![DE Hammer](/img/default-banner.jpg)
- 157
- 422 236
DE Hammer
United States
เข้าร่วมเมื่อ 13 ต.ค. 2020
🛠️ Hey there! I'm all about making stuff and helping you on your own creative journey! Whether it's CNC wizardry with a router, CO2 laser, or 3d printing. I am here to explore the possibilities of the machines & software. 🔨
🌟 My go-to materials? Acrylic, especially when it's all lit up with LED magic. Add a dash of Star Trek, and you've got a good chunk of my projects right there! 🖖
❓ Got questions? Fire away! I firmly believe if you're wondering about it, someone else probably is too. And if I don't know the answer, I'll embark on a quest to find it for you!💡
💼 Psst... I've got a merchant shop full of designs inspired by all things CNC and Maker magic. Give it a peek to support the channel!
🔧 Just a humble hobbyist here, doing what I love for the fun of it. Never expected this wild ride, so massive thanks for all the love and support. Let's keep the Maker spirit alive! 🔥
Email: deepellumhammer@yahoo.com
🌟 My go-to materials? Acrylic, especially when it's all lit up with LED magic. Add a dash of Star Trek, and you've got a good chunk of my projects right there! 🖖
❓ Got questions? Fire away! I firmly believe if you're wondering about it, someone else probably is too. And if I don't know the answer, I'll embark on a quest to find it for you!💡
💼 Psst... I've got a merchant shop full of designs inspired by all things CNC and Maker magic. Give it a peek to support the channel!
🔧 Just a humble hobbyist here, doing what I love for the fun of it. Never expected this wild ride, so massive thanks for all the love and support. Let's keep the Maker spirit alive! 🔥
Email: deepellumhammer@yahoo.com
Setting up the Monport CW-5200 Water Chiller & Quick Disconnect for CO2 Laser
Join me in this detailed unboxing, setup, and review of the Monport CW-5200 Chiller, essential for maintaining the optimal performance of your CO2 laser. Watch as I walk you through each step, from unboxing to the final setup, including the addition of quick disconnects for easier maintenance. Discover how this chiller can elevate your laser engraving and cutting projects through precise temperature control.
🔧 What's Covered:
Unboxing the Monport CW-5200 Chiller.
Step-by-step setup instructions.
Installing quick disconnects for the chiller hoses.
First-hand review and operational insights.
👍 Why Watch?
Learn the critical importance of using a genuine chiller over a recirculator.
Discover the ease of installation with detailed guidance.
Find out how quick disconnects can simplify your workflow.
🛠️ Key Moments:
0:00 - Introduction and overview of the CW-5200 Chiller.
0:50 - Unboxing and initial impressions.
4:41 - Measuring and detailing the setup components.
9:17 - Installing and securing the hose connections.
23:38 - Final thoughts and operational tips.
🔗 Affiliate Links: Using the below affiliate links helps support the channel at no
additional cost to you!
CW-5200 WATER CHILLER:
monportlaser.com/products/6l-industrial-water-chiller-cw-5200?sca_ref=5935906.hD8Ee83EIi
QUICK CONNECT
amzn.to/4bxGhQY
USE DEHAMMER10 - TO GET 10% OFF YOUR PURCHASE
💡 Engage with Us:
Have questions or tips about setting up your chiller? Share your experiences in the comments below!
💖 Support the Channel:
Enjoy the video? Hit the like button and subscribe for more tutorials and reviews. Using the affiliate links in the video description supports the channel at no additional cost to you!
🔧 What's Covered:
Unboxing the Monport CW-5200 Chiller.
Step-by-step setup instructions.
Installing quick disconnects for the chiller hoses.
First-hand review and operational insights.
👍 Why Watch?
Learn the critical importance of using a genuine chiller over a recirculator.
Discover the ease of installation with detailed guidance.
Find out how quick disconnects can simplify your workflow.
🛠️ Key Moments:
0:00 - Introduction and overview of the CW-5200 Chiller.
0:50 - Unboxing and initial impressions.
4:41 - Measuring and detailing the setup components.
9:17 - Installing and securing the hose connections.
23:38 - Final thoughts and operational tips.
🔗 Affiliate Links: Using the below affiliate links helps support the channel at no
additional cost to you!
CW-5200 WATER CHILLER:
monportlaser.com/products/6l-industrial-water-chiller-cw-5200?sca_ref=5935906.hD8Ee83EIi
QUICK CONNECT
amzn.to/4bxGhQY
USE DEHAMMER10 - TO GET 10% OFF YOUR PURCHASE
💡 Engage with Us:
Have questions or tips about setting up your chiller? Share your experiences in the comments below!
💖 Support the Channel:
Enjoy the video? Hit the like button and subscribe for more tutorials and reviews. Using the affiliate links in the video description supports the channel at no additional cost to you!
มุมมอง: 150
วีดีโอ
Monport 80W CO2 Laser with Autofocus
มุมมอง 670หลายเดือนก่อน
Join me as I delve into the Monport 80W autofocus CO2 Laser. In this video, I take you through the uncrating and my initial impressions of this machine. Whether you're a hobbyist or a professional looking to enhance your laser cutting and engraving capabilities, this video provides my first thoughts, measurements, how to uncrate it, and some of its features. 🔧 What's Covered: Unboxing the Monpo...
Rejoining the 3D Printing World: Unboxing & Review of Bambu P1S | A Maker's Journey
มุมมอง 699หลายเดือนก่อน
Rejoining the 3D Printing World: Unboxing & Review of Bambu P1S | A Maker's Journey
Installing the SuperLong Board on CNC Router | Sienci Labs Upgrade Tutorial
มุมมอง 8142 หลายเดือนก่อน
Installing the SuperLong Board on CNC Router | Sienci Labs Upgrade Tutorial
Testing G-Code Senders on Raspberry Pi 5 for CNC Machines | LinuxCNC, UGS, CNCjs & More
มุมมอง 2.2K4 หลายเดือนก่อน
Testing G-Code Senders on Raspberry Pi 5 for CNC Machines | LinuxCNC, UGS, CNCjs & More
How to Export GCode from Carbide Create 7 Free Version
มุมมอง 1.5K4 หลายเดือนก่อน
How to Export GCode from Carbide Create 7 Free Version
Relief Carve - Star Trek Voyager - LED Sign #CNC #longmill
มุมมอง 8217 หลายเดือนก่อน
Relief Carve - Star Trek Voyager - LED Sign #CNC #longmill
PixelCNC - Canvas & Layers the Basics
มุมมอง 4667 หลายเดือนก่อน
PixelCNC - Canvas & Layers the Basics
3 Years of CNC Videos, What's the future looking like?
มุมมอง 5468 หลายเดือนก่อน
3 Years of CNC Videos, What's the future looking like?
Create 2.5d with this CAD/CAM! - PixelCNC Review
มุมมอง 1.7K9 หลายเดือนก่อน
Create 2.5d with this CAD/CAM! - PixelCNC Review
Carve a Photo CNC - Estlcam Halftone
มุมมอง 4.4K10 หลายเดือนก่อน
Carve a Photo CNC - Estlcam Halftone
Customize Your Valentines in Illustrator
มุมมอง 746ปีที่แล้ว
Customize Your Valentines in Illustrator
I got a CO2 Laser: OMTech 60W AF | A Comprehensive Overview
มุมมอง 18Kปีที่แล้ว
I got a CO2 Laser: OMTech 60W AF | A Comprehensive Overview
Make Stuff - Star Trek NEON FLEX LED SIGN - PART 1
มุมมอง 1.2Kปีที่แล้ว
Make Stuff - Star Trek NEON FLEX LED SIGN - PART 1
CUT STAMPS ON A CNC - Collaboration with CREATIVE ROB
มุมมอง 615ปีที่แล้ว
CUT STAMPS ON A CNC - Collaboration with CREATIVE ROB
Long Weekend Cutting = Resurface Spoilboard #shorts
มุมมอง 234ปีที่แล้ว
Long Weekend Cutting = Resurface Spoilboard #shorts
Make Stuff- I learned a Lot - Acrylic Mirror & CNC
มุมมอง 349ปีที่แล้ว
Make Stuff- I learned a Lot - Acrylic Mirror & CNC
CNC Acrylic: Essential Cutting & Etching Tips for the Longmill
มุมมอง 10Kปีที่แล้ว
CNC Acrylic: Essential Cutting & Etching Tips for the Longmill
Big Change to Carbide Create 7 Free Version! NO More GCode export. Plus some other new features.
มุมมอง 10Kปีที่แล้ว
Big Change to Carbide Create 7 Free Version! NO More GCode export. Plus some other new features.
Make Stuff- Build Up Your Design Skills - CNC Project
มุมมอง 551ปีที่แล้ว
Make Stuff- Build Up Your Design Skills - CNC Project
GRBL Settings for CNC: A Beginner's Guide | GSender and More
มุมมอง 8K2 ปีที่แล้ว
GRBL Settings for CNC: A Beginner's Guide | GSender and More
LongMill (MK1) - 1 Year Birthday - Overview and Maintenance - Upgrade to 48" MK2?
มุมมอง 7K2 ปีที่แล้ว
LongMill (MK1) - 1 Year Birthday - Overview and Maintenance - Upgrade to 48" MK2?
ORAMASK - Application & 2 Color Paint Job
มุมมอง 8K2 ปีที่แล้ว
ORAMASK - Application & 2 Color Paint Job
There's A Lot of Math - Carbide Create VCarve
มุมมอง 7422 ปีที่แล้ว
There's A Lot of Math - Carbide Create VCarve
Only problem is its only for windows, but I did get it ti run with crossover on Linux so it can run that way on a mach also. Since this isn't the first one I tried, I think this is the best. Thanks for the video. subscribed and will see what else you got Do you know why it makes 2 passes on some cuts even though the depth of my endmill is more than my cut depth, I had both the numbers the same and it still did 2 passes on some cuts. strange Get some good earth magnets, They'll keep that shut
Very nice, I can’t believe the supports in the first piece worked so well
Thanks, has taken some time to get those settings to that. Still room for improvement, but I'm happy.
Brilliant.
Nice job❤
Thank You!
Nice helmet bro. Great job on it.
Thank you, printing was the easy part, now putting it together and painting.
Great topic, thanks 👍
I like the filters. I have the non-chiller version and yours has lots more options
I like them, until i forget to clean them, lol.
My problem Monport is there sales dept and support. I bought and paid for a unit, and 30 days later it still hasn't ships. But for you, they ship it for free Sad
Thank you for reaching out, and sorry to hear about your experience. As a reviewer the one thing that is hard to test is the CS part. If you like to discuss this further, please send me an email. deepellumhammer@yahoo.com
Thank you, I will reach out.
Paul, very informative video. Nice that I don’t need to spend any money to learn all this stuff…lol. Looking forward to the pew pew part.
Thank you Paul. I'm looking forward to the pew pew part. Just have to have this weather stop messing things up.
Looking good brother. Now build a tall enough mobile stand that you can put that chiller underneath and have some material storage. Pew pew pew! 😃
Thank you. Yeah, going to have to build something for it, if it stays...
I want one
Well there goes me bragging about my K40...Thanks Paul!
The K40s are great lasers! They also have a much smaller footprint, which could be very beneficial in a crowded shop.
I'm currently thinking about integrating a pi5 with a 26" touch screen into my electronics cabinet for my cnc router. The router runs on FluidNC and I've been using CNCjs for testing and I've grown to like it.
I got CNCjs to run on my Pi 5. It was really simple, just follow the instructions. I forgot to enable the kiosk mode and redid the setup but it doesnt seem to have changed the setting so I'll probably just make a little script that on boot starts the browser in fullscreen mode at localhost/#/workspace. I also want to mount google drive as a storage medium so i can save files on my PC to the drive and load them from there on the RPi. I can also acces the CNCjs webinterface on my PC with the IP of the Raspberry as both are in the same network. Next up is testing if it works with my controller and then comes the monitor
Thanks for detail checking for Monport 80W laser ❤❤❤
Paul, good unboxing / uncrating video. The height does seem like it would be a problem if you are normal height or taller. Do they offer a leg set? Looking forward to the next video.
Thank You Paul! They do, but this is the one I was sent. It's all good, going to get some exercise in from all the squatting, haha.
Congrats Paul! I am looking forward to following this series. I bet you will get a stand build soon!
Thank you. Yes, i definitely need a stand if I'm going to continue to use this.
Pretty cool Stuff!
It looks pretty cool right now, we shall see how it goes once it's fired up.
Great video Paul. Congratulations on the new pew pew machine. I can't wait to see what you make with it. I'll be watching for your next video, "Building a stand for my new Monport Laser". 😃
Thanks Dave! If it stays in my shop, I will be building a stand, other wise my back will divorce me.
Thanks for the video. As you seem comfortable with Linux, as you have been using a Raspberry Pi, you might wish to install Linux on the Mini-PC you purchased, and then run the gSender-1.4.6-Linux-Intel-64Bit.AppImage (I run Debian Linux on an Intel PC and run gSender AppImage on that).
I might just do that.
How did you cure ringing?
I didn't just set the slicer to 0.16 and used matte black. The front of the drawers are the pei plate texture.
Keep up the amazing work!
Thank you, and I will.
The boyyyyy
Your daughter’s stuff turns out a lot better than my projects do.
LoL, hers are turning out better than mine.
Great job sir. I love the P1S. I know a guy that has some videos on Bambu Studio.
Thank you. I am going to have to watch them!
Sir my machine show's error 3 invailte statement and one other that's shows grbl (1.1h) for help.. Sir please help me my machine is not going to joging
Paul, success is yours!!
Nice job sir! Dedicated rotary for the old board?
Did not think of that my mind went a little more decorative and star trek, LOL. Who would have thought.
This is a great video DE! I like the LTT screwdriver too. Glad you got all the wiring sorted out with some reading and I hope you're liking the new board haha. I agree with your pain on 32-bit support, let me know if you have any other feedback on it 👍
Thank You. I am really enjoying the SLB. From the design to all the additional features. Just need time to dig deeper into it.
Theres a cam Addon for blender in development calle blendercam. I have made 2.5 carves just by taking my 3d object and scaling it flat and generating my tool path directly from the scaled model
Thanks dear sir💕💕💕 thanks
Sir i have a question thats all of port connected but I can't joging and running. There are showing probe fail. Another u r open a new chat that's dollar 3 setting. ods-open office.. I can't understand the formula. How can understand.. I'm new and helpless.. Please
$3 changes the axis direction $20 is soft limits $21 is hard limits $22 is homing cycle Try dialing 20,21,22 and see if you get the error.
This is great, thanks for making this video so I'll know how to hook it up before I get mine!! I appreciate this. So did the board come with any instructions or anything like that?
Thank you. No included instructions, but they have guides and pin outs online.
@@D.E.Hammer Ok, cool. Thanks.
@D.E.Hammer I think this is pretty funny; we spent all that time trying to get that remote controller to work on my machine, and now this board has a port for a pendant, that'll work even better!!! 😆😆 Now we just have to find out which, or what kind of pendant will work with it. 🤔
This is the best SLB video so far. Thank you for making it. I should be getting my SLB tomorrow or Tuesday. :)
Thank You. You are going to really like the SLB, Sienci really did a great job with it.
Nice setup.. What is that project beside u at looks like a playstation holder... Keep it up brother
It is a playstation stand. Wanted to work on that this weekend, but was kind of excited to get the slb set up.
How did you handle the dust?, i want to put this cnc in my room, i have no garage
You would want to build an enclosure. I'm not sure you want to run a vacuum with acrylic shavings. I'm pretty sure that's what killed my first shop vac. So you would need to sweep out the enclosure.
@@D.E.Hammer I'm planning on making DIY vacuum using washing machine pipe (flexible and small) and 12V fan, in the other end of pipe i'm going to attach it with the spindle, so it should suck the debris. I don't know how good it is but i'm gonna try that..
@@D.E.Hammer thanks for telling your experience about yout vacuum
Go Vikings. Great video. First time hearing about acrylic. Looks like it would be something fun to try. I too have a long mill--Great machine
Acrylic is fun. Just remember to start with cast acrylic. I love my longmill and just added the SLB to mine.
There breaching the shield!
Very AWESOME my friend...... Looking like she might be needing her own machines....
I am all for it.
Thank you for such great video 👏🏼👏🏼👏🏼😃
If it has gcode for NC Studio, then I will buy 2
Throwing Linuxcnc with gcode senders is a complete lack of understanding of Linuxcnc. The RPi5 as of now will only be useful with Ethernet or using the gpios. SPI is currently unsupported. Linuxcnc is far far more powerful than a gcode sender, as it is the cnc controller. It would have been helpful to state the difference between a gcode sender such as grbl and a cnc controller as linuxcnc.
Spi is supported with the remora project. Not every board is but most of the common btt 3d printer boards are
@@jamestennant3367 are you sure the RPi 5 is ? Just looked at Scott’s GitHub, the SPI driver is using the bcm2835 headers and that code is not for use with the RPi5. Unless of course there is a branch using the slower spidev interface or someone has got code going for the RPi5 natively rather than having to use the kernel driver.
Awesome!
This video helped me big time to start my own engraving projects, thank you very much! I have a question for you, I have my programs and for the engraving, most of the time it turns into a white pretty engraving, but some other times the engraving is just clear, no color. As it is the same programs and the same bits, what could be the reason for this to happen? Hope it makes sense for you.
Very impressive. You go girl!!
She is rocking it!
Great job!
She did a great job!
Well done DE Hammer, today i've resolved my issue...Full 64bits OS LAST version and CnCJs run very well...Very cool My cnc get bluetooth for running, colud you know how do to this with Rpi 400 ? Thank's a lot Phil
Hey there, sorry, I just saw your comment from yesterday, but see you got it going. I will have to look into the Bluetooth, as its been awhile.
Hello DE Hammer, i come back to you...I follow your video to install CnCJs but mine is RPI400....not " 4B" ...but my first blue screen don't have " N°A06 line", so i get only A00, A01, A02, A03, A04, A05, A07 .......i press " Enter" then after the second blue screen " CnCJs Pendants and Widgets" i press "enter " .....then the title CNCjs appears on Xfce Terminal(black) but i get an error message...this one Detected OS is NOT compatable with this install script............ I've ot the same error message last year but today i don't remember how to resolve this issue ..... Maybe do you have an idea ?? Thank's a lot Phil
That's so cute!!
Getting ready to push the BUY button for EstlCAM. Thanks for posting.
I'm sure Estlcam doesn't mind you saying etsl even if it does mean you are swapping the t and the s. E. T. S. L. not E. S. T. L.
Thanks 👍