the coast in the Pacific Northwest from SV Touchstone. Relaunched and rebuilding as a parallel hybrid.
@@sailingokasolo6801 Sure, some on my Instagram, nothing to TH-cam yet. Financial limitations, time and experiments. Presently a 12v 'continuous' maybe duty winch motor no speed control, on V belt sheave. It was enough to launch and leave port. After purchase I found it was not practical to use for regeneration. I hope to later get a much better electric drive and batteries. Not expecting to have a large unit, found a Beta 16 so reasonable, I can't regret. Tired of deck generators personally. Many old sailors just ran alternators off the driveshaft for regeneration, so I can just do that. 3k watts drive and 1k regeneration I would be happy. Near Port Townsend presently, moving to Humboldt asap.
Thats how it goes I my conversion Basically took a year because of doing it on a paycheck to paycheck budget while working 50h+ a week on tug boats. Im seeing some interesting bike hub motors used on 20-32ft boats and i find that quite interesting and an easy option but the ones I saw were direct drive. I find it interesting that the only boats Ive seen set up with the pulley for an alternator were 60s 70s boats wondering why no so common these days.
@@sailingokasolo6801 Grin is one with a personal test boat with hub motor. Very few references of v belt on shaft to alternator, at least on the internet. Fair amount of suggestion of negatives like off axis wear by belt tension(most from people that never attempted it). Simply mount alternator/generator above driveshaft and pick up weight of shaft or 2x, it should not wear more than an unsupported shaft. Most smaller sailboats prop size can make it unsuccessful. I was able to get 18.75" double belt sheave between my wooden boat frames. Some 8" was still successful. Recommend the largest that there is room to fit. Bearing bolted to a frame just in front of a PSS shaft seal takes thrust and side load. Everything low tech off the shelf engineering. Something to be said for not waiting in port for a missing diesel part to be shipped in. Same reason for the Kubota based motor. I will have the rebuild set on board before world cruising, easy in frame rebuild to me.
Nice work! If I would have my own sailboat I definitely would go for electrical ASAP (doing everything myself like you did). Could you tell me how much you paid for everything? (Solar panels, engine, batteries, controllers etc...). Again, thanks for the video
Oh, I have thought about this so many times. We currently just spent a chunk on keeping our 50 year old ford dagenheim diesel running. We’re 45 foot full keel. Subscribing!
I really look forward to hearing what your range and running speed are like! When it comes time to replace my old diesel, I'll certainly be looking at going electric.
I watched a sailor who was a electrical engineer who converted his island packet 27 into electric.. he said to mount the controller or whatever the piece is that has the aluminum fins so that the fins are facing towards the open and make sure said fins are running vertical in order to displace the heat faster?? You can find his video on TH-cam.. said he was the first island packet owner to make the conversion and he made his own battery bank. I would buy a bank like you have because you're paying to have a warranty
awesome, thanks for sharing this. I am just dissecting my failed Volvo Penta and if its a total loss I may go electric too. I already converted to 400 Ah Lithium last year and have 400 W of solar but would sure need more battery and solar and I'm a small boat so not sure where to put more panels. But great job you did, very motivating.
Your heat sink is up side down the fins should run up and down so heat can escape not sideways.. it could over heat your control box .. ... happy sailing hope this helps..
Hey, just found your channel. I like the work you have done.,May I offer some advice , it's not a criticism just a safety concern, you leave a lot of metal fillings in the engine bay, I am sure you've cleaned them up bty now, however you have to be carefully of things like that when working with electrical stuff. Try to put down a tarp or something to catch them when drilling, triming, etc. Got to keep that area clean and safe for you.
I didn't do any drilling in the engine room the only filling i seen upon rewatching the video were simply on my cabin floor not the engine bay, I agree tho that foreign metal shavings do not belong near electrical connection
Your conversion installation is fairly clean and tidy. Do you have an engineering or fabrication background? For short periods, does the conversion provide similar power to the diesel (for overcoming a wind or strong current for example)? I may have missed this, but do you need to change to a different propeller for the different torque curve of an electric motor?
Thanks! No fabricating background what so ever but love to learn new skills! So the old diesel was 50hp so 16hp is in no way comparable but I am currently navigating johnstone strait some of the fastest tidal rapids in the world altho i need to wait for favorable tide and winds other wise I can hop about 13miles a day motoring only. I still have the same prop and shaft as i did with the perkins but you can adjust the belt reduction ratio and motor rpms to match the prop
A cheaper car engine would be more economic and give you better range . I sail the same boat with a perkins diesel 72hp Thirsty at full revs economic at half throttle, thanks for sharing best of luck well done young lady
The cost of marinisation of the car engine would probably cost as much as my motor did, but I hear you. 1500nm+ later I do not miss my old perkins diesel, its not for everyone but i knew what i was signing up for. You have an endurance as well?
@@sailingokasolo6801 yeah mine is an Endurance 40 cutter rigged nice and steady build by windboats in Norfolk UK. Lovely boat off shore , but a challenge in a marina . I love the living space , she's surprisingly fast with a bit of breeze. Where do you sail out of , I'm in crosshaven cork Ireland. Have a lovely day cheers
@@johnmeldrum4717 I am transient on the west coast of British Columbia Canada. I would love to have that extra 5ft! 35ft is fine solo but I find it cramped the second i have crew onboard, altho my lenght overall is 48ft with the solar arch
@@sailingokasolo6801 your along way away from here,,, I won't pop over for a coffee and a chat anytime soon, your an impressive young lady , well done with the boat modifications , wishing you fair winds, peace love and joy, Cheers John
Hello, I love your boat and what you're doing with it. I'm sorry if you answered all these questions in your videos but I'd love to know more detailed specs, such as your boat type, length, weight and roughly what current draw is at different speeds. I have a Cheoy Lee midshipman 40 (20,000lb 3/4 shoal keel) and I already have a 57.6v 300ah lifepo4 battery pack (~17kw) I made from 18 cells for my house and the same multiplus-ii as you and my next move is electric motor when mine is ready to go.
Hello No problem don't mind answering questions its why im sharing my conversion. The boat is an endurance35 ketch 22000lbs or about 12 tons full keel altho some may call it a long keel or 3/4 keel My current battery bank is 330ah 52v lifepo4, i added a recycled diy bank since the video ( 10y old winston 260ah cells) which in perfect flat calm conditions will allow for 12h at 3knots drawing 1000w but thats never allowing the battery to discharge below 48v. the motor is an me1616 you can find the link in description and am satisfied with its performance and they are very modular ca be used with different controllers at different voltages and has been reliable altho i would recommend a different supplier than the link in description thunderstruck electric motor carries a very similar kit and has a better customer service.
@sailingokasolo6801 thank you! I have 300ah Winston cells, about 7 years old but only used for 18 months and then sitting for 5 years. I bought 20 thinking I'd do a 4s and 16s pack but realized I don't need the 12v 4s and with the multiplus-ii you can get a max charge of 64v and max input of 66v so I went 18s. Have you done a capacity test on your diy pack? What did you spend on them? I'm still setting things up so I havent with mine but for 120$/cell I can't complain if it's a bit diminished.
Ive noticed so many expect me to have a 12v bank but I just have a 20a 48v to 12v converter running the house I paid $1000 CAD bought them from a friend
@sailingokasolo6801 I'm sure many people would love to see an update video on the system! I know I would love to see the specifics of how you did the two different banks and what you did for bms. Right now I'm working on integrating my 200a jbd bms and victron electronics with a raspberry pi running victron's Venus os. I want to figure out how to integrate a 1000a shunt and relay into my bms/victron environment if I go electric.
Wow! Inspiring! I've been in the thinking about this phase for awhile. About to fix up the old diesel while I dream about making this change when I've got the money. What's the length and displacement of your boat? What was the HP of the engine you replaced? Congrats and great video!
So I went with an "underpowered" option as i use the motor very much as auxiliary propulsion. Motor is 12kw or 16hp, boat is 27ft at water line but 36ft on deck 42 loa 22000lbs displacement fullkeel she is an endurance 35
@@sailingokasolo6801 wow that's a heavy 36' boat! Mine is 41 but 19000. I guess the full keel adds a lot. How have you found that level of power pushing against a current?
Its more a question of battery capacity, Im currently navigating johnstone strait ( in one of my previous videos go through seymour narrows at 15knots speed) and I have not needed to go full throttle once although im not going against the current, but had to dock in heavy current (4-5knots) twice with winds, I didn't feel underpowered while docking... but if i would have to go against a strong current for awhile then I may get into trouble can use the portable honda generator to extend my range. its all about good planning but it can be done even with this short range
Awesome on the repower!! We are going electric too. Stuck on anchor with dead gas engine. Have all the components for the electric conversion EXCEPT the pulleys and belt. I am trying to source pulleys like you have -- for 7/8 (~22mm) shaft. hard to find a supplier in the US. Please help. Thanks so much for the inspiration!!!
I got my pulleys and cog belt from electric Motorsport my motor supplier but maybe worth contacting Thunderstruck for parts as i think they are slightly cheaper
@@sailingokasolo6801 Well I’m familiar with Lynac (sp) batteries but would like to know what kind of bms you are using, low temp cutoff, battery monitor system etc. I’m very interested in your choice of motor, brand, model number, where you bought it etc. Same with your solar panels. Of course I’m interested in the cost. I sail my Bayfield 32c in the same corner of the world you do and when the time comes I’d like to go electric too.
The batteries were built for my specific use not sure about the bms and low temperature shut off as even in canada the bilge always stays over freezing temperatures you can find a link to the motor supplier with specs in the description and same for the solar in the description
@@sailingokasolo6801 First video of yours I have seen, possibly you have aperture clearance for a larger and more aggressive pitch, 3-4 blade? I hear less than 18” maybe insufficient. I was able to fit a 22” time will tell what I can get.
I don’t think those batteries can supply the current that motor will demand for more than 1/2 hour max on full charge and with the 2 solar panel you have will need 3 fully sunny days to recharge in te middle of summer . A week in the winter months. All that to go 3 miles. 10,000 would have gone a long way on a full rebuild and then sum. Regards hope it all works out?
Well as I am in snowy canada Im running hybrid with a 2kw honda generator. Everyone has different needs and capabilities, since in completed the instal in december I have traveled 250miles north and still have a bit over 100miles to go before reaching my new job the 150and battery bank is temporary until I can afford more. My range is about 10 miles at 2.5knots but that means careful planning
@@sailingokasolo6801 @Rigging Doctor they run a similar hybrid (Honda) most motoring they ever ran was ICW an inland Eastern coastal waterway. They keep power output low other than to get expediently through a bridge way forcing the generator to be used.
This is very interesting. Im real curious how it works out in the long run being up here in the PNW. For me down in the puget sound it seems if i actually want to get anywhere i have to spend the day using my motor. The damn winds up here are either on your nose or on the stern 95 percent of the time. I think about when i go to the san juans and having to motor for 80 miles. Same way thing up in the fjords in canada, lots of motoring. It'll be really interesting to see how this motor will work out up here. oh and very nice by the way.
Well i just finished transiting johnstone strait (literally just arrived in port mcneil) my battery bank is very small and I plan on doubling the bank the second I get back to work as I only have 10mile range at 2.5know so Im basically almost engineless atm... but I make it work as im now only about 120miles away from my job and finally managed to get the motor working in December while in the gulf island so I since december i had to dogdge many storms and less favorable weather, qe had lots of snow this year but Ive now made it 250miles since the conversion was finished
@@sailingokasolo6801 Thats very cool!! Im looking forward to seeing future videos with your bigger battery bank. Will you be able to get more speed with the motor setup you have? would be nice to get up to 5 knots and do that 10 miles in 2 hours.
I wonder if it's possible within realistic terms to make the system throttle by wire aka wireless much like Harley and other motorcycles have converted to..
J'ai hate de voir la prochaine vidéo, j'aimerai aussi passer à l'éléctrique. En attendant c'est à la voile que je bouge de mouillage en mouillage et utilise au minimum mon moteur. Ca tombe c'est fait pour ca...
@@sailingokasolo6801 Il faut savoir qu'une bonne partie de ceux qui voyage en voliers, font du moteur et non de la voile. Donc pour eux l'éléctrique est impensable. Ou ceux qui allume le moteur quand ils sont à moins de 4 nds. Je trouve ca aberants.
@@sailingokasolo6801 I chose 16hp diesel Beta over-propped so it will not develop peak hp, instead running at peak torque on the prop I chose for regeneration ability on electric drive. Some would say all wrong, sailing vessel first to me. I am not interested in power levels required to near hull speed. The largest antiquated diesel previously fitted was 22hp.
The transmission system is 3:1 cog belt and pulleys and then the mount is my design as the shaft is lower than the engine mount the ones on the market were not ideal
Hey that would be an ideal type of boat to convert, mine is an endurance35 and 12tons quite heavy for her size you can find a link to the motor kit in the description with price but I haven't quite "finished" yet as after 400miles ive decided to add more electronics and various devices to make it more user friendly so far im at $15000cad including charging system and batteries. More to come in next video
@@sailingokasolo6801 thanks will do I subscribed so I will be watching. I have a channel as well but I’m in Rochester so I’m researching equipment thanks so much for the lead. So proud of you Gurl!
Its a relative question as i could of done it for cheaper as rewired the entire boat and spent 5000 just on victron energy components, the motor was about 6000 and then 5000 in lifepo4 batteries, then i also built a solar arch later on and then i also purchased the latest model of portable honda gas generator to run hybrid
Its a self aligning flange bearing there were two originally but i damaged the one sliding it on the shaft but have a pillow block friction bearing on the aft part, thrust bearings is a wide variety of bearing its not a thrust block as your probably pictiring
im planning on buying a sailboat and i wanna remove all diesal and run 100% eletric is it expensive? i dont mind slapping a whole wack of batterys for battery banks
@@sailingokasolo6801 I'd prolly get someone to help me as I swore to never do electrical again as I had a bad experience. I live in BC so I'm thinking of a 30-32 footer
Including major electrical overhaul, batteries, victron 3kw inverter charger, solar array etc all said and done $15,000 CAD$ BUT MANY MANY HOURS OF WORK be cause I did everything myself
The unit can deliver 16hp continuous at 48v but if I changed the system to 96v I could get 30hp out of it. For now I could only afford a small battery bank and only have a range of 10 miles at 2.5-3knots which isn't far from engineless... Im currently halfway in a 600miles northbound journey in the dead of winter to my new job so I can save up for more batteries!
Sadly every thing in those batteries is imported from china, I appreciate the thought but don't let your self get robbed! Hope you still have the cracked panel, as just seal it and it will work!
Checking the math for DC circuit and ratio for kw and hp, it doesn't come out at 60hp. Sorry but 1kw = 1.34hp. So 12kw = 16hp. A 12kw motor at 48v drawing full power will need 250 amp. Wasn't clear if your total amphours of the 2 batteries is 150 or it is 150amphrs per battery giving a 300 amphr total. If the total is 150, at full throttle complete drain, you'll have about 1/2 hour of run time. Of course you don't want to do 100% drain. So at 50% gives about 15 minutes of useable power. Just paper calculations, but not looking good for what you think you have. 16 hp vs the 60 is the real issue to move the boat. Again, sorry, but that is the math.
Hi there Ill go over some details in the next video but the motor it 16hp not 60 (blame my accent) and I wish I had 300ah but for now the two batteries total 150ah because I couldn't afford more for the time being. So I use it in a very conservative fashion as it only allows about 10miles at 2.5knots but Imake it work for now and have travelled 250miles since i finished the install in December in very much less than ideal conditions... means waiting for the right weather window...
12 kw engine 150 amp hour battery? You have full power for 40 mins? Not to mention the center of gravity of the boat will be wrong as you have taken out so much weight. Fundamentally I support the idea but for the money you spent and the range you have it was silly. I forget when I watch videos like this one this is just a toy just hobby weather you live on it or not you need not go anywhere or do anything on a schedule. Not like you are going to be running for port from off shore 200 miles to miss a typhoon that is coming. A ten horse power outboard would make ten times more sence but its not about making sence or getting anything done... It is a dream come to reality. Enjoy it.
An outboard would be swamped in waves as small as 2 meters. I never draw 12kw its pointless. Anyways 2000nm + in some of the worst condition and remote placesi could test it in and i still make it to were i need. People went out at sea long before recorded history with out high powered engines... if you can't sail engineless maybe you should learn to do that before setting out. My range is approximately 45nm on a charge with 330ah and am gradually increasing the battery capacity and removing the diesel engine and fuel tanks adds up to less than weight than he lithium battries and motor combine to he point where i was able to double my water capacity.... anyways you do you and ill keep sharing my travels
Never do I claim to run 100% off the sun, Im no purist I use propane in the galley and gas outboard and generator. Im 53°north so not much sun at this time of the year. I've just transited 400miles of fjords and tidal rapids through the inside passage of vancouver island running as a hybrid. Also just picked up a lithium bank for a song that will more than double my range...
Amazing engineering. This is the perfect motor setup. Just add a Diesel generator for hot water and emergency electricity so that you have unlimited range. I would always want an electric motor drive my sail boat. All clean, all quiet, all reliable.
Just watched this with my 12 year old son. You are the definition of cool. So inspiring to him as he wants to be an engineer. Great work!
Thanks, I love to hear your son wants to be an engineer !
@@sailingokasolo6801 Heart attack pictures, fatty foods is animaIs cIogged arteries : th-cam.com/video/15wgYsToORM/w-d-xo.html !!! th-cam.com/video/pFPFnhfuLrE/w-d-xo.html Vegans don’t have this problem because that is the animals. Vegans don’t get clogged arteries, 4% cancer if you’re vegan. Meat based diet 51% death rate. That is extremely high for a frigging burger etc. Gorillas in the wild, have 1 percent cancer. And they never ever eat animals !!! Peer review science !!!!
TH-cam delicious vegan food. Time to change ✅❤️😉
@@sailingokasolo6801 , . ‘Smells bad’. 6 hours !!!! 🔴🦌. 5 days or more sitting inside your stomach puuuu-trifying !!! No fibre if you eat animals in their secretions !!! Timelapse. th-cam.com/video/lmSrUvgWiqE/w-d-xo.html . You’ve got to watch this 😲🤮 !!!! We’ve got long, long stomachs. Flat teeth. Little flat teeth 🦷😬. We are herbivores ✅❤️. Peer review science.
Fat is a heart attack. 🧟♂️🦠🍖🍳🍗🍔... 🔴🐮🐷🐔🐣🐙🐟..... Deodorant mask the symptoms. But 🧟♂️👟🧦🤮.
That’s why I’m vegan ✅❤️💪😬🦷😉. Fibre is plants and fruit and nuts and berries and tubers and lentils and beans and potatoes et cetera. Next day poop without any stink.
Now that is quite the achievement utilizing so many skills along the way and learning new ones too no doubt. Damn right you should feel proud.
yeah, every sailboat needs a different system in a way .... each hull is a different load, so there is a lot of research to do also, before the parts even ship.
so there will never be enough sail drive conversion videos.....but the fist thing anyone needs to know when they do a sail drive conversion is : Make Sure You Get A Re-Gen Controller !!!
10:50 that's the most concerned look I've ever seen on a dog! 🤣
She looooves when I raise the anchor and normally boat in gear means im going up to the anchor winch next... she is ready... more than ready!
Great work! I really admire your skills and knowledge about getting this project done!
You are a real Jill of all trades; I can't wait to see how the motor performs and how far you get on a charge. With your ability to sail on and off the docks I think the motor will serve you well.
Im currently putting thru the ultimate test a 400nm northbound journey via the tidal rapids of the inside passage of vancouver island! more videos to come
You’re pretty handy with a set of tools.
ive looked at some other sailboat channels but they are terrible, yours is by far the best
Aw thanks 😊
Very CLEVER, you must be so proud of yourself.
Learned a lot a still lots more to learn about!
Remarkable. Yet not surprising. I knew you could do it.
Congratulations on your upgrade. We are an electric-drive Bristol 35, currently cruising in the Bahamas. We are like a sailboat without an engine, sailing everywhere with a range of about 30 miles on 200 amp/hrs of AGM batteries at 48 volt. It will be interesting to see what you get with Lithium.
30 miles on 200ah thats surprisingly good what speed is that at and how much draw? I haven't pushed it to the limit yet but im averaging 10-13mile range at 2.5knots which isn't great but its auxiliary propulsion!
buy soar ektric 385 33.6 miles teksa bew xell 38.6 mike rangé
can't wait to see how it goes and stuff
That's a nice and clean setup, well done! Greetings from Nederland 🇳🇱
Well done ,you have done great installing eletric motor, seems you had better experience than I had .
I wish I had the skillset you do!!! Its incredible seeing you take this project on so masterfully!
Simply learning as I did it!
Happy for you Pat ! ♥
Really impressed, I will be copying you
So happy you got it working!
Thank you for posting your experience, and issues, with the electric motor. I am currently looking at repowering with electric. I am looking at the 18kw liquid cooled from Thunderstruck Motors. I also found some interesting reading on lithium batteries and making custom cells for cheaper than assembled (Rigging Doctor has a whole video on DIY lithium).
Would love to hear about your experience with the Lynac Lithium.
You make it look so simple XD I am sure it is not! Impressive job.
Awe thanks still learning everyday
Llevo más de 20 años navegando solo por los océanos. Al ver tu canal me doy cuenta que somos más uno con el maldito virus de la navegación en solitario y vivir a bordo de nuestros viejos y amados veleros... Mi próximo trabajo será motor eléctrico sin duda. Buen viento amiga!
F-yah … this is awesome. Full respect and we’ll done!! PS: I sail out of Hudson, QC … just across the Ottawa river from … Oka! Fair winds.
Awesome I grew up in Valleyfield and am literally looking a flights to Montreal atm to come visit the family!
@@sailingokasolo6801 Bon voyage … nothing like visiting with family in the spring sunshine! Recent warm spell melted most of the snow but you could still visit a cabane a sucre! PS: I have breakfast every Sunday in Pointe-Claire with some sailing friends. So drop me a line when you’re in town in case you might like being the celebrity sailor at one of our Sunday skippers breakfasts!
@@GrenvilleMelonseedSkiff496 would be lovely!
@@sailingokasolo6801 OK … well if you do fancy a complimentary breakfast in the company of some interesting sailors here in Montreal … post a comment here or on one of my TH-cam videos and we’ll coordinate from there! In any event, enjoy your time with family. ⛵️😀
Nice work!
Super boulot Pat, quand je remplace le parc de batteries sur la voiturette électrique de mon père c'est un vrai casse-tête tous les 3 ans, mais avec de la patience, et de la méthode ça finit toujours par redémarrer 🙂
neé batès add 15 perct too 24 perct more rabge every 3 yeàrs
Congratulations! Looking forward to learning about your battery range.
Nice catch on that miswire.
What a pain for such a small mistake on the manufacturer part
that was pretty awesome, Ive been thinking of doing the same thing
Lots of boat owners looking into it in the last couple of years! Thats awesome!
Excellent job
Glad to have found your channel.
Literally waow!
Well done
"Fuck yeah" fuck yeah!
🤣can't call myself a sailor without a swear or two!
Great work Pat👍👍👍👍
I love that box you built to house it, I just used the reducer from the company I bought the kit from but yours seems bulletproof. I got a 96v 18kw motor to push my 36,000lb 40ft boat. I used my old shift cables to control the motor but its literally connected with whipping twine and I need to redesign it...shrug, more content to share I guess. Nice boat, ill check out your other videos and subscribe.
How do you find changing the 96v system was it harder to source supplies
@@sailingokasolo6801 I charge the system two ways. I have eight 100watt solar panels in series mounted to my railings running through a 96v mppt charge controller( 4 solar panels on each side). I also have a 96v ac charge controller I bought off line. I use the ac charger to charge at the dock and/or I use my portable generator to charge the batteries at anchor and I can use the generator to give me a long range at slow speeds (turning the boat into a hybrid). I find that getting the chargers were a giant P.I.T.A and regret not just going with a 48v system. But on the bright side I have ample thrust.
buy 4⁰ foot oiçníc bost 52 mile range
very cool. i have a 35' Pearson and am looking to install this ME1616 at 48v as well...didnt realize that was the equivalent of 60 hp. i was considering a 2:1 gear reduction...Thanks for sharing!
16hp sorry my accent might of been misleading
750 watts is essentially 1hp, most diesel drives at non peak efficiency can be 1/2 of their peak, pushing close to hull speed just isn’t practical in electric. Most use the electric drive at 1/4 output to get range. A 3hp belt drive runs my 31’ waterline x 11’ beam over 3 knots in calm conditions.
buy thé 385 soar ektrc sail boat 33,6 mike rabfe teksa new xells 38.6 nike tange
Looks like you have an Australian blue healer, they’re wonderful cattle dogs very smart,had a good red one for 16 years, broke my heart when he died, still think of him, I love your boating show by the way, Love from Australia.
Winter the blue heeler is best dog ever! She grew up on board and sure hope she lives a long life by my side!
@@sailingokasolo6801Where did you meet/adopt Winter? (Guessing it wasn't in Au) You have beautiful eyes @1:10
@@Lana_Warwick hi I adopted winter as a pup from a cattle farm in the town of Quesnel as she was not a good prospect as a herding dog ( she is skittish) she has been my best friend for the last 5 years!
Great self build. Your channel just popped up. Welcome from down the coast in the Pacific Northwest from SV Touchstone. Relaunched and rebuilding as a parallel hybrid.
Hi there, are you in puget sound? Would love to hear about your hybrid conversion as my friends are about to do so!
@@sailingokasolo6801 Sure, some on my Instagram, nothing to TH-cam yet. Financial limitations, time and experiments.
Presently a 12v 'continuous' maybe duty winch motor no speed control, on V belt sheave. It was enough to launch and leave port. After purchase I found it was not practical to use for regeneration. I hope to later get a much better electric drive and batteries. Not expecting to have a large unit, found a Beta 16 so reasonable, I can't regret. Tired of deck generators personally.
Many old sailors just ran alternators off the driveshaft for regeneration, so I can just do that. 3k watts drive and 1k regeneration I would be happy.
Near Port Townsend presently, moving to Humboldt asap.
Thats how it goes I my conversion Basically took a year because of doing it on a paycheck to paycheck budget while working 50h+ a week on tug boats.
Im seeing some interesting bike hub motors used on 20-32ft boats and i find that quite interesting and an easy option but the ones I saw were direct drive.
I find it interesting that the only boats Ive seen set up with the pulley for an alternator were 60s 70s boats wondering why no so common these days.
@@sailingokasolo6801 Grin is one with a personal test boat with hub motor.
Very few references of v belt on shaft to alternator, at least on the internet. Fair amount of suggestion of negatives like off axis wear by belt tension(most from people that never attempted it). Simply mount alternator/generator above driveshaft and pick up weight of shaft or 2x, it should not wear more than an unsupported shaft. Most smaller sailboats prop size can make it unsuccessful.
I was able to get 18.75" double belt sheave between my wooden boat frames. Some 8" was still successful. Recommend the largest that there is room to fit. Bearing bolted to a frame just in front of a PSS shaft seal takes thrust and side load.
Everything low tech off the shelf engineering. Something to be said for not waiting in port for a missing diesel part to be shipped in. Same reason for the Kubota based motor. I will have the rebuild set on board before world cruising, easy in frame rebuild to me.
You did a great job!
To much on your plate when your trying to escape. Beautiful song
Awesome, looks like a lot easier to fix than rebuilding the diesel engine. 🙂
Only two moving parts the bearing and belt not much to go wrong other than if the unit was submerged.
Very well done! Looking forward to seeing what the range will be :) hopefully see you down here in Mexico soon 😀
Nice work! If I would have my own sailboat I definitely would go for electrical ASAP (doing everything myself like you did). Could you tell me how much you paid for everything? (Solar panels, engine, batteries, controllers etc...). Again, thanks for the video
Oh, I have thought about this so many times. We currently just spent a chunk on keeping our 50 year old ford dagenheim diesel running. We’re 45 foot full keel. Subscribing!
Yeah i figured id take the risk and worst case scenario I could always reinstall a diesel (I won't)
byt gren line 45 fiter 33.6 muoe hybre ektecrange
I really look forward to hearing what your range and running speed are like! When it comes time to replace my old diesel, I'll certainly be looking at going electric.
So far its only 10miles or so but its a tiny battery bank at only 150ah but im currently half way thru johnstone strait proving it can be done
Chapeau....really nice the work you did
good job use them skills
you are amazing!!!
I watched a sailor who was a electrical engineer who converted his island packet 27 into electric.. he said to mount the controller or whatever the piece is that has the aluminum fins so that the fins are facing towards the open and make sure said fins are running vertical in order to displace the heat faster?? You can find his video on TH-cam.. said he was the first island packet owner to make the conversion and he made his own battery bank. I would buy a bank like you have because you're paying to have a warranty
awesome, thanks for sharing this. I am just dissecting my failed Volvo Penta and if its a total loss I may go electric too. I already converted to 400 Ah Lithium last year and have 400 W of solar but would sure need more battery and solar and I'm a small boat so not sure where to put more panels. But great job you did, very motivating.
you cañt go wind generatur
you will wonder, but smashed panel could work very well if you epoxy it from the top, to prewent damade by water penetrated...
The company sent an other one and gave this one to a local liveaboard and it still works to this day
👍!!!awesome
Your heat sink is up side down the fins should run up and down so heat can escape not sideways.. it could over heat your control box .. ... happy sailing hope this helps..
I am very limited in ways to position the controller as the cables are so short but ive since added fans on the side of the heatsink.
@@sailingokasolo6801 great job .
@@sailingokasolo6801 I can't wait to finish my boat you are an inspiration keep up the great work
Great to hear working on more content specifically on electric motor
Hey, just found your channel. I like the work you have done.,May I offer some advice , it's not a criticism just a safety concern, you leave a lot of metal fillings in the engine bay, I am sure you've cleaned them up bty now, however you have to be carefully of things like that when working with electrical stuff. Try to put down a tarp or something to catch them when drilling, triming, etc. Got to keep that area clean and safe for you.
I didn't do any drilling in the engine room the only filling i seen upon rewatching the video were simply on my cabin floor not the engine bay, I agree tho that foreign metal shavings do not belong near electrical connection
You got this! :-)
Your conversion installation is fairly clean and tidy. Do you have an engineering or fabrication background?
For short periods, does the conversion provide similar power to the diesel (for overcoming a wind or strong current for example)?
I may have missed this, but do you need to change to a different propeller for the different torque curve of an electric motor?
Thanks! No fabricating background what so ever but love to learn new skills! So the old diesel was 50hp so 16hp is in no way comparable but I am currently navigating johnstone strait some of the fastest tidal rapids in the world altho i need to wait for favorable tide and winds other wise I can hop about 13miles a day motoring only. I still have the same prop and shaft as i did with the perkins but you can adjust the belt reduction ratio and motor rpms to match the prop
A cheaper car engine would be more economic and give you better range . I sail the same boat with a perkins diesel 72hp
Thirsty at full revs economic at half throttle, thanks for sharing best of luck well done young lady
The cost of marinisation of the car engine would probably cost as much as my motor did, but I hear you. 1500nm+ later I do not miss my old perkins diesel, its not for everyone but i knew what i was signing up for.
You have an endurance as well?
@@sailingokasolo6801 yeah mine is an Endurance 40 cutter rigged nice and steady build by windboats in Norfolk UK.
Lovely boat off shore , but a challenge in a marina . I love the living space , she's surprisingly fast with a bit of breeze. Where do you sail out of , I'm in crosshaven cork Ireland. Have a lovely day cheers
@@johnmeldrum4717 I am transient on the west coast of British Columbia Canada.
I would love to have that extra 5ft! 35ft is fine solo but I find it cramped the second i have crew onboard, altho my lenght overall is 48ft with the solar arch
@@sailingokasolo6801 your along way away from here,,,
I won't pop over for a coffee and a chat anytime soon, your an impressive young lady , well done with the boat modifications , wishing you fair winds, peace love and joy,
Cheers John
@@johnmeldrum4717 thanks john maybe someday we will be in the same ocean!
fantastic,I am looking at doing the same myself, I will follow you with interest
Same here, I want to do a catamaran with full solar canopy. : )
Awesome 👌 the more the merrier!
we would so much to see more of you than your hands.....
Sorry my dog has not quite figured out how to hold the camera yet.
👍
Hello, I love your boat and what you're doing with it. I'm sorry if you answered all these questions in your videos but I'd love to know more detailed specs, such as your boat type, length, weight and roughly what current draw is at different speeds. I have a Cheoy Lee midshipman 40 (20,000lb 3/4 shoal keel) and I already have a 57.6v 300ah lifepo4 battery pack (~17kw) I made from 18 cells for my house and the same multiplus-ii as you and my next move is electric motor when mine is ready to go.
Hello No problem don't mind answering questions its why im sharing my conversion.
The boat is an endurance35 ketch 22000lbs or about 12 tons full keel altho some may call it a long keel or 3/4 keel
My current battery bank is 330ah 52v lifepo4, i added a recycled diy bank since the video ( 10y old winston 260ah cells) which in perfect flat calm conditions will allow for 12h at 3knots drawing 1000w but thats never allowing the battery to discharge below 48v. the motor is an me1616 you can find the link in description and am satisfied with its performance and they are very modular ca be used with different controllers at different voltages and has been reliable altho i would recommend a different supplier than the link in description
thunderstruck electric motor carries a very similar kit and has a better customer service.
@sailingokasolo6801 thank you! I have 300ah Winston cells, about 7 years old but only used for 18 months and then sitting for 5 years. I bought 20 thinking I'd do a 4s and 16s pack but realized I don't need the 12v 4s and with the multiplus-ii you can get a max charge of 64v and max input of 66v so I went 18s. Have you done a capacity test on your diy pack? What did you spend on them? I'm still setting things up so I havent with mine but for 120$/cell I can't complain if it's a bit diminished.
Ive noticed so many expect me to have a 12v bank but I just have a 20a 48v to 12v converter running the house I paid $1000 CAD bought them from a friend
@sailingokasolo6801 I'm sure many people would love to see an update video on the system! I know I would love to see the specifics of how you did the two different banks and what you did for bms. Right now I'm working on integrating my 200a jbd bms and victron electronics with a raspberry pi running victron's Venus os. I want to figure out how to integrate a 1000a shunt and relay into my bms/victron environment if I go electric.
Note taken!
Wow! Inspiring! I've been in the thinking about this phase for awhile. About to fix up the old diesel while I dream about making this change when I've got the money. What's the length and displacement of your boat? What was the HP of the engine you replaced? Congrats and great video!
So I went with an "underpowered" option as i use the motor very much as auxiliary propulsion.
Motor is 12kw or 16hp, boat is 27ft at water line but 36ft on deck 42 loa 22000lbs displacement fullkeel she is an endurance 35
@@sailingokasolo6801 wow that's a heavy 36' boat! Mine is 41 but 19000. I guess the full keel adds a lot. How have you found that level of power pushing against a current?
Its more a question of battery capacity, Im currently navigating johnstone strait ( in one of my previous videos go through seymour narrows at 15knots speed) and I have not needed to go full throttle once although im not going against the current, but had to dock in heavy current (4-5knots) twice with winds, I didn't feel underpowered while docking... but if i would have to go against a strong current for awhile then I may get into trouble can use the portable honda generator to extend my range.
its all about good planning but it can be done even with this short range
Bad ass!
Nice job on the install. Is there a follow up video?
Just working on it i was not sailing for a while
Well done! Subscribed! Are you happy with your engine setup? I’m thinking of going with the me1117 for my C&C 30.
Hi there there are things i will be changing eventually but for now it works and its my main concern.... definitely going to need more batteries!
buy j88 soar ekrc sail boats
Awesome on the repower!! We are going electric too. Stuck on anchor with dead gas engine. Have all the components for the electric conversion EXCEPT the pulleys and belt. I am trying to source pulleys like you have -- for 7/8 (~22mm) shaft. hard to find a supplier in the US. Please help. Thanks so much for the inspiration!!!
I got my pulleys and cog belt from electric Motorsport my motor supplier but maybe worth contacting Thunderstruck for parts as i think they are slightly cheaper
I’d like to hear more about the equipment you installed.
What would you like to know?
@@sailingokasolo6801 Well I’m familiar with Lynac (sp) batteries but would like to know what kind of bms you are using, low temp cutoff, battery monitor system etc. I’m very interested in your choice of motor, brand, model number, where you bought it etc. Same with your solar panels. Of course I’m interested in the cost. I sail my Bayfield 32c in the same corner of the world you do and when the time comes I’d like to go electric too.
The batteries were built for my specific use not sure about the bms and low temperature shut off as even in canada the bilge always stays over freezing temperatures you can find a link to the motor supplier with specs in the description and same for the solar in the description
That' awesome!
following.
check out Sailing Uma, they did a conversion earlier last year.
Does it have regeneration capacity?
Uma is a big part of the inspiration to make this move! The motor does have regen but with the full keel its not the best output
@@sailingokasolo6801 can't wait to binge on your vids when I have some time. Love the west coast but havent been in a long time.
good luck
@@sailingokasolo6801 First video of yours I have seen, possibly you have aperture clearance for a larger and more aggressive pitch, 3-4 blade? I hear less than 18” maybe insufficient. I was able to fit a 22” time will tell what I can get.
I don’t think those batteries can supply the current that motor will demand for more than 1/2 hour max on full charge and with the 2 solar panel you have will need 3 fully sunny days to recharge in te middle of summer . A week in the winter months. All that to go 3 miles. 10,000 would have gone a long way on a full rebuild and then sum. Regards hope it all works out?
Well as I am in snowy canada Im running hybrid with a 2kw honda generator. Everyone has different needs and capabilities, since in completed the instal in december I have traveled 250miles north and still have a bit over 100miles to go before reaching my new job the 150and battery bank is temporary until I can afford more. My range is about 10 miles at 2.5knots but that means careful planning
@@sailingokasolo6801 @Rigging Doctor they run a similar hybrid (Honda) most motoring they ever ran was ICW an inland Eastern coastal waterway. They keep power output low other than to get expediently through a bridge way forcing the generator to be used.
This is very interesting. Im real curious how it works out in the long run being up here in the PNW. For me down in the puget sound it seems if i actually want to get anywhere i have to spend the day using my motor. The damn winds up here are either on your nose or on the stern 95 percent of the time. I think about when i go to the san juans and having to motor for 80 miles. Same way thing up in the fjords in canada, lots of motoring. It'll be really interesting to see how this motor will work out up here. oh and very nice by the way.
Well i just finished transiting johnstone strait (literally just arrived in port mcneil) my battery bank is very small and I plan on doubling the bank the second I get back to work as I only have 10mile range at 2.5know so Im basically almost engineless atm... but I make it work as im now only about 120miles away from my job and finally managed to get the motor working in December while in the gulf island so I since december i had to dogdge many storms and less favorable weather, qe had lots of snow this year but Ive now made it 250miles since the conversion was finished
@@sailingokasolo6801 Thats very cool!! Im looking forward to seeing future videos with your bigger battery bank. Will you be able to get more speed with the motor setup you have? would be nice to get up to 5 knots and do that 10 miles in 2 hours.
get 1⁰ times lith batr 1⁰ mike ràngevtoo ¹00 mike range
Hi do you have the colour code for the hull of your boat☺️👍 Maybe in RAL.
I wonder if it's possible within realistic terms to make the system throttle by wire aka wireless much like Harley and other motorcycles have converted to..
That would be awesome im unhappy with the throttle that it came with because its so big and easy to trigger by accident
J'ai hate de voir la prochaine vidéo, j'aimerai aussi passer à l'éléctrique. En attendant c'est à la voile que je bouge de mouillage en mouillage et utilise au minimum mon moteur. Ca tombe c'est fait pour ca...
Exactement le nombre de gens qui sont abasourdi que j'ai choisi un "petit" moteur a 16hp pour un voilier de 12m
@@sailingokasolo6801 Il faut savoir qu'une bonne partie de ceux qui voyage en voliers, font du moteur et non de la voile. Donc pour eux l'éléctrique est impensable. Ou ceux qui allume le moteur quand ils sont à moins de 4 nds. Je trouve ca aberants.
@@sailingokasolo6801 I chose 16hp diesel Beta over-propped so it will not develop peak hp, instead running at peak torque on the prop I chose for regeneration ability on electric drive. Some would say all wrong, sailing vessel first to me. I am not interested in power levels required to near hull speed. The largest antiquated diesel previously fitted was 22hp.
Would it be possible to install the electric motor on the shaft with a diesel engine still there?
@@Mafiakitty given there is enough room aud that the engine transmission can free spin without damaging it, absolutely
Is your motor mount, rpm converter home made or did you buy it off the shelf?
The transmission system is 3:1 cog belt and pulleys and then the mount is my design as the shaft is lower than the engine mount the ones on the market were not ideal
Great job I have a Hunter 30 and would like to go electric. What size is your boat what’s the cost of the electric engine you went with? Thanks
Hey that would be an ideal type of boat to convert, mine is an endurance35 and 12tons quite heavy for her size you can find a link to the motor kit in the description with price but I haven't quite "finished" yet as after 400miles ive decided to add more electronics and various devices to make it more user friendly so far im at $15000cad including charging system and batteries. More to come in next video
@@sailingokasolo6801 thanks will do I subscribed so I will be watching. I have a channel as well but I’m in Rochester so I’m researching equipment thanks so much for the lead. So proud of you Gurl!
buy j88 sopar ektrc sail boat 22.5 mile range telsa neww xells 26 mile range
Hi.
I am trying to make an hybrid diesel electric.
Can i ask what this cost you ???
Its a relative question as i could of done it for cheaper as rewired the entire boat and spent 5000 just on victron energy components, the motor was about 6000 and then 5000 in lifepo4 batteries, then i also built a solar arch later on and then i also purchased the latest model of portable honda gas generator to run hybrid
I'm struggling to understand what recycled stainless means?
Off cut discated or reused metal
cool. did you check the ratings of the bearings, including the one in the motor? Did you use thrust bearing?
Its a self aligning flange bearing there were two originally but i damaged the one sliding it on the shaft but have a pillow block friction bearing on the aft part, thrust bearings is a wide variety of bearing its not a thrust block as your probably pictiring
How much horsepower are you getting from that electric motor?
16 hp but i rarely use more than 5hp other than docking or short outburst
im planning on buying a sailboat and i wanna remove all diesal and run 100% eletric is it expensive? i dont mind slapping a whole wack of batterys for battery banks
Definitely relative to the size of vessel and if you're doing the work yourself or hiring someone
@@sailingokasolo6801 I'd prolly get someone to help me as I swore to never do electrical again as I had a bad experience. I live in BC so I'm thinking of a 30-32 footer
could you please share the total cost of this project ? Thanks
Including major electrical overhaul, batteries, victron 3kw inverter charger, solar array etc all said and done $15,000 CAD$ BUT MANY MANY HOURS OF WORK be cause I did everything myself
Could you please supply the name of the Canadian battery and solar panel suppliers.
www.lynaclithium.com/product/51-2v-72ah-platinum-series/
1:55
How much did you pay for those batteries?
2000$cad each (×2) for 51v 72ah
From lynac lithium technology
Great video - did you design the motor framework?
Yes altho I definitely inspired myself off electric yacht mounting system
@@sailingokasolo6801 Nice work!
Also how many HP will the unit deliver and what do you expect your cruising speed and range on a full charge
to be ?
The unit can deliver 16hp continuous at 48v but if I changed the system to 96v I could get 30hp out of it. For now I could only afford a small battery bank and only have a range of 10 miles at 2.5-3knots which isn't far from engineless... Im currently halfway in a 600miles northbound journey in the dead of winter to my new job so I can save up for more batteries!
@@sailingokasolo6801 more batteries are good but recharging on 800 watts is your limitation
*Alert - could be taken as a creepy comment - but not intended that way* She has such a pretty attractive face !
Never know sometimes a compliment is all one needed to put a smile on their face!
That's a blue cattle dog
Australian cattle dog indeed!
Salut Pat , c’est quoi exactement ce que tu es entrain d’installer ? Désolé mon anglais est limité.
Salut cest un system de propulsion electric que jai construit moi meme avec batteries au lithium je vais generer des sous titre quand j'aurai le temps
Ok merci ! Hâte de voir la suite, bonne continuation 🙂
where did yoiu get the pulleys from?
From ElectricMotorsport along with the motor and controller
Sadly every thing in those batteries is imported from china, I appreciate the thought but don't let your self get robbed! Hope you still have the cracked panel, as just seal it and it will work!
Checking the math for DC circuit and ratio for kw and hp, it doesn't come out at 60hp. Sorry but 1kw = 1.34hp. So 12kw = 16hp. A 12kw motor at 48v drawing full power will need 250 amp. Wasn't clear if your total amphours of the 2 batteries is 150 or it is 150amphrs per battery giving a 300 amphr total. If the total is 150, at full throttle complete drain, you'll have about 1/2 hour of run time. Of course you don't want to do 100% drain. So at 50% gives about 15 minutes of useable power. Just paper calculations, but not looking good for what you think you have. 16 hp vs the 60 is the real issue to move the boat. Again, sorry, but that is the math.
Hi there Ill go over some details in the next video but the motor it 16hp not 60 (blame my accent) and I wish I had 300ah but for now the two batteries total 150ah because I couldn't afford more for the time being. So I use it in a very conservative fashion as it only allows about 10miles at 2.5knots but Imake it work for now and have travelled 250miles since i finished the install in December in very much less than ideal conditions... means waiting for the right weather window...
ßoo warthigvrun onlyv3 minyt too 6 monts 7,5 mibute witer range warthig run obky
12 kw engine 150 amp hour battery? You have full power for 40 mins? Not to mention the center of gravity of the boat will be wrong as you have taken out so much weight. Fundamentally I support the idea but for the money you spent and the range you have it was silly. I forget when I watch videos like this one this is just a toy just hobby weather you live on it or not you need not go anywhere or do anything on a schedule. Not like you are going to be running for port from off shore 200 miles to miss a typhoon that is coming.
A ten horse power outboard would make ten times more sence but its not about making sence or getting anything done... It is a dream come to reality. Enjoy it.
An outboard would be swamped in waves as small as 2 meters. I never draw 12kw its pointless. Anyways 2000nm + in some of the worst condition and remote placesi could test it in and i still make it to were i need. People went out at sea long before recorded history with out high powered engines... if you can't sail engineless maybe you should learn to do that before setting out. My range is approximately 45nm on a charge with 330ah and am gradually increasing the battery capacity and removing the diesel engine and fuel tanks adds up to less than weight than he lithium battries and motor combine to he point where i was able to double my water capacity.... anyways you do you and ill keep sharing my travels
That's just stupid, say you are in a storm for a few days on a lee shore with a good harbor, but can't make it in because no solar power
Never do I claim to run 100% off the sun, Im no purist I use propane in the galley and gas outboard and generator.
Im 53°north so not much sun at this time of the year. I've just transited 400miles of fjords and tidal rapids through the inside passage of vancouver island running as a hybrid. Also just picked up a lithium bank for a song that will more than double my range...
dubled rang ¹⁰ miles too 2⁰ miles
Nice work!
Nice work!