Kamolee 520 NM | Impact Driver | Impact Wrench | Unboxing | Review

Kamolee 520 nm impact Wrench
Kamolee 520
Kamolee 520 nm impact Driver
It is cheap i take more time to remove the hard tighten bolts, but it works. I recommend if you don’t wanna spend money then buy it.

[@Cheordig]

Straightening the notch on the axle nut first would probably help with an underpowered impact wrench. Either way, don't forget to put the notch back afterwards!

[@goodshepherd536]

@5:44 it should come with a rubber O-ring that goes around the socket to hold the pin in place

[@johnh7058]

I have this tool with a different name and control panel. True power is probably less than 300Nm.. It struggled with axle nut but at least it took it off. Mine has a small magnet inside the chuck for holding bits but needed to glue it on to keep it from coming out.

[@DiyMechanics]

This one also struggles to open the axle nut and get too loud but at the end it removes it. I never tried the bits yet it might have the magnet. If it does i will let you know.