CR Laurence Universal Window Install! Ram ProMaster Van Build Conversion - Episode 11 | Jason Klunk
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2024
- More windows?? More windows! In this video I go over how I installed the universal bunk windows from CR Laurence in my ProMaster. I bought these windows at the same I bought my sliding door window, but I was hesitant about installing them so I kept putting it off. I'm so glad I decided to put them in, they provide great air flow, and make the space seem bigger with the natural light. As always, measure 1000x and cut once!
I’ll be moving onto the ceiling next, so stay tuned. Yewwwwwwwww!
#vanbuild #vanconversion #rampromaster #campervan #crlaurence #windowinstall
CRL Bunk Window VW1033L (Driver side): amzn.to/3g9zQXq
CRL Bunk Window VW1033R (Passenger side): amzn.to/3hH4hVg
Makita Driver Drill: amzn.to/3ekL2jq
Bosch T118G Jigsaw Blades: amzn.to/39usgTg
Jigsaw: amzn.to/2RExiXc
Por 15 Top Coat Spray Paint: amzn.to/2wAWZ3H
Foam Brushes: amzn.to/2QYeF06
Simple Green Cleaner: amzn.to/2WylYz2
Dewalt Safety Goggles: amzn.to/2xsnNDo
Metal File: amzn.to/2V9h8Y7
Instagram: / jasonklunk
Epidemic Sound: www.epidemicso...
Tesla Referral: ts.la/jason55632
Main Camera (Sony A7III): amzn.to/36AVy1c
Main Lens (Sony 16-35mm Vario-Tessar T FE F4 ZA OSS): amzn.to/2P4fkeN
Manfrotto Tripod w/ Fluid Video Head: amzn.to/2MLyNjW
Rode VideoMic NTG Shotgun Mic: amzn.to/336tEe7
DJI RSC-2 Gimbal: amzn.to/3vtrEbU
Mavic Air Drone: amzn.to/2EdfGeK
GoPro Hero 7 Black: amzn.to/2GuBFA7
Lighting: amzn.to/2FiksIX
I am available for van build consultation calls if you have questions on your build. Find my email in my bio and send me a message: / @jasonklunk
Music by Qveen Herby - Mint - thmatc.co/?l=7...
As per the Amazon Operating Agreement, I am a participant in the Amazon Services LLC Associates Program. As an Amazon Associate, I earn from qualifying purchases. This is an affiliate advertising program designed to provide a means for this content to earn advertising fees and commissions by linking to Amazon.com and affiliated sites. This is at no cost to you, thanks for your support.
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
If you have the CR Laurence Universal windows, do you notice any water pooling in the bottom if you spray directly into the slider?
yes, its dumb
@@BeastModeNow lol, glad I’m not the only one then
Thanks so much for showing the removal of those support thingys...was sure about putting in the horizontal windows but that totally helps to see what's not anything to worry about...looking forward to more build videos from you young man excellent m.o. 👍
Glad it helped!
Awesome job bro! Helpful video! What windows are those and where did you order them?
Thanks. You can order them from amazon, links are in the description.
Sweet dude.....looking great! Good info all around. 👍
Thanks!
thanks for the video! about to install one of these this weekend
Noice, you got it!
thankyou for the info in the description. man i wish amazon had them in stock right now though :/
No worries. bummer, yeah I think stock is low everywhere right now
Thank you! I was trying to figure out if I need to remove the cross support or not.
Glad I could help
Are there any pull down shades for these windows. I have magnetic covers but they are hard put up with the bug screen on the door.
sick video mate x
thank you! 🤙
Windows look good
thanks
Great video, Jason! Do you happen to have a link for your sliding door window? Thanks!
I got mine from Panther RV, but it looks like they are out of stock.
Hey Jason, Love your vids pal, a lot of the work Ive done on my van (2019 Peugeot Boxer) have followed your methods so really appreciate your videos.. I have a question regards your CRLawrence window glass. CR Lawrence Australia are saying its discontinued as it doesn’t fit my van but the measurements appear to match exactly. Could I ask if you wouldn’t mind measuring your glass and letting me know what it is (in MM) as I’m desperate to get a window and really want one of these. Thank you mate.. Dave
Did you consider putting Buytle tape on the window as well - on the outside as an extra water layer defense?
You could do that, but it's not necessary or recommended by the manufacturer.
Question: can that slider window fit in the top portion above that divider line? I’m thinking I’d rather put one up there closer to the roof line in my kitchen area so light can hit my starter 🌱 s. Just wondering if there is enough clearance(?).
No, I don't think they will fit in that spot.
Two quick questions, [1] how exact / tight was your template trace and [2] did you use butyl tape to seal?
Your videos are perfect, thanks for sharing your build!
I see that the windows come in several different width sizes. May I ask which model you selected? Thanks much.
Whoops, I forgot to include that in the description. The links should be there now!
Love the video. Question for you though. How come you didn't install a window trim? I have been watching multiple videos and it seems that people are doing either on this.
What do you mean by window trim? I'm framing it out later when I panel the walls.
@@JasonKlunk its a wooden ring that goes inside the van that apparently helps it clamp inside
@@JasonKlunk so how is the clamp with just going into the sheet metal?
those don't help with the installation, it's purely cosmetic.
Jason, I am about to install two of these myself. Good work! I noticed you applying what looked like a Rust protection layer wonderful. Something I did not see was an application of any of the three products mentioned on the WARNING sticker of the window. Have you had any issues down the line? Especially from not applying a urethane adhesive or any kind of sealant? I just got done installing a maxairre fan using a lap sealant to keep water out, and now it feels strange to not apply any sort of sealant to these windows upon install. Your thoughts on this?
It was not recommended by the manufacturer when I installed them, that could have changed. Are you installing the same windows or a different brand? I haven’t had any issues and the van up-fitter that I know does not use any sealants either.
so, installing the windows, you don't need any butyl tape? you just pop the window in, then there's a frame gasket thing you put in from the inside?
Right, butyl tape wasn't recommended by the manufacturer for these windows.
Have you noticed any window rattle when you drive after install? I just installed a similar window and noticed that the walls rattle a little now when driving. Is this normal?
Hey, do you have any framing around it or anything yet? Or is it just the window in the sheet metal?
@@JasonKlunk it's not framed yet. I kinda thought that might be the case. Do you recommend bonding a window box frame to the sheet metal? I am planning on putting in the wall studs for other things but that wont help in this case I guess.
What was the little square hole in the center of the template for? Great video!!!
It's so that I could set the template onto the window and have it be completely flush. Otherwise, the handle for the slider gets in the way. For example, if you go to 2:57 and pause, I could set the template on the window while it's laying flat like that.
Jason, it seems that these windows have a leaking problem! Do you agree?
I’m planning an installation by professionals installer. What is the part number of the window ? The dimension?
VW1033L and VW1033R
Those windows don’t open up all the way do they? Like if I have a dog a d he wants to pop his head out?
You can pop the screen out pretty easily if you want them to.
Hi Jason. Thanks for this video. I have the same windows and I am planning to install them soon. I saw 2 other videos where they mentioned that not all of the screw holes were predrilled, but you didn't seem to have an issue. I am a little confused by this step. Did you just drill right through the frame and the van together?
Hey - I actually mention this at the end of my video as well. You should definitely pre-drill the holes or you'll risk stripping the screws.
oh man, i almost installed the window upside down because the manufacturers sticker was on upside down! I noticed the wheep holes were on top and came here to double check that i had it wrong :)
nice catch!
We’ve been loving your videos! Super helpful. Did you use 2 driver’s side windows or did you purchase the specific passenger side? We can’t find the passenger version anywhere and wondering if 2 drivers side would work.
Anna Stine thanks! Don’t use two drivers side windows, the slider will be going the wrong direction. Google VW1033R, there are a few places to order from.