No, nothing at all. I thought it was going to fix my gas problem, but it didnt change a thing. the fuel injectors were good from the get go. i took them off for no reason lol Im guessing it might be a gasket problem to the head or intake or exhaust manifold. Each spark plug looks very good so it doesnt like anything is wrong with the internals. So i need to replace something thats bolted around the engine or might need the gaskets replaced.
another easier way to find out why you have bad gas mileage without costing any money is to find out if you are running rich or lean, a scan tool can tell you by viewing the fuel trim level. You can rent one for free at any autozone. Once you've figured out if it is running lean or rich you can narrow down your mileage problem. o2 sensor data can also help
Missed some steps there. You’re supposed to pulse the injectors while there in the ultrasonic cleaner. Also those injectors should be atomizing the fuel instead of looking like two streams of liquid shooting out. Maybe you’re pressure is low.
no not with these. What gave me better fuel economy was taking off the throttle body and cleaning the black carbon gunk off the throttle body and then cleaning the inside of the intake manifold. Once i cleaned the throttle body and the port of the intake manifold, I replaced everything back together and started the engine and the response to the gas pedal was real precise. The acceleration was incredible, it felt like a brand new car and it is a 1995. The gas mileage increased substantially. it was very revealing. I also did it to a 2005 nissan altima and it did the same thing too. if you have any vehicle thats old, you should give that throttle body a clean and watch your gas mileage increase hands down.
yeeeah ultra sonic cleaners!! some one was asking what the cleaner was. I think its like a pressurized cleaner or something. harbor frieght should sell something like that for sure. thanks for the comment
He is clearly saying IMPEDANCE. Run a bottle of cleaner thru your ears. Move some of the wax build up. Fuck im Australian and i can hear it thru his accent,
in the video, it clearly ran threw an injector cleaner. meaning it got cleaned on the inside and on the outside. it also got placed in an ultra sonic cleaner as well which cleans with pressure. so your dumb. who knows what the fuck you see with your eyes lol
Actual he is right , you run a pulse while in the ultrasonic and it back flows all the gunk that is inside the injector. All that did was clean the outside and maybe the tip of the injector. You also don't fully submerged injector in the ultrasonic.
Just Eat gonzalo cruz has a point, if they weren't pulsed while in the ultrasonic leaning fluid then they still may have microscopic amounts of gum/varnish in between the solenoid needle and nozzle. They flowed equal because the tips were cleaned but they may well flow more volume if it was spotless internally and then maybe you'd see a drop in fuel consumption. It's like a dirty restricted air/fuel filter that makes fuel consumption go higher until replaced. If they didn't pulse them and only did what was filmed then they're cowboys and you've just got scammed
Gonzalo Cruz who said anything about reverse flushing. I just got them cleaned that's all. it was placed in an ultra sonic cleaner, there's no need for a reverse flushing. the ultra sonic uses high pressure to clean the injectors
nah. haha i dont know anything what the hell he was saying at that time. lol that was years ago. i had a totally different mind frame then haha I seemed a bit shy in the video it looked like
very good master
yes sen-se'
Cool vid.👍
Andy Laye thanks
Amazing !
Very interesting! Thanks for the video!
What this about the factory coating inside the throttle body , Dose it come off if we use throttle body cleaner... Thanks.
Very good. Very helpful thank you
Wowww..
Im glad you enjoyed it :)
Thanks for the video. Did you notice any difference in your fuel economy after they were cleaned?
No, nothing at all. I thought it was going to fix my gas problem, but it didnt change a thing. the fuel injectors were good from the get go. i took them off for no reason lol Im guessing it might be a gasket problem to the head or intake or exhaust manifold. Each spark plug looks very good so it doesnt like anything is wrong with the internals. So i need to replace something thats bolted around the engine or might need the gaskets replaced.
check your pcv valve and throttle body
wow, thank you. Ill check that out tomorrow. thanks
another easier way to find out why you have bad gas mileage without costing any money is to find out if you are running rich or lean, a scan tool can tell you by viewing the fuel trim level. You can rent one for free at any autozone. Once you've figured out if it is running lean or rich you can narrow down your mileage problem. o2 sensor data can also help
Thanks for that. Unfortunately in Australia you can't hire scan tools 😀 most place charge about $110 for a scan report
Super cool votre vidéo.
Missed some steps there. You’re supposed to pulse the injectors while there in the ultrasonic cleaner. Also those injectors should be atomizing the fuel instead of looking like two streams of liquid shooting out. Maybe you’re pressure is low.
Denso injectors ? good stuff ..
Did you notice any improvement if fuel economy?
no not with these. What gave me better fuel economy was taking off the throttle body and cleaning the black carbon gunk off the throttle body and then cleaning the inside of the intake manifold. Once i cleaned the throttle body and the port of the intake manifold, I replaced everything back together and started the engine and the response to the gas pedal was real precise. The acceleration was incredible, it felt like a brand new car and it is a 1995. The gas mileage increased substantially. it was very revealing. I also did it to a 2005 nissan altima and it did the same thing too. if you have any vehicle thats old, you should give that throttle body a clean and watch your gas mileage increase hands down.
Thanks Just Eat I'm going to try that!
Where do I find a place to clean my injectors after I've already removed them?
shoot, i have no idea. you might want to ask google that
I have but it's too vague- everyone just hooks shit to the fuel rails, can't find anywhere that does ultrasonic.
I'll keep looking
DRTMaverick try Google mapping diesel injection or try asking a pep boys or local known performance shop
Just pop them in the dishwasher
what liquid did you use for the sonic tank? thank you
I dont know. i should of asked
that would be great to know
the impotence is good hehe
haha
Habor Frieght..ultra sonic
yeeeah ultra sonic cleaners!! some one was asking what the cleaner was. I think its like a pressurized cleaner or something. harbor frieght should sell something like that for sure. thanks for the comment
impedance bro, not impotence. research "resistance"
lol yeah. everybodies thinkin he meant impotence haha
No, not me. I understood he meant impedance he just mispronounced it.
Was that water being sprayed by the nozzles ?
some kind of solution. definitely not water
Thanks. I would really like to know what that liquid was.
Ohh I laughed so hard on the impotence word 😀
hahaha
How many people on TH-cam have that machine hoorah not I said the captain
I don’t have it either. I drove 40miles to get that shit done for free cuz a friend of mine works at that auto shop.
He is clearly saying IMPEDANCE. Run a bottle of cleaner thru your ears. Move some of the wax build up.
Fuck im Australian and i can hear it thru his accent,
haha
you missed a bunch of steps.. you only cleaned the outside.. lame!
in the video, it clearly ran threw an injector cleaner. meaning it got cleaned on the inside and on the outside. it also got placed in an ultra sonic cleaner as well which cleans with pressure. so your dumb. who knows what the fuck you see with your eyes lol
Actual he is right , you run a pulse while in the ultrasonic and it back flows all the gunk that is inside the injector. All that did was clean the outside and maybe the tip of the injector. You also don't fully submerged injector in the ultrasonic.
Just Eat gonzalo cruz has a point, if they weren't pulsed while in the ultrasonic leaning fluid then they still may have microscopic amounts of gum/varnish in between the solenoid needle and nozzle. They flowed equal because the tips were cleaned but they may well flow more volume if it was spotless internally and then maybe you'd see a drop in fuel consumption. It's like a dirty restricted air/fuel filter that makes fuel consumption go higher until replaced. If they didn't pulse them and only did what was filmed then they're cowboys and you've just got scammed
do that with a design iii. that's shit you did is not reverse flushing. yes it cleaned it but its not reverse flushing.
Gonzalo Cruz who said anything about reverse flushing. I just got them cleaned that's all. it was placed in an ultra sonic cleaner, there's no need for a reverse flushing. the ultra sonic uses high pressure to clean the injectors
I bet you that cost a lot of money
Nah, my friend did it for free. That was free
Impotence...Jesus. Great video but you don't understand fundamentals of the language or electronics.
nah. haha i dont know anything what the hell he was saying at that time. lol that was years ago. i had a totally different mind frame then haha I seemed a bit shy in the video it looked like
Dude he is clearly saying impedance. Clean yr ears.
Lame!
thanks