Cheapest DIY Flat Roof Installation - After watching, you will be able to Install a Rubber Roof easy
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2024
- Watch how to install the easiest, DIY, and cheapest flat roof in a few hours. This method is for anyone with a slightly slanted flat roof who needs to recover it. This rubber roof will last 20 -30 years if installed correctly.
Turbo Poly Seal
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
Chapters:
0:00 Quick, Cheap, Easy Roof
0:25 Requirements
2:38 Installing the base
5:59 Installing the Cap Sheet
8:32 Welding membrane to the wall
10:59 Installing membrane around vents
17:00 Securing roof for the night
22:33 Flashing in vents and vent pipes - แนวปฏิบัติและการใช้ชีวิต
![[LIVE] : ONE ลุมพินี 66 วันนี้!! คู่เอก "ก้องชัย vs อัคราม"](http://i.ytimg.com/vi/j4uI5Uy8mWQ/mqdefault.jpg)
What great honor his son brings to his dad! Beautiful! God bless you and yours!
I have a bakery that I have patched the roof on for 25 years. Each year I got better. NOW I can put a new roof on because of your video. I watched most all of them. (No way my wife will go up there). This is my first comment ever. I have to let you know I appreciate your work.
That is awesome!
Yeah, wish I have one of those wife tools😉 very nice video. 👍
Having a bakery your probably great at spreading frosting roofing is almost the same
The lord parts with knowledge in many ways young jedi. These are not the roofs you are looking for
I don't recommend you to do what you saw in this video unless existing roofing surface as sound as it is here and it's slope is a little bit steeper.
The installers did not pay good enough attention to overlap seems, besides should use a heat- gun to weld together.
I recommend you to find a roofer with experience and install a torch-down modified roof on your flat roof otherwise you can end up with more problems than you bargained for.
I really love how simple this roof material goes down
Finally, a YT video with American contractors demonstrating the process, using materials available in the US market! I’m not necessarily “Made in America” for domestic products sake- just for some reason all the YT videos I get are from UK! I am gearing up to tackle my first EPDM garage very low slope roof. Joists, sheathing and roofing all gone south.
Ya he made a lot of mistakes that may come back to haunt him. But,
Im a bonified roofer.
I had my license.
Retired now.
All you wanna be's give him a break! You know this man put a lot of confidence in people who needed an answer to their roof issue. He made it look easy and very entertaining.
You guys know dam well this roof may never leak. He did some things you called out right away without remembering that the rain was coming. How would you have sealed that edge? By torching it! Wrong! He did it right cuz he had to come back to it.
Good job, Ol man.
yeah it looks really nice
Your comment is clear as mud.
@@info411 no it’s your fault. You don’t do roofing
@@AlloyedFrequencies you stated that he made a lot of mistakes and you didn't mention a single one and then you say way to go, which is it? Name those mistakes Educate us.
fantastic video! you guys are class acts!!!
This is an amazing video. Thanks for posting.
Thank you to share your experience. Professional.
As a highly and I express high I and fellow transient workers recommend putting two roofs on this immediately to ensure success best of luck fellows
This looks like a potentially AWESOME product. Clearly it has ease of APPLICATION. Next test is PERFORMANCE (i.e., no leaks) and then LONGEVITY. (Those are the three test and the final TEST or issue is PRICE.) $2 psf is very tolerable if the performance is good and the longevity is long.
I'm a potter and I got the knowledge how to do my own roof now thanks 😉
That's great!
EXCELLENT VIDEO!!!!
Nice job! This is one of the best videos on the application of APP membranes. The video gives complete details right from the cleaning of site, application of Primer, Fixing of APP sheets with hot torch method & finishing with siliver paint.
I can almost taste the paint but I'm not at work yet so I will have to wait
This is an SBS membrane, not APP. See the bill of sale at 1:09. Also Top Shield states that their SBS membranes are not to be torch applied.
Wow! I am having a roof put on soon. I am going to help thanks to this video!
LOL - LOL - LOL - LOL
How very puny of you
Wonderful video. Excellent.
Many thanks!
What a beautiful couple nice job guys keep doing your great videos
Nice to see your son with you.
Thank you sir now im ready to be a certified roofer
Great stuffs! Thanks Doc. Immensely enjoyed it (what about the silverly UV protectant at the end?)
May God bless you both and thank you so much for sharing your information.
Mujer trabajadora 👏👏👏
You guys are awesome
I automatically liked your video because your wife is doing all the work lol
Can this be used on a brand new plywood sheeting sloped roof?
Good video . How do ya know if you are allowed to add another layer ? What if a couple already ? Are there rules ? Thanks
can you provide me with the name of each of the rolls you used on these jobs. thank you.
Sorry it was not a bad try for doing yourself but it was inproper installation. As a roofer for 25 year I'll tell you what you did wrong. Before you lay out the base you have to apply primer which some roofer call glue, the second thing you did wrong was when you installed the cap sheet you have to stagger it from the base so the laps don't land on the same spot you had to cut the first roll of cap down the middle but I would have cut was the base so I could start with a full roll of the cap the way you did it if one of the laps fail the lap underneath it could fail to because of the trapped water. I don't know where you live but if you get winter weather that will be an issue.
Your installation on the pipe is wrong you are supposed to install a cone over the pipe then put a piece of base down on the cone then put you cap on and it would be in 2 piece s so it wouldn't look like garbage you lay out a piece to pass the pipe cut around it the next piece 6 inch overlap the other way on the pipe and it's good to go and looks nice too and don't forget to use asphalt primer on the cone
You didn't need to you plastic cement on the seams to make it watertight all you had to do was pass you roofing touch on the seams
Allsand is meant as a last resort of large pipes that they don't make cone inserts for not a wash room pipe and your wash room vent pipe you should have risen it up that cap comes off and you should have built it up with 2 layer of 2by4 and flash it in with your base and cap sheet it you live in an area where it snows you are going to have problems
@@migueldefreitas1367 if you have a roof with tar and gravel (flat) do you need to scrap It up before doing this process to it?
No you can put down what roofers call protection board first and screw it down to the existing roof
Great video, i have a 3-12 pitch roof with shingles is this too steep; will the shingles and under lament need to be removed before applying this peal and stick base and top?
Thank You for this information. I will watch 20 more TH-cam instructional videos and compare techniques.
Be careful up there.
I enjoyed your video. Thank you for posting it. That said I have a couple of questions. I am about to venture into doing a roof in a commercial property of mine after I got quoted a ridiculous amount of money to either repair or install a new roof on a 4500 square feet roof top. On your video looks like to just put the new roof membranes atop the old roof. I was under the impression that the old membranes or old roof had to be removed? Please advice. Thank you very much . Sami
Hi, can you use this type of roofing on shed roof or do I have to use asphalt 3 shingles? Thanks
Great job Dr. and Gracias for the Tips looks to easy I'll find out tomorrow GOD BLESS YOU
I love it. I think I have to wait until spring the weather is too cold and rainy right now.
I like the whole process. I am in kenya how can I get this materials?. Do you have an agent
Nice to see a new video. And how about you pros, working a five gallon tar bucket with clean hands! I have a flat roof with a slight pitch, so I’ll stay tuned. Y’all make it look easy. Thanks from Michigan.
It is really that easy. my wife and I did that very fast
Yea man it's easy to keep those hands kleen just never touch it
Great video Roof Doctor. you have inspired me to fix my mobile home roof. I was wondering if I could buy a few minutes of your time for a video call or phone call to let you see my situation and recommend what approach to take, be it peel and stick, torch down or some other kind of approach.
Very nice video, it will help me in the roof of my farm house , with love from Silchar ,India.
Great 👍
So the pipes can I just place boots to them for extra protection? Also where did you buy the torch?
How much does a roll weigh? Would that work for a Florida room?
thank you I'm going to do my roof just like this , I got a estimate for 10,000 that's a eye 👀 opener
Materials and Labor ! for roofs with complete tear outs and new roof can be 3x materials $5K will get you $15K final ! Always always get many bidders and learn from the bids !
always lay a upside down nailed sheet around edges
Our crew always leaves extra nails for the next couple
Thank you. Where can I buy super silicon sealant?
Will this material and system work in harsh climates with wind had snow?
People who work together,....................stay together. Great work!!! Excellent content! Thank you!
Most counties of the USA allow a max of 2 layers to a flat roof (check with YOUR a county building Dept). After that you have to remove the old down to the plywood strata. Also, roofers comments indicate and 80 lb roller is needed to rollover the material.
That underlay is awesome not seen that in UK. The only worry i have is if the old roof was leaking anywhere there could be rotten boards under your new cap felt? I would always recommend a re board and felt where possible, What do i know you are the flat roof god haha love your videos thanks for the refresh i have one on next week unfortunately with a leak which most likely will need new boards fitting.
I think the roof was made of Twin-T's (concrete)
Wait for the video old wood doesn't rot in the end,try to keep up before you get fired
Awesome class
thanks
Great vid where can I buy that material,I'm in Florida
Thanks you so much 🙏🏽
Plz explain how to make pitch
Dankie, baie goed gedoen! :)
Ten minste help dit jou. Ek sien min Suid Afrikaners hier in the VSA. Hoe out is jy? Waar bly jy? Teks my op my cell 203 858 0080
I brain not understanding now is hurted not work good brain badly understanding
Do u have a list of everything u used and where u possibly bought everything u used. I live in Pennsylvania and am not sure where to buy everything we need and need to know how to extend our roof out to add gutters to our lower deck
I have Henry 887tropi cool silicone put on flack roof but have some bubbles how do I fix still use silicone or use different material
Thanks for the video, I just learned how to get plastic roof cement out of the bucket, and on the trowel better, watching the son...
Thank you for so much for sharing, my question is that you don't need to take out of the old membrane ?
Ok Alexa turn off but first say th least intelligent video you sell me more about college
Where can buy this black paper they dont have in home depot or lowes
Great video. I just need a wife who will go up there because mine wont!!! 😁
Not everyone has a wife like yours and mine. Mine has always worked with me since we been married, we were were self employed all our life, married 50 years this year
I am so sorry
Could you please post the list of all materials needed to purchase from this video.
I think the part where you torched and glued will leak overtime. The proper way is to install the ridge and overlap the tarp.
good video but that is 1 part was a very bad instruction...
Did he remove the old roof membranes before placing the red backing pieces?
What is cashier over the rubber? Water shield ? I'm in WI shop Nenards. Trying do mobile home addition with flat roof. How do I get rubber roll up on roof by myself?
20 years old roof finish looks absolutely UV Stable
Can cap sheet handle foot traffic?
Can I roll it over a flat roof that already has elastamoric coating?
Can I use Tri Built Granular Surface Self Adhering Underlayment as a Base layer before the Torch Down ?
I do that many times and it works good
What products do you use? What about the sides?
Where can I buy material. Have 35x40 flat roof. Please help, Thanx
I like it thank you
You need to watch it again all the way to where the robot pisses off the roof
I like butts
YOU HAVE 3 STARS!!!!!
I put one under where under lament should be
can this be installed over a metal roof?
As a 35 year roofing expert, I would not recommend it.
Excellent work
Thanks
By what standard is this excellent work, its complete BS.
This a crap install of a good product. Not supposed to install this over an existing membrane.
I like to do the same to my low slope roof, but there is a L section need the edge that as a slight U indented area that collect water and it moves to the drain pipe. How do I shape that to the old roofing? Can I use a hand torch to finish the edge?
You don't, you foolish Americans, this roof is like a mahgwi don't ever get it wet and never ever step foot on it after midnight
Good job, now I going to doing , I hope doing good like your people thank you God Bless everyone 🤍🤍🧡🧡🙏🙏
Brain only parts need be
Bless you cause know any sleep not mak cents brain not rest to harder for am
This job is one giant bandaid ,reminds me of when I had to patch a hole on the inner tube of my bicycle.
when you do a new installation of peel and stick its a 3 layer process versus 2 and it's just as effective as torch if done properly. If you a layover is just a bandaid youll be really surpised how many homes make it 15-20 more years with a band aid.
I think that's kind of the idea given the title of the video. It's the old saying in business... "you can have it fast, right or cheap... and u can only pick 2." This was fast and cheap, not necessarily "right" according to pro-roofers. BUT, for a homeowner w a bad leak who is desperate for a fast & inexpensive solution (that doesn't necessarily need to last 10 years) this video is semi-helpful.
I don't even have $2 to spend per square foot so I'm totally screwed. Was considering using 4x8 coroplast boards ( only cuz i have like 100 sheets just sitting in my garage) to go over the current roof (glued down). Then i want to tape the seams with EPDM tape and coat the entire surface with expoxy resin. Then put on new perimeter flashing. I realize I'm going to create more issues but I'm stuck and SOMETHING must be done ASAP. Unless some roofers want to donate their labor AND materials, I'm on my own. Water is a sinister foe!
@@Jimd905Well, he just spent $6,500 on materials that are bound to fail within a year or two. Doesn't seem very economical to me.
Thank you for your video. You should careful not to burn down the roof, right?
Pig skiner
You could get coring drill bits for cutting out the hole for the vents or maybe it won't work? What do you think?
a lot of effort to go get a tool and do a little cut. The hole is never in the right spot so you still have to cut slits to move the membrane around to position it
@@FlatRoofDoctor I see. Thanks.
What causes the granules to come off a torch down roof like that? Have a 5 yrs old roof, has lost considerable granules, they clog the scupper box which requires us to clean it out 2x a year. We are going to have to silver coat soon otherwise the roof will be too exposed to UV. It's nuts for a roof to start failing that quickly but from talking to supply house, granules coming off is becoming more and more common
This is like a master class in how NOT to install a roof...
I so agree! But they will call us haters. I don't know what kind of Dr. he is, but surly not a roof Dr.
I have a 3 seasons room and screen room that has a compromised flat roof i would love to do so
Something like this but have some questions is there an email i can send to or a way to chat so i can show you my situation ?
Where do you purchase the materials
Great video.... I see 2 problems
1: you always have to cut your first run of S A base in half alway. To prevent a lap on lap Meaning when you run your cap sheet you're gonna have a lap on top of the other lap thats not good . Cutting your first run in half prevent this .
2 : You need to use an 80 pound roller . The roller is used to remove any air pockets that may be trapped in between the materials. In the summer when its hot the gasses starts to build up in the pockets causing the material bubble up or causing the material to separate in time .
He mentions the roller at 21:10 but they step on it instead.
Stepping on it and not pass the roll on it is the same thing and he also didn't use primer on the roof before he installed the base sheet some roofer call it glue
@@migueldefreitas1367 yeah I s
I was thinking to myself as she's takes off the plas
😊
where is your insulation layer?
Hello sir what is the name of the materials and from where can I get them ?
Where can I buy this material in Canada? The site is only for the US shipping areas
sorry
Very informative!
If your first layer isnt fully bonded to the roof how is your cap sheet stuck to the roof
Would really like to know what the material you used?
Put the adhesive on a rag inhale and you will figure it right out
Great video I enjoy Watching your wife; son and you working together Congratulations
I have a torch down roof with leaks. The rolled roofing has white gravel on top. Can I patch over this white gravel roofing? Seems that the patched of new roofing won’t adhere to the old roofing with the white gravel
Yes it will if you have the right materials. Some are used for adhering the cap sheet and some are used to flash. Make sure if there is metal to get some primer first. Get the quick prime and you can flash right away and also get the white granules to cover your patch and if you got the right stuff your repair should look like it was still brand new haha
@@garrett3113 thanks
I have been roofing for 25 years. That type of roof is not made to be installed over an existing roof without an ISO panel or clean sub. It also needs to be rolled down with an 80 lb roller to bond materials. It specifically tells you not to use torch or flame. You are supposed to use a hot air gun. Its not a torch down system. It will def be a problem
Ok truther that's your third worning I'm not going to write you up this time though looks like we're going to need you tomorrow but mostly it's forcuz I am no longer read and rite be cause this video break me mind not work
He's going to roll his imported wife over it
I think it's time the old Doc retires !
Well the roof doctor has been doing this for much longer than you. His way must work.
Ok Karen!! Lol
Link to roofing material? And is the bottome layer required?
TopShield SBS. Not only is the base layer required, but you're not supposed to install the system directly onto an existing roof. Good product, cheapo installation.
Why are you laying the runs across the roof? Why no lengthways? Plus, would it not be better to have done the flat roof first, then the parapets, to achieve proper weathering?
What’s the name of that roll?
what about a flat roof? mine has no slope at all.
Just curious, why not the first Base sheet layer? In your other videos I see that you put a Base down and then the sticky second base layer before the cap sheet. I am going to do a mod bit roof just like this video with the self adhesive. Thanks so much for your info guys...you are going to save us lots of dough!
You missed it. That is when I go over gravel and tar roof
His base layer is SA. He already has a torch down roof.
What is the material name and where do I find it?
I agree with Steven Gee. Also, you should NEVER run ur base seams within a minimum of 8 inches from ur cap seams. He is pretty much right on top of the base seams. That ruins the whole point/value of having a 2 plied roof. Now it’s basically just really thick single plied roof. JOKE!
Absolutely never seem on seem. This is beyond a joke.
How much is it sir? I want to fix my house roof
Awesome !
I am in California where can I buy Karnak 81
appreciate ! your video very helpful. can you post the address or name of the company where you order those materials for doing this job.
ABC roofing supply or Beacon Building Supply