Man I can’t thank you enough!!! I was going crazy trying to figure out why my car wasn’t detecting my key fob. I replaced the battery and that didn’t fix the problem. So a guy recommended that I reprogram the remote key. I bought a new one and tried to reprogram both remotes using your video and it worked for the new key and not the old one. So it was a problem with my old key fob all along. And your video 100% helped solve my problem. Now I don’t have to manually unlock and start my car any more. Thanks a million!
Thank you so much for the video 🙏🏽 ‼️‼️After programming all functions worked accept for remote start. So I held the near the push start button & held the lock button down for 3secs & the remote start works!!‼️‼️
Great video, did mine yesterday and some of the features worked,remote start,lock unlock from new remote worked,car would only start with new fob in console fob holder and the keyless lock/unlock from door handle not working,gonna try programming again,nevermore good job👍
This was very helpful. I noticed doing my 219 if you all the fobs present you can skip the timer segments and go right to the next fob to be programmed. Under 2 mins.
Great video, but what I learned was, I had bought spare keys before and my 2015 Impala knew that. When I went into program mode the car said key number 4 ready. So I programmed 2 new key fobs in 3 mins. I didn't have to wait the 10 mins between programming because the car had made keys for me in the past.
I'm confused about the key u put into the door lock.....so when do u remove the key from the door lock or do u keep it in until all the key fobs are programmes
Do you need to program the first remote ? My unlock button is broken and I won’t be able to do that step with my old key . I have a 2018 impala push start
PLEASE READ to exit the pairing mode Hold the engine / Stop button If not the screens will go black and you’ll think you did something wrong an the car won’t start
I brought two key fobs from Amazon but they didn't hv proximity. Found this out after I used your video. Everything works but I can't turn on without key being in the transmitter.
i did everything and after “ready for remote one” when i took out the key the unlock button didn’t work so you think maybe the battery is dead i used it all the time but i always have to put it in the middle console
@@AS-pr4ww Mine doesn't go into learning mode. It just says the key fob Numbers then programs a new one after I push the start button. Maybe I have to reach the maximum fobs first. On a 2014 impala ltz that conforms to regulations: 2015 FFV.
Did this in under 10 minutes on a 2019 impala. Held the brake down , then pushed the start button 5 times. It said ready for remote 1 then I did the second one. After that I held the start button for 12 seconds then it started with the new key
Thank you. Great video and You just saved me $300 for not having to go to the dealer.
THANK YOU! This is the ONLY video I could find for push-button ignitions and it worked like a charm after my keys were stolen.
Man I can’t thank you enough!!! I was going crazy trying to figure out why my car wasn’t detecting my key fob. I replaced the battery and that didn’t fix the problem. So a guy recommended that I reprogram the remote key. I bought a new one and tried to reprogram both remotes using your video and it worked for the new key and not the old one. So it was a problem with my old key fob all along. And your video 100% helped solve my problem. Now I don’t have to manually unlock and start my car any more. Thanks a million!
Thank you soooooo much!!!! They were trying to charge me $170+ at the dealership to do this. So grateful to have found this and I did it myself!
Thank you this video just saved me $400 dollars in my home town Louisiana
Thank you so much for the video 🙏🏽
‼️‼️After programming all functions worked accept for remote start. So I held the near the push start button & held the lock button down for 3secs & the remote start works!!‼️‼️
Absolutely works great. Thanks so much. Saved me about 160 bucks🎉
Great video, the only video I found that actually worked.
Great video, did mine yesterday and some of the features worked,remote start,lock unlock from new remote worked,car would only start with new fob in console fob holder and the keyless lock/unlock from door handle not working,gonna try programming again,nevermore good job👍
Check if the key you bought have proximity sensor. If it doesn't then that is the incorrect key. That one is for vehicles without push start
Makes sense,thanks for your help.
Where did you get the remote for your car
Wanna say ebay or Amazon
@@AS-pr4wwwheres the link for the keyfob?
Thanks a lot for your video! It worked great. The manual wasn't as clear as you are when making the programming...
Thanks, saved me some money. Great instructions.
Thanks for this video. Just made an appointment at my local chevy dealer they want $140.00 gonna go outside and try this.
I gotta know…did it work 👀
@@ClariaHeslop-bd4dryes !!! Thank goodness for this man It work I was late for work but grateful
This was very helpful. I noticed doing my 219 if you all the fobs present you can skip the timer segments and go right to the next fob to be programmed. Under 2 mins.
How u do that
Just did mines bro i owe you💯🔥🔥thx so much
Thank you for the video , it worked!! It did put me in anti theft mode, which locked me out. After car set for 10 minutes, it reset
Same here just glad it worked
How to do this if I don't have push start?
How did you take it out of theft mode?? 2020 impala is stuff on that …
Thank You!!!! Worked like a charm
This worked for my 2013 Buick lacrosse premium-push start
Great video, but what I learned was, I had bought spare keys before and my 2015 Impala knew that. When I went into program mode the car said key number 4 ready. So I programmed 2 new key fobs in 3 mins. I didn't have to wait the 10 mins between programming because the car had made keys for me in the past.
I'm confused about the key u put into the door lock.....so when do u remove the key from the door lock or do u keep it in until all the key fobs are programmes
What did you mean by the bottons facing the back of the vehicle
If I bought a new key fob as a spare key, do I have to reprogram also the current one?
wow thanks! I had no idea the keyhole was hidden under there. great tip!
Yea just found out they started doing that to the cars with no key hole, it’s always going to be on the driver door on these newer cars
do you have to put the already programmed key in 1st or I can just go ahead and put the new one in
I currently messed up and put the new one in , now the car doesn’t ready the original
What have you done ? How did you fixed it?
Do you have to have the door open when you turn the key the five times? Also, do you step on the brake when prompted to push the start button?
Best to leave it open for easier access to the inside of the car, and no don't press the brake. Just press the button
Thanks bro! It worked like a charm!
After turning the key 5 times to get it into program mode did you take it out of the door right away or leave it in?
You can take it out
Excellent video ty
Broooooo thank you soo much!!!! you save a lot of money
Great tutorial TU
Very good thankyou !
Does this work without push start?
Saved money right here!!!
I only have one fob , so what do I do when I don’t have the second one ?
Do I have to have the new key cut before I program it?
That is all a preference. You don't have to.
Can you do it at all without the old key fob ? I lost mine and I got another one but it doesn’t turn
So u need the old key to get it into program mode?
You The Goat💪🏾🐐
I must have done something wrong. Can't get my original factory key to work. Starting over isn't working. What should I do?
Did you ever figure it out
Do you need to program the first remote ? My unlock button is broken and I won’t be able to do that step with my old key . I have a 2018 impala push start
No you dont
PLEASE READ
to exit the pairing mode Hold the engine / Stop button
If not the screens will go black and you’ll think you did something wrong an the car won’t start
This happened to me how can I fix this ?
@@UKNOWWAYNE.7 hold the push to start button or mash it till the cars screen comes back on it'll say exiting pair mode or continuing pair mode
It’s not working think the battery died nothing is working
So everything worked even auto start but in order for the car to crank all the way it has to be in the tramsmitter any suggestions?
Did u ever figure it out
No, I haven't
@@shervongrier2922 okay , i did lol
how did you do?
I would gladly take the help
Thank brother yogur video help me a lot
Thank you again works hundred percent but you will need the old one n the new remotes ....put the one not working in first n than new one....
Do you have instructions for push button start with 1 working remote?
Same thing
@@tayshab80 Not the same process.
Where’s the Amazon link? I need it ASAP
You are amazing !!!
Does this written for vehicles without the push button start?
My key works but my buttons don’t
Are you leaving the key in the key hole
I lost my key fob so I can order one from Amazon n program it myself? 2020 impala
Do you have the link to where you bought the keys from
The one I bought is not available but make sure it says proximity sensor when buying
Can you send the link of what remote you got or we can get if we have remote start or not, from amazon
Thank you it worked
I brought two key fobs from Amazon but they didn't hv proximity. Found this out after I used your video. Everything works but I can't turn on without key being in the transmitter.
Since it was amazon you can always return it and get the ones with proximity.
did he ever take the key out of the door?
Tanks 🎉🎉
What if you don’t have a power button and it’s a turn key start
Car does not go into program mode after to turn key 5 times. Am I doing something wrong?
What if you dont have any of the original keys… just ordered one from amazon
Does anyone have the link for the key?
i did everything and after “ready for remote one” when i took out the key the unlock button didn’t work so you think maybe the battery is dead i used it all the time but i always have to put it in the middle console
How can u press the start/stop button when u don't have it
I did everything you did and now my theft deterrent won't go off and the car won't stay connected to the new key
Car still wont start unless key is in That pocket any help
Don't receive the massage
" REMOTE LEARN PENDING, PLEASE WAIT."
After move the Kay 5 times
?
I get to the 2nd remote and when I hit the unlock button it won't do anything.
What happen if the unlock button don’t work
When I turn the key five times the dash does not come on to tell me anything?
My car completely shut off and won’t start or do anything help !!
If u did all the steps and your car won’t do anything it’s still in program mode u have to hold the start/stop button for 12 Mississippi seconds
That take the car out of program mode
Does it erase the original fob?
This method will erase the original fob so you will have to program both as stated in the video.
@@AS-pr4ww Mine doesn't go into learning mode. It just says the key fob Numbers then programs a new one after I push the start button. Maybe I have to reach the maximum fobs first. On a 2014 impala ltz that conforms to regulations: 2015 FFV.
Preciate it..
Good job
Did this in under 10 minutes on a 2019 impala. Held the brake down , then pushed the start button 5 times. It said ready for remote 1 then I did the second one. After that I held the start button for 12 seconds then it started with the new key
How did you hold down the brake and hit the start button 5 time. The vehicle starts and turn off, start turn off and repeat. Did you miss a step?
Did you figure it out?
@alonzorichardson6961 unprogrammed key remember it won't start . Gotta go through those steps before it will work correctly
So did u place the key in the door at anytime,or bypassed that step all together???
My display stayed off most of the time even if i opened and closed the door
My car us 2014 Impela made in Canada & this method didn’t work
The dang dealer wanted $160 to program the remote, thats more than the remote cost!
Hi I don't see the link for the key fob with the proximity.
My car won’t start after programming
I just did this now my car won’t even crank 😭
I would need more information in order to help. Did you try repeating the steps?
Mines doing the same right now
On the new 2018 up need 2 keys in system
Think you a million key fob is working fine thanks again.....
🚘🔑
All the videos on this is wrong I’m just going to go to the dealer and pay full price because NO video on TH-cam is accurate
This didn’t work for me at all
My car not coming on lmao cause internet Ryan prove something
Do you have to push the unlock button after programming the old fob? My old one doesn’t work