Your videos are the best! I commented before about putting your grip on my VXR 28 just before bow seasoned opened up here in Indiana. I’ve gun hunted my whole life but this is my first bow. Filled my buck tag 2 weeks in on a big 8 pointer. I straight up caught the bow fever. Gun is in right now and I’m not even using one this year. I’m going bow only for whitetails from here on out. Getting that first one with a bow was a whole new level of excitement. I was thinking about getting the 31.5 with a single pin and setting it up for longer range shots while hunting field edges and using the 28 in my stand. Looks Like this V3 might be the one. Take care.
@@buddavisuals5902 Nope. Bottom of the flame is the coolest part. The middle where the fuel is equally mixing with oxygen is the hottest by a factor of about 4.
that rattle noise is probably the hamskea micro-tune dials. A lot of the time after you tighten the set screws there is still some play in the dials which can cause some vibration noise. Either that or your sight for sure though. Awesome build man!
Way to go bud. Glad to see that archery is continuing to be loved and appreciated by the younger generations. You'll be shooting 70lbs before you know it.
Awesomeness! I want to get this bow! My last was the Halon 6 for Christmas when it came out. Its been a GREAT BOW! I kinda like to upgrade every now and again. And yes, your new bow is QUIET!
Chris you inspired me to get into bow hunting and I got my biggest buck this year with my bow. Now I want to get into competitive archery, do you have any tips on getting started?
I also had a buzzing vibration...it was a small screw on the Hamskea rest. Took me two months of playing when the sight until I found it was on the rest.
Awesome build Chris. Great shooting too. I may have to go shoot one of these at my local shop. I think some of the noise you can hear is from the rest cord. My girlfriends dad and I both have VXR 31.5's that we bought at the same shop and had set up by the same guy. His has a Hamskea limb driven rest, and mine has an Ultrarest Integrate. His is slightly, but noticeably louder than mine. It is almost like a "guitar string" type sound. It seems to be coming from the limb driver cord when it goes from slack to tight, and creating a small vibration since it is attached to the spring, and therefore has some movement capability. Since the Ultrarest goes from tight to slack, it doesn't make this sound. It is minor, and more personal preference. Even with that tiny noise, it is still an incredibly quiet bow. Just my 2 cents, and something to check out and see if it is in fact making some noise. I know mine is dead quiet.
I am seeing a lot online about high foc arrows and high total arrow weights. I would like to hear what your thoughts are on that for hunting setups and what you are shooting this year. Keep the videos coming!
I see you “Robin Hooded” arrows hanging on your wall?! That’s freakin badass bro! I noticed it because about two weeks ago I did the same thing, I split my Easton axis arrow also and min is hanging up in my drive port... just thought I mention, great video, awesome bow! Hopefully I can get my hands on one eventually, great content, keep it coming!
Nice build and awesome bow...still heard a little vibration until the very last shot ,but that thing looks so sweet and I know within the first hour groups like that at 60 yards is pretty dang good!!!
Chris, I literally just installed the ultra view 2 scope on my axcel sight and had the same buzz sound and couldn’t figure it out! What was your buzz sound coming from because after you fixed the stabilizer it sounded like it was still happening. My ultra view 2 scope keeps coming loose after around 40 arrows I have to retighten. Any insight on this minor issue?
l've seen several reviews and l'm still undecided on which bow to buy, but l really enjoyed this video. lt takes work to set up and make adjustments, but i've learned that it's worth it. l like this Mathews v3. it wold be wonderful if it were carbon. Good work Chris
I have the same sight with the ultraview scope and there is something loose on it but I cant find it. Every screw is tight and it still has some vibration/noise when I shoot
Thats because your stuck shooting those bows only. Mathews is not the best any more. Every one has their opinion but when opinion turns to fact I shoot a g-5 black 3, I used to be a mathews fan but I learned like everyone else. Dude that bow treats you good try shooting it no comparison.
Mr bee i admire you like you dont know i wish I can shoot the way you do. What I mean is I thought you shot for mathews professionaly. If I am wrong I apologize.
why did you put a hamskea release on the v3 instead of the Matthews drop away? does the hamskea have some more advantages? Asking cuz I'm getting a v3 and don't know which rest to put
Awesome bow build Chris. Makes me want to go out and buy one now with all the accessories! 🤙🏼 wish I lived next door to you man. Is the Hamskea rest noisy?
I have the same set up Chris. my only question is what bow case do u use to carry the set up with scope on it. or do u remove scope every time n check zero every time u assemble it..
When you set your center shot, do you run the center of the arrow through the center of the Berger hole? Or the bottom of the arrow through the center of the Berger hole?
The RS string level doesn't snap onto the bare string snug and flops backwards. You have to get it on the serving to give you the true level of the string, or just push the level against the string lightly to get it flush to the string.
Hamskea has a update to there trinity rest mounting plates. They have a mounting plate with a center set screw hole so they can be used on the Mathews risers.
I’m sure someone has already mentioned it. Just be careful pressing the v3 bows and any other “past parallels” limbs on the last chance options. The fingers have to be moved all the way in so they don’t put tension on that skinny part of the limb. Sweet bow build though!
It sounds like it's still making a 'buzz' sound even after tightening that cap. My VXR makes the same noise. I narrowed it down to loose fiber optics in the sight. I'm almost positive that's your problem as well, sounds exactly the same as mine. I run a Fast Eddie. Not sure if there's much you can do to fix it other than seeing if the sight can be warranted out for a new one.
Awesome vids love them all! Newbie from Ny. So when you shoot to the right you move the sight to the left? And bumping the rest if you are shooting left you move it to the right? Thanks in advance. 🙏
I am looking for a new sight for my bow what do you recommend? Do you recommend that sight that you installed on the new v3? What mount did you use for it?
You have made me love bow hunting and archery in general so much and I’m glad your an influencer of the way I shoot
Same 🙌🏼🙌🏼
Your videos are the best! I commented before about putting your grip on my VXR 28 just before bow seasoned opened up here in Indiana. I’ve gun hunted my whole life but this is my first bow. Filled my buck tag 2 weeks in on a big 8 pointer. I straight up caught the bow fever. Gun is in right now and I’m not even using one this year. I’m going bow only for whitetails from here on out. Getting that first one with a bow was a whole new level of excitement. I was thinking about getting the 31.5 with a single pin and setting it up for longer range shots while hunting field edges and using the 28 in my stand. Looks Like this V3 might be the one. Take care.
FYI the blue part of the flame is the hottest part. Great tip though about melting slowly the ends of the loops.
FYI Chris
The blue part of the flame 🔥 is the hottest part
Lol 😂
@@buddavisuals5902 Nope. Bottom of the flame is the coolest part. The middle where the fuel is equally mixing with oxygen is the hottest by a factor of about 4.
I just want to say I love your videos and how you explain things. I’ve learned a lot from you.
Who else was waiting for Chris to make the V3 bow build as soon as you saw it release?
I was
He was the first person I thought of
Well my cousin told me that the v3 came out and I was so excited to watch this video
Me
I absolutely love watching bow builds from this guy, its always so cool to watch!
As an archer that wants to learn how to set up my own bow, this video really helped explain the steps involved. Nice job and sweet bow man!
Love the bow builds Chris can’t wait to see the vid on the Kansas buck
Me too I’m pumped to see that video
Same that thing is monster
The buzz the bow is making is driving me nuts.
in a good way? what might be the issue for a loud or buzzing bow?
@@Firefox-cr3jw Probably the sight vibrating. It's in a bad way cause it isn't part of the riser and sounds more unnatural.
that rattle noise is probably the hamskea micro-tune dials. A lot of the time after you tighten the set screws there is still some play in the dials which can cause some vibration noise. Either that or your sight for sure though. Awesome build man!
Dude, I could watch this for hours. Just setting up new bows.
I think you should do an informative video on shooting a back tension release! Just what you do and how you go about it every time!
Going down to Lancaster today for my V3.
Can’t wait!
I’m learning so much from you thanks I’m teaching myself by watching you.
First time for everything. Bullet hole first try never seen Chris do that before. Good job man keep it up.
You should do a video on your bow room! You’ve changed things around! Great bow build though!!! Can’t wait to see the rest of the videos!!
Just maxed out my youth bows weigh today. Time for an adult now I guess 🤷🏼♂️
What poundage did your bow max out at?
@@landonglick7174 I think 55
I maxed my youth bow out too. It maxes at 70
That's a great feeling ngl
Way to go bud. Glad to see that archery is continuing to be loved and appreciated by the younger generations. You'll be shooting 70lbs before you know it.
Thanks for actually going through your entire process. This helps me a lot.
Dropping vids at 1030 when I’m about to go to bed dang it! Now I gotta watch! Lol love the videos!
I just put this bow on layaway , I just got into archery and this my first bow. I’m excited to pay it off and start practicing
It's been so long since I have watched bro u have definitely grown clout wise
Chris, great videos. I started watching them the other evening and really got hooked….
Love hamskea rests. Got one on my old switchback xt. Had to shim it with some washers because it has a thinner riser but worked out great
Bought myself a V3 31 for my elk hunt this fall.. Super Excited! 😆😆
I had that same rattle from that side bar mount! Took me forever to find it. Thought I was going crazy!
I want to get the Stoke so bad some day! It’s my dream bow, hopefully it happens some day!
You should do a giveaway on your old bow. It would be a huge upgrade for some of us that can't afford a mathews upgrade....lol
Dang. I need one of those ultra views! Been looking at them recently. Didn’t realize Chris had them all 😂
Awesomeness! I want to get this bow! My last was the Halon 6 for Christmas when it came out. Its been a GREAT BOW! I kinda like to upgrade every now and again. And yes, your new bow is QUIET!
Your and miss mouse's vids are better than any tv, plus educational, thanks and keep it up.
Chris you inspired me to get into bow hunting and I got my biggest buck this year with my bow. Now I want to get into competitive archery, do you have any tips on getting started?
He definitely inspired me to get in to bow hunting maby I can get a big buck to this season lol
@@masonlanning4031 Good Luck!
I also had a buzzing vibration...it was a small screw on the Hamskea rest. Took me two months of playing when the sight until I found it was on the rest.
I've never seen someone so steady and focused during a shot .
Awesome build Chris. Great shooting too. I may have to go shoot one of these at my local shop.
I think some of the noise you can hear is from the rest cord. My girlfriends dad and I both have VXR 31.5's that we bought at the same shop and had set up by the same guy. His has a Hamskea limb driven rest, and mine has an Ultrarest Integrate. His is slightly, but noticeably louder than mine. It is almost like a "guitar string" type sound. It seems to be coming from the limb driver cord when it goes from slack to tight, and creating a small vibration since it is attached to the spring, and therefore has some movement capability. Since the Ultrarest goes from tight to slack, it doesn't make this sound. It is minor, and more personal preference. Even with that tiny noise, it is still an incredibly quiet bow.
Just my 2 cents, and something to check out and see if it is in fact making some noise. I know mine is dead quiet.
Just finished your proving ground video from mathews! Can't wait for that Kansas buck to drop here on your channel! Congrats on a mega buck!
I am seeing a lot online about high foc arrows and high total arrow weights. I would like to hear what your thoughts are on that for hunting setups and what you are shooting this year. Keep the videos coming!
I see you “Robin Hooded” arrows hanging on your wall?! That’s freakin badass bro! I noticed it because about two weeks ago I did the same thing, I split my Easton axis arrow also and min is hanging up in my drive port... just thought I mention, great video, awesome bow! Hopefully I can get my hands on one eventually, great content, keep it coming!
Nice build and awesome bow...still heard a little vibration until the very last shot ,but that thing looks so sweet and I know within the first hour groups like that at 60 yards is pretty dang good!!!
Congratulations on 100k man watching you has made me really want to get into target archery and bow hunting
Just going to go to bed but I have to stay up for this
Love that Ultraview hinge......I spy with my little eye.....a wrist sling mounting point maybe?
Chris, I literally just installed the ultra view 2 scope on my axcel sight and had the same buzz sound and couldn’t figure it out! What was your buzz sound coming from because after you fixed the stabilizer it sounded like it was still happening. My ultra view 2 scope keeps coming loose after around 40 arrows I have to retighten. Any insight on this minor issue?
I noticed that buzz after he said he fixed it too. Definitely sounded like something loose or rattling
That bow is SICK! Also, can’t wait to see that new Ultraview Hinge update. Looks awesome!
I just got my first bow and I enjoy it, think for all the think u show on TH-cam,
beautiful job Chris with greetings from Poland👌
Awesome build! 😎 I saw that new Mathews video and exited to see those videos on your Chanel!
Was about to go to sleep and then I refreshed TH-cam and saw this. Time for a late night
U single handedly got me into hunting
l've seen several reviews and l'm still undecided on which bow to buy, but l really enjoyed this video. lt takes work to set up and make adjustments, but i've learned that it's worth it. l like this Mathews v3. it wold be wonderful if it were carbon. Good work Chris
I have the same sight with the ultraview scope and there is something loose on it but I cant find it. Every screw is tight and it still has some vibration/noise when I shoot
Yes! Always makes my day. You should do another podcast
Im big on having a quiet bow you can take a nap between shots she's so quiet, has mathews finally made a silent bow. Good luck with it Bee.
Thats because your stuck shooting those bows only. Mathews is not the best any more. Every one has their opinion but when opinion turns to fact I shoot a g-5 black 3, I used to be a mathews fan but I learned like everyone else. Dude that bow treats you good try shooting it no comparison.
@@josephpapale7087 I'm stuck shooting those bows only? Not quite sure what you mean by that.
Mr bee i admire you like you dont know i wish I can shoot the way you do. What I mean is I thought you shot for mathews professionaly. If I am wrong I apologize.
why did you put a hamskea release on the v3 instead of the Matthews drop away? does the hamskea have some more advantages? Asking cuz I'm getting a v3 and don't know which rest to put
Chris's bow builds are my favorite 🤟
Awesome bow build Chris. Makes me
want to go out and buy one now with all the accessories! 🤙🏼 wish I lived next door to you man. Is the Hamskea rest noisy?
Monkey tails work great above the slide lock on the Hamskea and their easy to take on and off when tuning. Serving is a good idea as well.
Well don Mathews for thinking about bow presses when designing not need to buy adaptors as you do with other brands
I have the same set up Chris. my only question is what bow case do u use to carry the set up with scope on it. or do u remove scope every time n check zero every time u assemble it..
Take a drink evey time he drops something 😂 awesome video!
When you set your center shot, do you run the center of the arrow through the center of the Berger hole? Or the bottom of the arrow through the center of the Berger hole?
You release this so I see it first thing in the morning?!?! How am I supposed to go to work now?! 👀
That thing just looks so smooth.
And so the videos begin.🙌🏽🙌🏽🐝
Congratulations on 100K
Great Build! Good luck on your hunts!
The RS string level doesn't snap onto the bare string snug and flops backwards. You have to get it on the serving to give you the true level of the string, or just push the level against the string lightly to get it flush to the string.
Great build and vid buddy! AND almost to 100k 👍 KS monster, 100k...great V3 vid. Whats next? 😁
He’s got a 100k 🥳🥳🥳🥳🥳🥳🥳🥳🥳🎉🎉🎉🥳🥳🥳🥳🥳
@@remingtonsmith734 8 iTunes 5u 55p8xi u
Killing it!
Thanks Chris, awesome video. How much was your set up here? Could you share the breakdown please?
Great video, waiting on my V3 be here wednesday...what backstop is that outside around the red target....?
Hamskea has a update to there trinity rest mounting plates. They have a mounting plate with a center set screw hole so they can be used on the Mathews risers.
Like the channel and the darton nock off, been watching your channel for two years now so excited to see you get to 100,000
Hi, Chris.
Wonderful V3 bow, unfortunately I will never be able to have it!
Congratulations on what you do!
Where did you get the yellow rings on the stabilizer
DEFINITELY Looking to get a V3 So thanks for the build, but now I don't trust my shop to put it together in detail like you did lmao 🤣
Your so close to 100k I can see the million mark in the next year!
Chris your so close to one mill love your vids
Hey, I love your videos! Would you be able to link your sight and the scope? I can’t seem to find the scope you swapped it for
I’m sure someone has already mentioned it. Just be careful pressing the v3 bows and any other “past parallels” limbs on the last chance options. The fingers have to be moved all the way in so they don’t put tension on that skinny part of the limb. Sweet bow build though!
Dude! Been waiting for this years hunts to drop!
I'm wondering if the long version pulls back easier than the short version.
Set at the same poundage of course
Great build ! I watched the entire video 👍🏽
It sounds like it's still making a 'buzz' sound even after tightening that cap. My VXR makes the same noise. I narrowed it down to loose fiber optics in the sight. I'm almost positive that's your problem as well, sounds exactly the same as mine. I run a Fast Eddie. Not sure if there's much you can do to fix it other than seeing if the sight can be warranted out for a new one.
Love these videos. I am curious as to why you don't put in peep before setting the center shot?
What release do you use? It sounds like it has a safety that you switch off before you shoot
I love these bow build vids! What r u gonna do when u get to 100k!!!
Great setup thanks for sharing
Whoooo! 100k! 🥳🥳🥳🎉🎉🎉
Just got the vxr and they just came out with the v3 I need new center serving 😂already
What!
Didn’t you know that their new bow was about to come out?
Nothing wrong with the vxr!
Would you recommend this bow for a 30.5 draw lenght guy? Im a bit worried about the string angle
Congratulations on 100k subs🥳🥳
I was waiting on this. Do the v3 27 now!
Awesome vids love them all! Newbie from Ny. So when you shoot to the right you move the sight to the left? And bumping the rest if you are shooting left you move it to the right? Thanks in advance. 🙏
I got the vertex thinking about getting one of them
I am looking for a new sight for my bow what do you recommend? Do you recommend that sight that you installed on the new v3? What mount did you use for it?
I miss the Easton FMJ and helios vanes, that was my favorite arrow set up.
What's the reasoning for only tying in one nock set, versus two? Thanks.
Shop I work at in se Michigan sold so many vxr’s this year, excited to see how this v3 is gonna do
Now there all for sale ebay is flooded with them
I started shooting mathews again this year but prefer hoyts grip. I tried the side plates still wobbling. Your grip how close is the feel to hoyts
Sometime you should post a video about your editing tricks
They are sick
chris bee : *coughed
chris bee : "corona"
*Is still relevant
It got a lil annoying😂
I got covid now and it sucks lol
My thought are with you, hope you have a speedy recovery.
Also Chris bee "SupposeBly"