The cost per wash is still high as with all DI systems because they all use up resin and there’s no getting around it at ~$50-75/10lbs. Spend a little more and get a 4 stage RO/DI system. You can build a complete system with filters, hoses, booster pump, water vessel and supporting gauges and flush system for less or about the same as a CR Spotless system but the main advantage is about $.25-$.50 per wash vs. $2.00-$4.00+ per wash depending on your TDS. It’s worth the research and effort. People argue it takes up more space to have a 10 gallonish size holding tank but I find the footprint is about the same as a CR Spotless just taller so no real loss of floor space. I plumbed mine from the basement so no loss of space.
I have a RO DI setup feeding my clear ice maker in my kitchen. Quite a bit of waste water generated, and there is a supply limited by the size of your holding tank.
@@Samlol23_drrich If you care about wasting water than fine. For me it’s mere penny’s in cost and our town reclaims all water so no real loss. Some people route waste water to a rain barrel for garden or flowers. I already mentioned that 10 gallons is a small footprint and you’re not using 10 gallons to rinse even 2 cars at one time. Waiting for it to refill is plenty practical for any homeowner.
Furthermore you can reduce waste water by half if you put another RO membrane inline to capture and filter the waste water. Very common thing to do at minimal cost and it also doubles the 0ppm output.
@@JohannGambolputty22 I don't care at all about wasting water. I have a well, so it doesn't cost me anything. It just takes a really long time to make 20 gallons of water or 10 gallons of water, for that matter. Do you have your set up any place I would love to see it? I'm wondering if it's a pressure tank like I have for my well, Because that's a lot more expensive to set up something like that than to just buy a cheap di system
You can also add a carbon filter as a pre-stage filter before the expensive resin which will almost double its life expectancy if you can chlorine in your water. That’s what I did and was able to get a huge bump in how long it lasts.
$30 bottle of Superior 4 spray wax dilute it with water so it will last you for months. Spray on top of regular car soap then rinse and you'll never have to worry about water spots.
If ur not a detailer there’s no reason for one just get a good drying aid before your last rinse, wash in the shade and a good microfiber towel to dry you’ll be fine.
There's a couple of big compromises with that system. Min flow and inability to filter PPM down to a respectable # (less than 10 or so). That's a no go for most places downstream with hard water.
That price is obscene. They are way overcharging for their resin. You should be able to get resin for $50 for 10 pounds and bring the cost way down to around $2.00-3.00 per wash.
Need to measure the TDS of your tap water. That system will chew through your wallet unless you have low TDS. Here it’s like 400 milligrams per liter which is pretty high. Just means your resin will wear out quickly (like after 40-50 gallons).
It’s measured in parts per million or liters per grain. You probably mean 400ppm which is on the higher side and you’re 100% correct. However there’s also things like dissolved CO2 that burns through resin too so a TDS meter won’t tell you that. YYMV on any of the DI stuff. That’s why I do Reverse Osmosis instead.
The pressure washer would be for your wash cycle before the spot free rinse. More then likely a pressure washer would need a bit more then .75 gallons per minute of water flow
Terrible flow even only to rinse off the vehicle! The output of the final screw on hose tip which acts a regulator is 0.75 Gallon Per Minute. The flow is not enough for even the cheapest of electric pressure washers. Lease a true di filter tank from Culligan for $250 deposit, and $130/month or 1000 gallons @
The cost per wash is still high as with all DI systems because they all use up resin and there’s no getting around it at ~$50-75/10lbs. Spend a little more and get a 4 stage RO/DI system. You can build a complete system with filters, hoses, booster pump, water vessel and supporting gauges and flush system for less or about the same as a CR Spotless system but the main advantage is about $.25-$.50 per wash vs. $2.00-$4.00+ per wash depending on your TDS. It’s worth the research and effort. People argue it takes up more space to have a 10 gallonish size holding tank but I find the footprint is about the same as a CR Spotless just taller so no real loss of floor space. I plumbed mine from the basement so no loss of space.
I have no true need like all of us to spend that but hear yes the RO system really helps the DI. I would love to know more about your setup. Thanks!
I have a RO DI setup feeding my clear ice maker in my kitchen. Quite a bit of waste water generated, and there is a supply limited by the size of your holding tank.
@@Samlol23_drrich If you care about wasting water than fine. For me it’s mere penny’s in cost and our town reclaims all water so no real loss. Some people route waste water to a rain barrel for garden or flowers. I already mentioned that 10 gallons is a small footprint and you’re not using 10 gallons to rinse even 2 cars at one time. Waiting for it to refill is plenty practical for any homeowner.
Furthermore you can reduce waste water by half if you put another RO membrane inline to capture and filter the waste water. Very common thing to do at minimal cost and it also doubles the 0ppm output.
@@JohannGambolputty22 I don't care at all about wasting water. I have a well, so it doesn't cost me anything. It just takes a really long time to make 20 gallons of water or 10 gallons of water, for that matter. Do you have your set up any place I would love to see it? I'm wondering if it's a pressure tank like I have for my well, Because that's a lot more expensive to set up something like that than to just buy a cheap di system
Quick connect hose fittings would be good to have with a setup like that. Great video as always!
You can also add a carbon filter as a pre-stage filter before the expensive resin which will almost double its life expectancy if you can chlorine in your water. That’s what I did and was able to get a huge bump in how long it lasts.
A year later, how well is this system holding up?
I came for the knowledge but stayed because I was glad to see God blessed him with a great Queen💯🙌🏾 Congratulations King🎩
What hose are you using. I've been thinking about buying the Copper Bullet hose as seen on TV. Thanks
Resin can be regenerated with a couple of chemicals from lowes and a lil time. Instead of tossing it, regenerate it and save a ton of cash.
Nice video! I'm building a auto detail cart, I was thinking about using this system to create a 4 stage filtration. Love the Tundra!
$30 bottle of Superior 4 spray wax dilute it with water so it will last you for months. Spray on top of regular car soap then rinse and you'll never have to worry about water spots.
You should invest in a pressure washer and hook it up to the filter. The truck is looking great
Thanks 🤙
It wouldn’t feed enough water for a pressure washer and it would burn out .
Can this be used with a mobile water tank
I didn’t think California let you wash your own cars lol
If ur not a detailer there’s no reason for one just get a good drying aid before your last rinse, wash in the shade and a good microfiber towel to dry you’ll be fine.
Your old roommate needs to stop playing
There's a couple of big compromises with that system. Min flow and inability to filter PPM down to a respectable # (less than 10 or so). That's a no go for most places downstream with hard water.
Not bad at all. About $4.76 per wash from my math. I spend around 10-12 every time i go
That price is obscene. They are way overcharging for their resin. You should be able to get resin for $50 for 10 pounds and bring the cost way down to around $2.00-3.00 per wash.
Need to measure the TDS of your tap water. That system will chew through your wallet unless you have low TDS. Here it’s like 400 milligrams per liter which is pretty high. Just means your resin will wear out quickly (like after 40-50 gallons).
It’s measured in parts per million or liters per grain. You probably mean 400ppm which is on the higher side and you’re 100% correct. However there’s also things like dissolved CO2 that burns through resin too so a TDS meter won’t tell you that. YYMV on any of the DI stuff. That’s why I do Reverse Osmosis instead.
Super dope. Tundra gang!
Those filters may be expensive but it’s much cheaper than a whole dialyzing system on the side of your house!
What’s a dialyzing system?
did u let it air dry?
Yes let it air dry over night in the garage and not a single spot left behind
That’s a bro truck for sure.
I like the spot free system. My question is...how did your ex roommate know where you moved to?
Square up on that foo...
I bet that system will not work with a pressure washer.
The pressure washer would be for your wash cycle before the spot free rinse. More then likely a pressure washer would need a bit more then .75 gallons per minute of water flow
Terrible flow even only to rinse off the vehicle! The output of the final screw on hose tip which acts a regulator is 0.75 Gallon Per Minute. The flow is not enough for even the cheapest of electric pressure washers. Lease a true di filter tank from Culligan for $250 deposit, and $130/month or 1000 gallons @
Is it dialed in? Lol
He knows where u moved to? That's not good