My suggestion for that would be to purchase and F1 car and use slick tires. Make sure you use them on a straight so both the front and back tires go over them.
I just put a stack in a wooden drawer, the weight of other cards and put a tape measure on the top to add some more weight. Works great. Did it with all my base set, fossil, and jungle set
That's probably why they are called "Car-d's", cause you can just drive over them with your car to flatten them. Also finally someone found a use for books.
I stored a Pokémon card in a perfect sleeve in a one touch 35pt case. Just for the helluva it. After months during the winter, i decided to reorganize my tcg and took that same card out of the case and it curved tremendously!
OK so I suffered the same issue as you, with holos curling backwards like that. You are right that its because of humidity, but humidity can go both ways Too much humidity and foils will curl forward Too little humidity and foils will curl backwards, like yours/mine. Out of the two, too little humidity is easier to fix. I bought 65% bovea humidity packs from a cigar shop (1 is like 5-8$) and put my card in a small sealed container with the card and checked on it every 12 hrs. After a day or two it was completely flat. I got a humidifier where I keep my cards and bought a humidity meter to track the levels and as it went up, after a week I saw a bunch of cards in the room flattening. There are vids of people putting cards in cigar humidors to increase the humidity, but all this only works if your holos are curled backwards like in the vid, this means there is too little humidity
I'll try the opposite method for the too much humidity. I live in a location where I have 80% or 70% humidity pretty often in my flat. And all my cards are bending, it's making me mad. Even those in double sleeve + top loader or binder are not safe on long term. My silica gel are saturated after few hours. So first of all I plan to buy an hermetic box where I could throw every pokemon card stuff. And to fix the forward curl, I'll try to put a card in an hermetic little box with a silica gel. Maybe the silica gel will absorb the moisture from the card and then the card will be flat like yours. Opposite method for the opposite issue.
@@noedesmons9978 I 100% relate, especially getting mad. I have the same problem with high humidity and the best idea i came up with is to put a given amount of cards into a deck box with some silica gel packs in it (some deck boxes are sold with a silica gel pack included indeed). I wonder how many packs are needed and how long does it take to get the result, assuming it works...
I bought 151 at release and my cards were bowed forward like this straight out the pack, good to know the bowing will not affect the grade and you can flatten yourself with some weight. WIll be more careful where I am buying in future I got from a large retail store they probably didn't store them very well (cold warehouse, outside, back of vans etc.)
You can massage it with your hands and use a soft boom , first put the card in a sleeve and top load and put the book on it and lightly presss you have to do it a few times but it will help out a lot sometimes cards get curved being in binders for a while
It's probably warping because of the way its stored. I have mine in an ETB and a stack of them were leaning because of the extra space inside which is why it curved.
Helpful video…I just wish there was someway to almost guarantee no warping by a new method of production for the cards, but also bindering them right away is good too (wish top loader binders were almost the same size as regular binders,same with top loaders)
Try living in the south south when there is always high humidity. It really sucks cause when you go buy these cards they already bending even from the store brand new.
I just found a few sleeved holos in my climate controlled storage unit, and I noticed they had a curve to them. I couldn’t remember if I left them that way. Thankfully I have my heavy hitters in a sleeve/ top loader combo. Glad to know they are safe! Thanks for the info!
You all are wrong. Put the foils in between the non-foil cards like energies. Then place them in a non-plastic deck box(laying flat down, not sideways) and store in a dry spot like a closet. You can also place a Damp Rid container in the closet for more efficiency. Wait two weeks to a month and your cards are back to normal.Truth is, the regular cards helps keep the foils from absorbing moisture. People just keep the foils separate from the rest of the deck most of the time. You can thank me anytime you want.
Harbor freight sells these C clamps for like 2 bucks with large rubber pads, ive used the book method and clamped the book down with the C clamps to add weight
Would it be a good idea to place a blank sheet of printer paper in front and behind the card before closing the book? Because the book's pages are already saturated with heavy inks, so it should theoretically allow for any excess moisture to transfer over to the blank printer paper.
Maybe you can buy plain white construction paper (thicker..maybe it’ll add more weight) and fold a piece in half (cut it smaller) , or use a sleeve? Some of my cards have gotten stuck on the sleeves for some reason (were open and put in sleeves right away)
Hey is there a specific way to put the card in a book because my mega Rayquaza has a small Bend and i want to fix it but im scared its going to get torn up and won't be worth anything anymore 😬
The only cards that have wrapped are the holo’s to the Deoxys EX release set. I have zero idea why but now I have to go flatten them out with a book lol.
I have experience cards being bent when I get them. (Yu-Gi-Oh mostly, but sometimes Pokémon) The promo holos are the worse at this. Though I do have ringed binders that might be doing this as well. Like I restarted collecting after 20 years, and back then my storage was like the box they came in or a crayon box. Though now I do have tins, binders, and deck boxes.
Do curves really not affect the grade a bunch of cards I been pulling have slight curves to them right out the pack and I've been a little uneasy about it
After so many yrs of collecting cards, I have card curve/bow issue. They were fine til semi recently. Whatever caused it seems to have only affected the holofoil or as I call them 40/60 & 60/40s and up (V, Vmax, Full arts, etc). And 98% of ones that got affected were not left out. I had them in elite trainer boxes, white card storing things get at card shop, etc. They were in a room thats room temperature is usually between 65 to 75 but usually 71 to 74. I didn't have them exposed to direct sunlight, there was no flooding, didn't spill water on them, etc. Sadly, I didn't know they curved/bowed til last weekish. Would laying them between books really work? Or getting a dehumidifier? The cards dont feel wet, moist, damp, etc they just are bowing to varying degree.
Some of mine that are in boxes in a drawer still manage to absorb moisture through the air and warp. Yes, carefully using the book method should fix the issue
My personal steps are 1: sleeve it 2: put in in a bigger plastic sleeve 3: put that sucker under a Bible and other cards (the Bible is big and won't move it around a lot of bumped) 4: forget about it for a few months 5: wow look a card!
If you use a standard binder with pages make sure it is a D ring not and O ring and don't overfill (to many pages) because the top pages will bend them inside the binder. Also, is that really true grading companies don't care about the curve?
I find if you do the book method, leave it alone! People keep checking it to see if it works, and it doesn't becaue it takes time, give it two weeks to a month and then check it.
I did this with foil Magic cards. Unfortunately after several days of being inside a book with a lot of weight, it remained as pringly as ever once i took them out. :(
@@sleevenocardbehind perhaps its cuz I live in a basement apartment, even if they're in the book the humidity won't let them uncurl. A friend of mine told me to put them in a sealed container with desiccant packets...
He's gonna supply me with one desiccant pack tonight 😅 I also thought maybe rice would work too. (Obviously putting it in a sleeve to not have it all scratched up)
Ok I I bought this desiccant thing from Walmart. It’s a big puck shaped thing and it sucks all the moisture out of the air. I put a bunch of cards in an air tight container and put this in it and it helped a bit
the reason the blow dryer doesn't work is that your cards have less humidity than the humidity of the location of where it was made. So trying to use a blow dryer to heat it up actually makes it worse!
and it's not always the humidity! it could just be heat (cold) expanding (contracting) the more metalic foil part! it's actually just very simple thermal stuff
@@sleevenocardbehind You messed up the narration audio, it's not in stereo, when u watch the vid with headphones the narration audio comes only from the left earbud
I've heard of this but it's never happened to me. Are you certain its the sleeves and not the humidity? Are all your cards bending in the sleeves or just the holo cards?
Man I was thinking some of my cards were a lost causes. Thank you for this video
I'll pass. I find it more effective driving over them with my car.
Aw hell nah💀💀
Use low profile tyres.
My suggestion for that would be to purchase and F1 car and use slick tires. Make sure you use them on a straight so both the front and back tires go over them.
🤣🤣🤣🤣
Honestly if they're sleeved well it probably would work
I just put a stack in a wooden drawer, the weight of other cards and put a tape measure on the top to add some more weight. Works great. Did it with all my base set, fossil, and jungle set
great vid bro! loved it! The way you explained everything down to how you show the process, i see potential!
Thank you so much
That's probably why they are called "Car-d's", cause you can just drive over them with your car to flatten them. Also finally someone found a use for books.
💀
Or because it’s in the shape of a car, 4 sides, a-b-c-D, so car-D
Thats not even funny bruv
I knew there was a reason I kept my university textbooks from 2005
you made a refreshingly polished youtube Video, no bullshit just straight to the point, keep it up buddy
I stored a Pokémon card in a perfect sleeve in a one touch 35pt case. Just for the helluva it. After months during the winter, i decided to reorganize my tcg and took that same card out of the case and it curved tremendously!
my left ear rlly enjoying this video
OK so I suffered the same issue as you, with holos curling backwards like that. You are right that its because of humidity, but humidity can go both ways
Too much humidity and foils will curl forward
Too little humidity and foils will curl backwards, like yours/mine.
Out of the two, too little humidity is easier to fix. I bought 65% bovea humidity packs from a cigar shop (1 is like 5-8$) and put my card in a small sealed container with the card and checked on it every 12 hrs.
After a day or two it was completely flat.
I got a humidifier where I keep my cards and bought a humidity meter to track the levels and as it went up, after a week I saw a bunch of cards in the room flattening.
There are vids of people putting cards in cigar humidors to increase the humidity, but all this only works if your holos are curled backwards like in the vid, this means there is too little humidity
Another vid for example th-cam.com/video/MkdNZcY90jI/w-d-xo.html
Ugh thanks now I need to make a new video lol great info
This comment should definitely be pinned or something 😂 super helpful and insightful stuff thanks to the both of you 😊
I'll try the opposite method for the too much humidity. I live in a location where I have 80% or 70% humidity pretty often in my flat. And all my cards are bending, it's making me mad. Even those in double sleeve + top loader or binder are not safe on long term. My silica gel are saturated after few hours. So first of all I plan to buy an hermetic box where I could throw every pokemon card stuff. And to fix the forward curl, I'll try to put a card in an hermetic little box with a silica gel. Maybe the silica gel will absorb the moisture from the card and then the card will be flat like yours. Opposite method for the opposite issue.
@@noedesmons9978 I 100% relate, especially getting mad. I have the same problem with high humidity and the best idea i came up with is to put a given amount of cards into a deck box with some silica gel packs in it (some deck boxes are sold with a silica gel pack included indeed). I wonder how many packs are needed and how long does it take to get the result, assuming it works...
I bought 151 at release and my cards were bowed forward like this straight out the pack, good to know the bowing will not affect the grade and you can flatten yourself with some weight. WIll be more careful where I am buying in future I got from a large retail store they probably didn't store them very well (cold warehouse, outside, back of vans etc.)
Same here,target had some for like $7 just ripped off and got warped cards lol, never again from target
1:20
The EXACT information I came to find out. Thank you so much lol. Saved me a LOT of time.
You can massage it with your hands and use a soft boom , first put the card in a sleeve and top load and put the book on it and lightly presss you have to do it a few times but it will help out a lot sometimes cards get curved being in binders for a while
nice thanks for the tip, btw your commentary audio is only on the left send just so you know, keep up the good work friend
This was one of my first videos and I exported the audio wrong! Thanks for watching and thanks for the feedback
I got stacks of bulk that’s warped 😢
It's probably warping because of the way its stored. I have mine in an ETB and a stack of them were leaning because of the extra space inside which is why it curved.
Best advice I've seen about this.
Dehumidifier if you're in the South. Problem is they can curve/bend for different reasons and a book isn't going to help the humidity.
Glad I have a huge Hi-SET book, time to fix past mistakes of my Gold Star Rayquaza. Wish me luck on my journey of restoring it.
🫡 best of luck!
Helpful video…I just wish there was someway to almost guarantee no warping by a new method of production for the cards, but also bindering them right away is good too (wish top loader binders were almost the same size as regular binders,same with top loaders)
Thanks for the video, short and to the point and solid delivery!
I put a card in a sleeve then I asked my mother in law to step on it. It worked
Except it is now a jumbo sized card
Try living in the south south when there is always high humidity. It really sucks cause when you go buy these cards they already bending even from the store brand new.
I just found a few sleeved holos in my climate controlled storage unit, and I noticed they had a curve to them. I couldn’t remember if I left them that way. Thankfully I have my heavy hitters in a sleeve/ top loader combo. Glad to know they are safe! Thanks for the info!
Using silica gel is also a very effective preventive method.
You all are wrong. Put the foils in between the non-foil cards like energies. Then place them in a non-plastic deck box(laying flat down, not sideways) and store in a dry spot like a closet. You can also place a Damp Rid container in the closet for more efficiency. Wait two weeks to a month and your cards are back to normal.Truth is, the regular cards helps keep the foils from absorbing moisture. People just keep the foils separate from the rest of the deck most of the time. You can thank me anytime you want.
Will try this. Thanks!
Harbor freight sells these C clamps for like 2 bucks with large rubber pads, ive used the book method and clamped the book down with the C clamps to add weight
Thank you! Super helpful 😄
so I tried double sleeving my shiny Charizard and it bent so we are trying this and hope it works but it still has a crease
You creased the card while inserting the card into the sleeve or did the perfect fit sleeve warp/bend your card?
@@RobertPaulson87 inserting
packed an SAR and it had a bend. thanksfro this
Where did you get a top loader binder I’d love to get one lol
Check out my other video on the Top Deck Toploader binder!
Super useful video 😊
Thank you 🙂
Would it be a good idea to place a blank sheet of printer paper in front and behind the card before closing the book? Because the book's pages are already saturated with heavy inks, so it should theoretically allow for any excess moisture to transfer over to the blank printer paper.
Maybe you can buy plain white construction paper (thicker..maybe it’ll add more weight) and fold a piece in half (cut it smaller) , or use a sleeve? Some of my cards have gotten stuck on the sleeves for some reason (were open and put in sleeves right away)
Hey is there a specific way to put the card in a book because my mega Rayquaza has a small Bend and i want to fix it but im scared its going to get torn up and won't be worth anything anymore 😬
Sleeve it first and if you have a semi rigid or card saver, use that too. And make sure the book is in a safe place
Great video bro🎉
Thank you for watching!
These methods are nice for a handful of cards, but for dealing with a few hundred or thousand they quickly lose viability
The only cards that have wrapped are the holo’s to the Deoxys EX release set. I have zero idea why but now I have to go flatten them out with a book lol.
Really liked this video :D I have some bend cards and will try this for sure :D
I have experience cards being bent when I get them. (Yu-Gi-Oh mostly, but sometimes Pokémon) The promo holos are the worse at this. Though I do have ringed binders that might be doing this as well. Like I restarted collecting after 20 years, and back then my storage was like the box they came in or a crayon box. Though now I do have tins, binders, and deck boxes.
Do curves really not affect the grade a bunch of cards I been pulling have slight curves to them right out the pack and I've been a little uneasy about it
I’ve personally sent curved cards that have come back as 9’s and 10’s
Do they warp because of to much moisture or to little moisture?
I believe both can occur, but most people I’ve spoken too have too much humidity
A really awesome video bro :D ROCK ON!
hey man great video!
Cool, that is so great. It is worth recommending
0:01 My left ear tickles
After so many yrs of collecting cards, I have card curve/bow issue. They were fine til semi recently. Whatever caused it seems to have only affected the holofoil or as I call them 40/60 & 60/40s and up (V, Vmax, Full arts, etc). And 98% of ones that got affected were not left out. I had them in elite trainer boxes, white card storing things get at card shop, etc. They were in a room thats room temperature is usually between 65 to 75 but usually 71 to 74. I didn't have them exposed to direct sunlight, there was no flooding, didn't spill water on them, etc. Sadly, I didn't know they curved/bowed til last weekish. Would laying them between books really work? Or getting a dehumidifier? The cards dont feel wet, moist, damp, etc they just are bowing to varying degree.
Some of mine that are in boxes in a drawer still manage to absorb moisture through the air and warp. Yes, carefully using the book method should fix the issue
To the point, no faffing. Great video 👍🏼
Thanks for sharing 🎉
My personal steps are
1: sleeve it
2: put in in a bigger plastic sleeve
3: put that sucker under a Bible and other cards (the Bible is big and won't move it around a lot of bumped)
4: forget about it for a few months
5: wow look a card!
gotta bless that cardboard!
i would also sandwich the card between felt so it wont get any scratches
yeah, just do the same from the opposite side (and add some weight like more books on) & it will fully restored after a while.
Perfect video length boss
Short answer for the fish Atention span, but some silica gel and store It right Next to your cards
Would putting the card in a cigar dehumidifier work?
I don’t smoke cigars but don’t they have to be kept at a certain humidity? It’s worth a try
If you use a standard binder with pages make sure it is a D ring not and O ring and don't overfill (to many pages) because the top pages will bend them inside the binder.
Also, is that really true grading companies don't care about the curve?
Yea I've sent in many curved cards. Its not considered damage.
I tried to iron mine that didn’t work so I tried a steamroller, also failed. Please help
This man helped me save my jumbo pikacu v max thank you so much
Awesome. Thank you for watching
@@sleevenocardbehind no problem
It’s still trashed, I’ll give you $.75 for it
@@apapz3245and why doesn't matter
@@apapz3245I have a ex Pokemon card and it's worth a dollar but I love the art on it
Where did you get that top loader binder
I found it on Amazon. It's called the Top Deck. Check out my video review of it!
Your channel name is awesome
Now I just need to find a book….
Oh yeah, it’s 2024.
A stack of iPads will work too
I find if you do the book method, leave it alone! People keep checking it to see if it works, and it doesn't becaue it takes time, give it two weeks to a month and then check it.
I did this with foil Magic cards. Unfortunately after several days of being inside a book with a lot of weight, it remained as pringly as ever once i took them out. :(
That’s so weird. The book trick has worked 100% for me
@@sleevenocardbehind perhaps its cuz I live in a basement apartment, even if they're in the book the humidity won't let them uncurl.
A friend of mine told me to put them in a sealed container with desiccant packets...
You should try that! And report back!
He's gonna supply me with one desiccant pack tonight 😅
I also thought maybe rice would work too. (Obviously putting it in a sleeve to not have it all scratched up)
That helps for like a handful of cards but what about when i have stacks that are warped lol
Ok I I bought this desiccant thing from Walmart. It’s a big puck shaped thing and it sucks all the moisture out of the air. I put a bunch of cards in an air tight container and put this in it and it helped a bit
Very good bro ! You got a new subscriber !
Thank you so much
the reason the blow dryer doesn't work is that your cards have less humidity than the humidity of the location of where it was made. So trying to use a blow dryer to heat it up actually makes it worse!
and it's not always the humidity! it could just be heat (cold) expanding (contracting) the more metalic foil part! it's actually just very simple thermal stuff
How do I fix smudging of colours?
I don’t think that is fixable, unfortunately
Does this works with fake cards
I don’t see why not
I’m extra extra extra extra 😂 Nice job!
Thank you
How do I straighten cards down inside a sealed pack?
I think I would still recommend the book method for that.
@@sleevenocardbehind excellent, thanks for replying
I just threaten them back into shape.
I Sandwiched my mega ampharos full art between two Xbox cases and put my bass amp on top
I just put mine on the hard-cover page inside my 5 lb dictionary. Hey, my teacher told me to use it!
Bro is it normal? I use rubber bands to store my cards and they still bend can you tell me a better way to store the cards
Rubber bands!? Don’t you have a binder?
@@sleevenocardbehind no bro
@@travelstation8085 You need to get sleeves and a binder before you buy anymore cards!
@@sleevenocardbehind ok bro can you provide me a link for the cheapest binder
I’d recommend something like this amzn.to/45A7bp9
Ive never been able to flatten a card with just weight. You have to fix the humidity.
Does it fix creases?
Nope! Sorry
I think this one is pretty good
thnx for the vid. Your voice was only coming out of my left headphone @_@
Had my card in cases in storage just got them out to see thay this had happened
Cheers.
Cheers bud
Double sleeves works best, leave it in a day and it will fix it
Hey what if it’s in a slab
Your card is curling inside the slab? Desiccant packets should work
@@sleevenocardbehind how many days you think till the desiccant packets make it straight
@@tr4ilblazin I can't say, it depends on how humid your environment is
@@sleevenocardbehind I’m in Hawaii it’s pretty hot during the day I just had them i them in closet I just now I transfer them to a slab box
Your cards are too dry that's why they're curling a humidity pack 60 to 65% in a sealed container with your cards will straighten them out.
My left ear didnt like this video
You saved my reshiram v
My left ear enjoyed this video
Explain? You're not the first to comment this
@@sleevenocardbehind You messed up the narration audio, it's not in stereo, when u watch the vid with headphones the narration audio comes only from the left earbud
@@jacoposchwitter5151 Thank you for telling me
My dumbass just throws the cards in one of those burgerking decks and shoves them in a drawer
Nice vídeo! But it didnt show any method To unbent The cards ~100% efecttive. Thanks anyway!
The book method will 100% fix a warped card, it just needs the right amount of time. I'm sorry if that point wasn't clear. I will get better!
@@sleevenocardbehind you were clear lol
Because they are being cheap compared to the good old days they never did that
For some reason my official Pokemon sleeves bent my cards
I've heard of this but it's never happened to me. Are you certain its the sleeves and not the humidity? Are all your cards bending in the sleeves or just the holo cards?
Yes it's the sleeves and not the humidity and I tested it with holos and non holos and GXs and they bend them in like a day or two
don't bully gengar lil brother
Mine isn't just bent, I also put it in the washing machine by mistake 😅😅
thx my charazard ex is goo as new!
I should make a video using my hydraulic press
Try heat pressing
Wow, this super great, brand new experience, new fairy world, I support,#rnewelf
Now why would you keep cards in the bathroom?
Only water type of course
Or just carefully bend it the other way. Ben it around a rolling pin if you like. You can fix this in minutes not days.
Lies.... I tried it with a book and nothing worked.......
Was it a short book?
@@nicemilk8830 no.. maybe it was a goosebump hardcover, I tried to use it to flatten those Yu-Gi-Oh cards and it only made them worse.
@@sag4186 I used 2 pieces of wood to fix my cards😀
Music is killing the voice over
Sorry! My videos have gotten a lot better since then
So the real answer is: lmao you're fucked if you didn't open you card in a dehumidified bunker and keep them there. Good to know.