1mm Ref Magnet using Silhouette Cameo 5 & Kraft Blade

A lot you are asking if kaya ba ng Cameo machines. Hope this video helps.
Email : [e-mail]
Editing App : ‪@CapCutofficial‬
#cameo5
#silhouettestudio
#silhouettemachine
#silhouettecameo
#refmagnet
#souvenirmaking

[@JonessaGaling]

Hi good day po. Pwede ba ang auto blade pang cut sa magnetic sheet or need talaga ng kraft blade?

[@AngelaDaryllLim]

Hello po sorry ndi ko po masyado nagets ung sa passes at force ? magkakaiba po sya sa kada run nyo? ano po ang final settings ?

[@derickpatricio1023]

naka try na po kayo alternative blades bukod sa mga original blade for cameo 5?

[@kprintscraft]

Cameo 3 before, yes. Pero di na ko umulit sa mga sumunod na machines ko 🤭 bukod sa gugugol ng oras para sa adjusment, found out na in the long run pwede ma-damage ng alternative blades ang blade carriage. Since it is not made specifically for cameo machines. So since then original blades lang gamit ko and so far lahat ng machines ko from 2017 working and in perfect condition. And iba na mga owners, nagagamit pa nila ng maayos.

[@kristillaguno9940]

ilang beses po b ulit icut?

[@keppysworld2505]

hi ask ko lang po if same settings rin po ba sa cameo 4 using kraft blade? and I have magnetic sheets with adhesive paano po pag cut facing the sticker sheets po ba or yung other side? I’m new to this material po sana ma notice..

[@kprintscraft]

Hello! yes, same lang settings sa cameo 4. if with adhesive, better nasa ibabaw yung adhesive. add ka na lang siguro ng force since may dadaan pa sya adhesive before yung mismong magnet. but gradual lang ang dagdag ha.

[@acymiro5998]

force 14 or 20 ang 1st cut? sabe nyo po kasi sa early part ng video force 20 tpos later on naging force 14 ang 1st 3 cuts, then 15 for the last cut. medyo confusing lang.

[@kprintscraft]

Hi! BLADE DEPTH IS 20, yung FORCE ang first three passes is 14 then last pass is 15. Magkaiba po sila. Hindi na po ako nagbago ng Blade Depth :)

[@jhazferrer]

Hello pano pokaya magpalit ng carriage? pag leather po kasi icucut ko di po nag aauto detect ung kraft blade 3mm na nasa carriage 2 po e
TIA

[@kprintscraft]

@@jhazferrer try changing the material sa carriage 2. Pag may exclamation point beside it, ibig sabihin hindi pwede gamitin yung settings nun for cutting kaya walang lumalabas na option

[@ravenservando6221]

hello pwede po na idikit muna po yung sticker sa ref magnet para minsan na po ma cut lahat ?

[@kprintscraft]

I don't recommend po. Since may smart cut po, may tendency na ma-cut yung printed image. And hindi po ganun ka-accurate si kraft blade for print and cut. Mas better po cut hiwalay.

[@ravenservando6221]

@@kprintscraft what about po dun sa brother cutting machine mas okay po ba yun for ref magnets ?

[@kprintscraft]

@@ravenservando6221 sorry I can't say po. Never owned a brother cutting machine ever :)

[@ravenservando6221]

@@kprintscraft thank you so much po

[@kprintscraft]

@@ravenservando6221 welcome :)

[@arvzprintingexpress7488]

Ung cameo 4 ko po, force -5 2 passes lang... cut na agad. Magkaiba ba clang force?

[@arvzprintingexpress7488]

Blade - 11 (kraft Blade- 3mm)
Force - 5
Passes - 2
Speed - 2
Yan lang po setting ko. Almost tagos na sa mat ang cut.

[@cathjimenez8814]

Hello po, pano po gagawin pag hindi naseselect yung carriage 2? Yung autoblade po yung pinipili nya pag cutting na eh :'(

[@kprintscraft]

Hi! Nakalapat ba maigi yung kraft blade sa carriage?

[@zebragreen3944]

Same lng ba na kraft blade cameo 4 at 5?

[@mrs.guevarra5552]

Yes po

[@buenaflorjb]

question po ano pong version ng silhouette studio po ninyo?

[@kprintscraft]

Latest po, 4.5.7 kasi hindi po mag-work ang older version sa mga newest machines if hindi updated

[@maucatahan5479]

Ano po size nian? at kung sakali po magkno po kaya bentahan po.

[@kprintscraft]

Hi! This is around 2x2inches. If ako po tatanungin sa price, 35 each po. Pero sakin po yun ah, mataas po talaga ko mag-price ha. Depende po sa computation nyo po sa gamit :)

[@AyronAwesome]

Bakiy po kaya nag fafail registartion yung sakin pag datring sa kraft blade?

[@kprintscraft]

what material are you trying to cut gamit ang kraft blade? this blade is not applicable for print and cut projects.

[@AyronAwesome]

@@kprintscraft okay na po maam slamat, nakuha kona po, off ko yung registration.. tpos gumawa ako ng limang template na papa taas ang force, hirap pa din icut ung 1mm magnet sheet. Salamat po

[@kprintscraft]

@@AyronAwesome ok po, once naman na nag-cut through na kahit pano sa back ng magnet, madali na alisin yung magnet na na-cut. as long as manipis na lang naiiwan sa likod.

[@AteGel11]

hi how much po benta nio

[@lourdesmorante2562]

Good day! I tried you settings with my Cameo4, pero ayaw pa rin po ma-cut ng magnetic sheet :( bakit po kaya?

[@kprintscraft]

Kraft blade po gamit? 3mm?

[@lourdesmorante2562]

@@kprintscraft yes po, 3 mm kraft blade din

[@zdaily9025]

Nag try din po ako using your setting pero puro smart cut lang na cut nya ung mismong outline hindi nya na cut tapos titigil nalang sya bigla

[@kristillaguno9940]

ndi bkkyanin kpag original blade ggmitin?

[@kprintscraft]

Masyado po makapal ang magnet for the original blade. Baka po nag uumpisa palang i-cut, putol na po original blade. Sayang po. Mas malaki po talaga ang kraft blade, so built po ito for thicker materials like magnet

[@kristillaguno9940]

@@kprintscraft san po need bumili?link po
at cameo4 po gamit q

[@kristillaguno9940]

slamat po

[@kprintscraft]

@@kristillaguno9940 3mm kraft blade po pwede. You can check beehappy, arfs and crafts or usagi. Authorized dealers yan ng Silhouette Ph :)

[@aryanmaeeeee7700]

Okay lang po ba to sa cameo 4 na settings?

[@kprintscraft]

Hi! Yes, pwedeng i-same settings with cameo 4

[@zromeo30]

Pwede po kaya sa cameo 3

[@kprintscraft]

@@zromeo30 meron po 2mm kraft blade for cameo 3. Yung pabilog din po. 3mm po kasi is for cameo 4 and 5 kasi square na po yung blade.

[@saranyabalaji3122]

Hi, can you post the warnings in English? I’m looking to buy cameo 5 for cutting magnetic sheets

[@kprintscraft]

Hi! Sorry late reply. My warning was about the blade, that if you use it often with a thick magnet sheet, you'll have to change blades often too since it is thick and tough to cut. But it can cut magnets, just have to do your own test cut so you'll know the best settings for your machine :)

[@saranyabalaji3122]

@@kprintscraft Hey thank you so much for the reply. How often do I have to change the blade if I cut 1mm magnetic sheet? I just ordered a cameo 5 machine. My main project would be to cut magnetic sheets. Is there any alternative for 3mm Kraft blade like CB09?

[@kprintscraft]

@@saranyabalaji3122 i wouldn't recommend a replacement blade specially with the newest line up of machine. Those blades are not made specifically for our cameo machines, and in the long run, it can cause problem with your blade holder/carriage.
With regards to how often, I guess it depends on the quantity. Your blade can last max of 1month if regular/daily use. You can add more depth or pressure if needed just in case.

[@saranyabalaji3122]

@@kprintscraft Thank you so much for taking time to reply.

[@rosedy5776]

may link po ba kayo kung san makakabuy nung kraft blade? salamat

[@kprintscraft]

Here po :
shope.ee/9A1K8kcG2K