Makes sense you say? Why is engine light still on? South Main Auto is the place to go for all the info you need on this. He explains how to diagnose and fix with detail!
I just got one of these 2011 equinox ltz's and this issue occured. Is it bad to drive the car in the meantime? Until the hub/bearings are replaced? Mine don't give me any noise or feedback but are showing the error messages.
I have a 2010 Equinox LTX 4 cyl with 130K miles on it. I got an Error message on the screen saying "Service Stabilitrack" and the next day I got a "Reduced Engine Power" message and my car would only go 40 mph. I had recently had all my brakes replaced prior to the Stabilitrack message. Do you think the two error messages are related or do I have a bigger issue to address?
th-cam.com/video/4lFByzIt7Ho/w-d-xo.html issue #4 if I remember the video correctly. Could be a throttle body or accelerator sensor issue. I'm having the same 2 issues. But mine will cut engine power and kind of "trip" until I accelerate again. Happens randomly at speeds above 60km/h. It's a headache
Just got this same car but V6 1st thing it wouldn’t go out of 2nd 3rd gear over 30. Then got P0030 sensor issues. Cleared that but now has the stability issue and engine has a tick. I am so upset and don’t know what to do
Slight variations in the car models, amongst these replies. But the root problem is the same, no matter the trim level, year, model or engine displacement. It's called Chevrolet. My daughter bought a 2012 Equinox 4 cyl with 140K and it's been one bow-tie disaster after another, in the 2+ years since. The service bulletins on the insane amounts of oil these burn (and the resultant O2 sensor and cat converter and flex-pipe failures) rank this car line one of America's great LEMON varieties. The US govt owns (actually the
@@fixnflipncars3505yes how did u know which tire to check and what is the price of that part you replaced?, I probably need 4 of those because they probably wear evenly
2013. No issues until 100k miles started blowing oil. Chevy put all new pistons in it and now at177k miles. Have had some a/c issues which seems to follow Chevrolet. The stabili light just started coming on. Other than the catalytic converter having an issue, which I didn’t fix this is the first time it’s going in the shop for over two years other than oil changes.
HELP? HAVE EASY FIX IF I CAN FIGURE THIS OUT! If this post is even being monitored - I have a stupid question re: the STABILITRAK BUTTON/ switch in the interior console.... A few years back, huge thing of soda was spilled & I know a ton of it leaked thru this spot. The button is super hard to turn on/off & I believe there must be a bunch of gooey sugar/ syrup (at this point) must be having an effect on the whole thing. The warning light comes on it seems, only when it's cold & once the car is heated up - goes away w no problem. Sometimes I'll get a pocket knife blade in there - gently trying to free up the deep edges of the button & after restarting car - light will also go away - so the goo has to be the issue. It's a 2011 Equinox LS but only have about 40k mostly hiway miles on it at this point & is always garaged (in AZ)... So there's no real wear or tear & keep it regularly maintained (syn oil, filters, just got new tires, etc) QUESTION - HOW do I REMOVE THE ORIGINAL BUTTON/ SWITCH to get in there & clean what I can so it can then be REPLACED WITH THE NEW BUTTON/ SWITCH? I don't want to screw anything up attempting to pull it out & I truly believe that the old drying up soda/ sugar is making everything stick in there.... Appreciate any info!
My service stability trak light comes on too but mine only stays on for a few seconds and goes away. When it happens it also my screen in my car go off too. Like the whole screen goes black where it shows my radio station and it does it two seconds and comes back on. Can anyone tell me whats causing this problem?
@@destroyer24kevinsmh I just bought a 2012 equinox smh first car I don't know shit lol starting to regret this investment engine light came up took it to auto-zone dude gave me some liquid to put in my gas tank the engine light went off then came right back on next day I get stability track light on reduce engine a whole head ache smh I have to get it looked at tomorrow with money that I don't have in regretting everything right now iv been stressed out ever since I bought this car everything was smooth until I got an inspection and I was told my breaks were thin after I changed the breaks all hell broke loose car started acting funny jerking stopping on the road engine making funny noises help me please
@@fixnflipncars3505 Thank you so much, you are an Angel. I thought I ordered the wrong part. I was like, wait his video said Wheel Bearring, not Wheel hub :((. I can rest easy.
I just had my wheel bearing fixed Aug now today my car won't start I just can't deal w this crap anymore finding a way to and from work after paying 1200buck which by the way is a recall but I had almost 400 miles over
I feel your pain. I just scrapped a nissan after pouring 2k into it, now have the equinox with this stabilitrak crap. I can't catch a break. @larasikora5534
@@fixnflipncars3505 so my car when idling it shakes. But it only shakes when the service stabilitrak is on . It also takes a few for the car to drive when I press the gas and took It to do a tune up.
Hey bles, I didnt show you how to install the wheel bearings, but i did show you what caused the stabiltrak to come on, which there is hardly any information about cuase of the light.
@@blesd8408 Yes! and i changed alll kinds of sensors that my scanner would tell me, and none of the codes that came up had to do with the wheel bearings. you can look underneath and see if its missing some of the magnet that i show in the video.
After I helped some guy jump start his car, he had accidentally switched the positive and negative charge on my damn battery and it starts and runs fine however I completely lost my ability to steer and it says to "Service Stabilitrak." I'm just lucky the idiot didn't blow my shit up
First video that makes any sense, a ton of videos with fixes that are the equivalent of blinker fluid.
Makes sense you say? Why is engine light still on? South Main Auto is the place to go for all the info you need on this. He explains how to diagnose and fix with detail!
Is there anything else that might throw that stabilitrak to come on?
how many bearings did you replace?
2009 Chevy Equinox stabilizer track ABS light stays on will it hurt it if I have to drive it for another 200 miles before repairing it
Did you have that sound also
I just got one of these 2011 equinox ltz's and this issue occured. Is it bad to drive the car in the meantime? Until the hub/bearings are replaced? Mine don't give me any noise or feedback but are showing the error messages.
I have a 2010 Equinox LTX 4 cyl with 130K miles on it. I got an Error message on the screen saying "Service Stabilitrack" and the next day I got a "Reduced Engine Power" message and my car would only go 40 mph. I had recently had all my brakes replaced prior to the Stabilitrack message. Do you think the two error messages are related or do I have a bigger issue to address?
th-cam.com/video/4lFByzIt7Ho/w-d-xo.html issue #4 if I remember the video correctly. Could be a throttle body or accelerator sensor issue. I'm having the same 2 issues. But mine will cut engine power and kind of "trip" until I accelerate again. Happens randomly at speeds above 60km/h. It's a headache
I'm having the same issue with the same model
Just got this same car but V6
1st thing it wouldn’t go out of 2nd 3rd gear over 30. Then got P0030 sensor issues. Cleared that but now has the stability issue and engine has a tick. I am so upset and don’t know what to do
Slight variations in the car models, amongst these replies. But the root problem is the same, no matter the trim level, year, model or engine displacement. It's called Chevrolet. My daughter bought a 2012 Equinox 4 cyl with 140K and it's been one bow-tie disaster after another, in the 2+ years since. The service bulletins on the insane amounts of oil these burn (and the resultant O2 sensor and cat converter and flex-pipe failures) rank this car line one of America's great LEMON varieties. The US govt owns (actually the
@@debrahowell6404my truck is doing the same thing what was the problem
Good evening. I have Stabilitrak Light on and Traction Control Light on just now. Can you tell me the problem?
You have to replace the whole wheel bearing? Or can you just change the ring?
Whole Wheel Bearing.
@@fixnflipncars3505 ok. Thanks.
Most modern vehicles use hub assemblies now; years ago you had to press the bearing out of the knuckle.
@@richardwatson298not entirely true I had a 2015 Corolla and you had to press in the bearings
@@KonohazFinestThe last time I saw a press out bearing was on a 2008 Pontiac Vibe, but that vehicle was basically a rebadged Toyota Matrix.
Why did you pull THAT particular bearing?
I explained on the video, the magnet was broken
I think what he means is how did you know which tire
@@fixnflipncars3505yes how did u know which tire to check and what is the price of that part you replaced?, I probably need 4 of those because they probably wear evenly
How would you know what tired it is
I changed my front hubs but the "service stabilitrak" notice and the ABS + PARKING BRAKE SIGNS are still showing up. What else should I do, please?
Make sure your abs sensors are plugged in could be the back hubs
Might be a bad steering wheel censor
How much is the wheel bearing and abs senors?
How do you know what wheel speed sensor is causing the code to show up? Mine is not giving me a location
they don't. GM is a piece of shit
How much is this to fix approximate if taken to get fixed?
Depends on where you take it. can be be between 100 to 300
Worst vehicle 🚗 ever made the Chevy equinox….. Anyone says different they never owned one … nightmare waste of money ….
I know that to be true I own one and I need six sensors for this damn thing
I own a 2015 and so far done all the repairs myself and I know Jack about cars it's been reliable so far
2013. No issues until 100k miles started blowing oil. Chevy put all new pistons in it and now at177k miles. Have had some a/c issues which seems to follow Chevrolet. The stabili light just started coming on.
Other than the catalytic converter having an issue, which I didn’t fix this is the first time it’s going in the shop for over two years other than oil changes.
@@Dbb27 that sounds like a nightmare car haha
100% agree with this
I have the same problem but instead of the stablitrak screen I get a AWD shutting off screen
Will this fix work as well for me?
HELP? HAVE EASY FIX IF I CAN FIGURE THIS OUT! If this post is even being monitored - I have a stupid question re: the STABILITRAK BUTTON/ switch in the interior console....
A few years back, huge thing of soda was spilled & I know a ton of it leaked thru this spot. The button is super hard to turn on/off & I believe there must be a bunch of gooey sugar/ syrup (at this point) must be having an effect on the whole thing. The warning light comes on it seems, only when it's cold & once the car is heated up - goes away w no problem. Sometimes I'll get a pocket knife blade in there - gently trying to free up the deep edges of the button & after restarting car - light will also go away - so the goo has to be the issue.
It's a 2011 Equinox LS but only have about 40k mostly hiway miles on it at this point & is always garaged (in AZ)... So there's no real wear or tear & keep it regularly maintained (syn oil, filters, just got new tires, etc)
QUESTION - HOW do I REMOVE THE ORIGINAL BUTTON/ SWITCH to get in there & clean what I can so it can then be REPLACED WITH THE NEW BUTTON/ SWITCH? I don't want to screw anything up attempting to pull it out & I truly believe that the old drying up soda/ sugar is making everything stick in there....
Appreciate any info!
Mine is stuck too
rubbing alcohol in it
Yes
Yrs
Mine is stuck too!😢
Isn't the abs sensor built into the wheel bearing??? Same unit
Abs sensor? Doesn't that come with a new hub bearing?
How do fix a black screen on your 2014 equinox rear back up camera
How did you know which one was the issue? Did you replace front or rear?
I replaced the one with the broken magnet. Just like i showed on the video.
My service stability trak light comes on too but mine only stays on for a few seconds and goes away. When it happens it also my screen in my car go off too. Like the whole screen goes black where it shows my radio station and it does it two seconds and comes back on. Can anyone tell me whats causing this problem?
Were you able to fix this, because my car seems to have the exact problem? I have a 2012 Chevy equinox
I’m also having the same issues and haven’t figured out why
I have a 2015 equinox and having same issues and have no power when the messages pop up.
Me to have that problem
@@destroyer24kevinsmh I just bought a 2012 equinox smh first car I don't know shit lol starting to regret this investment engine light came up took it to auto-zone dude gave me some liquid to put in my gas tank the engine light went off then came right back on next day I get stability track light on reduce engine a whole head ache smh I have to get it looked at tomorrow with money that I don't have in regretting everything right now iv been stressed out ever since I bought this car everything was smooth until I got an inspection and I was told my breaks were thin after I changed the breaks all hell broke loose car started acting funny jerking stopping on the road engine making funny noises help me please
Where did you buy the parts??
transaxle
He said ebay
My stability track just come on it makes a scratching noise right when I start driving than it goes away you think is the magnet and sensor?
Best thing to do is check underneath the car . You can see it without taking the tire off.
Tnks Sr.
How much was that brand new part?
Dude, I need an answer stat! Is the wheel bearing and the wheel hub the same thing? :O
Yes
@@fixnflipncars3505 Thank you so much, you are an Angel. I thought I ordered the wrong part. I was like, wait his video said Wheel Bearring, not Wheel hub :((. I can rest easy.
I just had my wheel bearing fixed Aug now today my car won't start I just can't deal w this crap anymore finding a way to and from work after paying 1200buck which by the way is a recall but I had almost 400 miles over
I feel your pain. I just scrapped a nissan after pouring 2k into it, now have the equinox with this stabilitrak crap. I can't catch a break. @larasikora5534
Please my is C056D electronic control unit hardware, please the meaning
How much did all that cost
Depends where you get the parts and who puts them on for you.
@@fixnflipncars3505 so my car when idling it shakes. But it only shakes when the service stabilitrak is on . It also takes a few for the car to drive when I press the gas and took It to do a tune up.
@@jcastillo6142011 thats what this one was doing
@@fixnflipncars3505an estimate would suffice, a couple hundred or a couple thousand $ is what would be helpful
Why is your check engine lights on
I'm having the same issue. But before that, my car was and still is sounding like an airplane.
Sounds like a wheel bearing, which is the same part as the video
thanks
You don't have to do all that 😂
Theres a switch and sensor in the motor you can replace
Which sensor?
Where?
Where. Please share
No car should have stability track. It's a waste of time and money and it's just more to go wrong with a vehicle. They can also cause accidents
you really didnt show how to install n shyt.
Hey bles, I didnt show you how to install the wheel bearings, but i did show you what caused the stabiltrak to come on, which there is hardly any information about cuase of the light.
@@fixnflipncars3505 did your equinox have rough idling when your stabilitrak light on
@@blesd8408 Yes! and i changed alll kinds of sensors that my scanner would tell me, and none of the codes that came up had to do with the wheel bearings. you can look underneath and see if its missing some of the magnet that i show in the video.
@@fixnflipncars3505 okay thanks man. did you change both sides or just one side
@@blesd8408 Both of them ended up being the same way. bought them from amazon.
Check engine light is still on
After I helped some guy jump start his car, he had accidentally switched the positive and negative charge on my damn battery and it starts and runs fine however I completely lost my ability to steer and it says to "Service Stabilitrak." I'm just lucky the idiot didn't blow my shit up
👍🏽
Good engineering? The metal brake grinding go to the magnet. And people buy new bearings haha