Raised Text Sign VCarve - Carbide Create
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- First time using Expanded PVC, and go over making a raised Text and VCarve Sign in Carbide Create with all features available in the free version.
This was all cut out on my LongMill, and got the feed up to 1,300mm per minute. I think it could go even faster, just need to experiment some more on speed and feeds.
SHOP THE NEW DEHAMMER STORE:
www.dehammermaker.com/shop-de...
YOU CAN GET THE NEW MK2 LONG MILL HERE (These are affiliate links that help support the channel and add nothing to the overall cost):
sienci.com/product/longmill-m...
GSENDER:
sienci.com/gsender/?ref=dehammer
TIME STAMPS:
00:58 - GETTING STARTED - CC VERSION
01:00 - SETUP
01:40 - DESIGN
02:06 - TEXT
03:00 GROUP VECTORS
03:26 - IMPORT SVG
03:57 - OFFSET VECTORS
04:26 - TOOLPATHS
04:42 - POCKET
05:33 - DESIGN FIX NODES
08:40 - VCARVE
09:54 - DESIGN FIX SPACING
10:33 - OFFSET VECTORS
11:30 - ALIGN TO CENTER
11:47 - SAVE G-CODE
12:50 - RETURN SPINDLE ROUTER TO HOME IN GCODE
13:48 - TIME LAPSE
14:29 - FINAL THOUGHTS
Music by Hawk vs Dove:
hawkvsdove.bandcamp.com/music
WHAT I USED:
SOFTWARE - CARBIDE CREATE (FREE):
carbide3d.com/carbidecreate/d...
SOFTWARE - CARBIDE CREATE (PRO):
carbide3d.com/carbidecreate/pro/
LONGMILL: (NEW MK2 VERSION)
sienci.com/product/longmill-mk2/
END MILL:
sienci.com/product/18-flat-en...
The Below Amazon Links are affiliate links and I may make a commission off of any items sold. This helps fund the channel and to keep making videos.
KOWOOD V BIT:
amzn.to/3AHpqJI
EXPANDED PVC BOARD:
amzn.to/3g7bqzs
ORAMASK:
amzn.to/3gbcpPi - แนวปฏิบัติและการใช้ชีวิต
Great tip for bit changing, Thanks
Your welcome!
Great tip on the X0.00 & Y0.00 I never knew that iv always lined it up manually on the second bit thanks!!
Thanks, it took me a bit to figure it out, but man does it make life easier.
Nice job and really like the way you explain things.
Thank You Tony!
Another great informative video,
I always come back to your vid’s when using carbide create, keep up the good work
Thank You!
Nice video DE, not a lot of Carbide Create vide out there ( I do miss Winston) so you get a new subscriber with this. Time to bulk watch some more of your history
Thank you! Yeah there are a some out there, but not a lot on recent versions.
Great video. Learned 2 new things today. Changing text to vector, although I'm not sure if it's in the free version. Will have to look. Also didnt know about adding x0.00 and y0.00 to rehome.
Thank You, the convert font to vector should be available in the free version.
I had an older version, so once I updated it, it was there. Thanks
@@D.E.Hammer shame Carbide 3D don't automatically add the return to zero at the end of their carve sequence in the Post Processor. Shame they also don't allow access to it to make personalised alterations!
In newer versions it maybe possible to add post code, have not looked into it as old habits die hard.
Great Video! Love anything Star Trek! I am new to CC and the newest release version 648 threw me a few curve-balls and now thanks to your video my questions are answered. I guess you painted the gold/silver on the sign after? Looks awesome!
Thank you, and I am the same when it comes to Trek. Yes the gold & silver were painted last. I painted the pvc board, then oramask, cut, then painted the different parts.
when you put Home position in the middle of the project in CARBIDE CREATE and saved the Gcode, when i open the project in Candle, will the home position will show in the middlle?