This is a wonderful video. Do you have another video that shows how to convert a more advanced file where you have different sections of stitching? For instance an outline of an animal and then how to fill in the eyes, and circles on the cheeks, plus whiskers, just something that shows how to add the different stitches. I would really appreciate knowing how to do that. I have all of the Stitch Artist modules.
The big thing about SVG files is that they come in as drawn objects. Now it is up to you to break up and/or adjust the objects so that they make sense to digitize. The various stitch types you choose is up to you. There are control videos on this playlist for each of the stitch types that explain how they work.
This was SO helpful! I just imported an SVG letter and created/converted it as an applique. It works perfect. One question, the placement, tack down and final stitches are all set. However the zig zag that happens before the final satin is too much for the fabric. How do you eliminate the zig zag stitch that happens before the satin final stitch? Thank you!
The point of an SVG file is that it comes in as drawn objects that you must adjust for digitizing. The controls videos explain all the settings you have access to in order to create the look that you want. Each digitizing project is different An SVG file brings in the objects that were drawn instead of you drawing with points or using the magic wand. Be sure to check out the stitch type controls videos on our StitchArtist playlist.
Hi, I've noticed as you split this shapes, the curves need to be adjusted. Can you have an under layer(tracing reference) with the original line artwork so you know exactly how to fix the curve? Thank you.
You can bring in any reference that you want. Screen shot? Remember that the original curves and objects of an SVG are going to have to be adjusted for digitizing. The objects used to create a stitch file are not exactly the same as what you would have for vinyl or paper cutting.
Hello i am wondering if you have a video that explains how to select certain objects inside of a fill stitch and being able to remove the stitches within the selected objects
Check out the videos on draw with points and adding holes. There are many videos that show this - be sure to read the descriptions for those key words.
Lisa, is this the only video you have out on converting an sgv file into an embroidery file? I have a customer that wants 13 care bear belly shirts. I can only find the care bear bellies in an sgv format. I have a brother scan and cut but haven’t been able to master it Any help would be greatly appreciated Linda Bowen Thank you!
The digitizing of the project is up to you! This video just shows that when you bring in an SVG the objects are drawn. Now it’s up to you to break them apart, adjust them and properly digitize the design in the style you want.
I'm on Windows 11 PC. When I select the two nodes and right click I do not see "break across". I found this image online to practice with. Is it not appearing because I have to be specific about which nodes I choose? There seems to be different types of nodes. I must be missing something.
It might be more direct to understand your question if you could send the BE working file to support so that they can explain what’s going on. Could be hole. Could be stacked nodes lots of things possible. Http://embrilliance.com/contact-us/.
I did all the steps up to create, outline, and combine holes, and when I click combine holes it's not combining everything like it should. Is this a computer or software error or is it user error? I've followed this video to a T several times and this keeps happening.
Hard to determine - it does work so not a software error. I’d reach out to support to determine the next steps to resolve to situation. Http://embrilliance.com/contact-us-2
I know I’m a complete failure, but mine doesn’t make a satin column using SA2. I can click any of the other icons in the Stitch section and it will fill in just fine, but the satin column... bupkus. What am I missing?
Thank you for this video. I am not ready for #2 yet. I am going to get used to StitchArtist #1 first. LOL
This is a wonderful video. Do you have another video that shows how to convert a more advanced file where you have different sections of stitching? For instance an outline of an animal and then how to fill in the eyes, and circles on the cheeks, plus whiskers, just something that shows how to add the different stitches. I would really appreciate knowing how to do that. I have all of the Stitch Artist modules.
The big thing about SVG files is that they come in as drawn objects. Now it is up to you to break up and/or adjust the objects so that they make sense to digitize. The various stitch types you choose is up to you. There are control videos on this playlist for each of the stitch types that explain how they work.
This is awesome! Thank you for sharing this! Can you do this with StitchArtist L1?
Thank you Lisa, as usual you have made complicated procedures very easy to accomplish with the software. Jess
This was SO helpful! I just imported an SVG letter and created/converted it as an applique. It works perfect. One question, the placement, tack down and final stitches are all set. However the zig zag that happens before the final satin is too much for the fabric. How do you eliminate the zig zag stitch that happens before the satin final stitch? Thank you!
This is the video I have been waiting for! Thank you so much, Lisa!!!!
I’d love to see this but with a much more complex SVG image. I have level 2 now and I’m trying to digitize my own logo.
The point of an SVG file is that it comes in as drawn objects that you must adjust for digitizing. The controls videos explain all the settings you have access to in order to create the look that you want. Each digitizing project is different An SVG file brings in the objects that were drawn instead of you drawing with points or using the magic wand.
Be sure to check out the stitch type controls videos on our StitchArtist playlist.
Can this be done with level 1 as well?
No. SVG importing and column inclinations are a level 2 function
www.Embrilliance.com/StitchArtist
@@Embrilliance Ok thanks.
How do I shrink the svg file? When imported into embrilliance it is larger than the hoop.
@@michellekessing1591 grab a corner and resize. Http://embrilliance.com/contact-us-2 if you need more details!
Hi, I've noticed as you split this shapes, the curves need to be adjusted. Can you have an under layer(tracing reference) with the original line artwork so you know exactly how to fix the curve? Thank you.
You can bring in any reference that you want. Screen shot? Remember that the original curves and objects of an SVG are going to have to be adjusted for digitizing. The objects used to create a stitch file are not exactly the same as what you would have for vinyl or paper cutting.
Hello i am wondering if you have a video that explains how to select certain objects inside of a fill stitch and being able to remove the stitches within the selected objects
Check out the videos on draw with points and adding holes. There are many videos that show this - be sure to read the descriptions for those key words.
Lisa, is this the only video you have out on converting an sgv file into an embroidery file?
I have a customer that wants 13 care bear belly shirts. I can only find the care bear bellies in an sgv format.
I have a brother scan and cut but haven’t been able to master it
Any help would be greatly appreciated
Linda Bowen
Thank you!
The digitizing of the project is up to you! This video just shows that when you bring in an SVG the objects are drawn. Now it’s up to you to break them apart, adjust them and properly digitize the design in the style you want.
I'm on Windows 11 PC. When I select the two nodes and right click I do not see "break across". I found this image online to practice with. Is it not appearing because I have to be specific about which nodes I choose? There seems to be different types of nodes. I must be missing something.
It might be more direct to understand your question if you could send the BE working file to support so that they can explain what’s going on. Could be hole. Could be stacked nodes lots of things possible. Http://embrilliance.com/contact-us/.
How do i select two nodes and right click on my MAC. I'm unable to get the menu.
Thanks
Check your apple Mac settings. Could be two finger click or lower right click or something else. Only you know what you have set on your Mac!
I did all the steps up to create, outline, and combine holes, and when I click combine holes it's not combining everything like it should. Is this a computer or software error or is it user error? I've followed this video to a T several times and this keeps happening.
Hard to determine - it does work so not a software error. I’d reach out to support to determine the next steps to resolve to situation. Http://embrilliance.com/contact-us-2
It`s possible to export in .PES file? Thanks awsome video
Great video! Thank you!
Ok this great! Thank you!
I know I’m a complete failure, but mine doesn’t make a satin column using SA2. I can click any of the other icons in the Stitch section and it will fill in just fine, but the satin column... bupkus. What am I missing?
slpslee1 contact support on the website for assistance. Http://embrilliance.com/contact-us/
Thanks much!
Can you show how to use an svg to create redwork
@@doloresbeger1035 redwork is a running stitch. Check out the videos on the run stitch and its controls.
Can you do this w/level one stitch artist?
jennifer dizney this is a StitchArtist L2 function as explained in the video
Wonderful, ty Lisa