Mitsubishi ZH Outlander CV Boot Change 2006-2012
ฝัง
- เผยแพร่เมื่อ 18 เม.ย. 2023
- DIY guide to for the removal and replacement of a CV driveshaft on a Mitsubishi ZH Outlander. I'll also be changing out the CV boots on the inner and out joints. This covers the 2nd generation Outlander
Hope you enjoy the video
Join Shanes Shed channel to get early access to my videos before the public release dates:
/ @shanes_shed
Instagram: / shanes_shed
If you enjoyed this video and would like to see more then please give me a thumbs up, leave a comment and consider subscribing so you don't miss a new upload. You don't have to do all three (or any if you don't want) but it really helps grow the channel If you'd like to support the channel so I can keep making videos for you all then please consider a donation via the super thanks! - ยานยนต์และพาหนะ
Muchas gracias por tu video... me ayudo mucho...
Thanks for this video appreciate it .
Your welcome
Great video mate
This will help heaps and save $$$
Thanks Byron. This was about the only thing I could find wrong with this car when I brought it so was nice to get it sorted
Very informative. Cheers
@@carrliinhj1110 your welcome
Is there any way to get just the outer one off without taking the inner one off
Mitsubishi repair manual says that the outer joint can not be disassembled. It may be possible, however I've always taken the approach to replace both boots while the driveshaft is out of the car so the inner joint is the path of least resistance to disassemble. But in saying that there are other options around - like CV boots that can be stretched over the CV (but special tools are required to do it) and I've even seen split CV boots that you can put over the shaft and then the two halves are glued together.
Thanks for the vid. Can i know the specs of inner and outer cv joint boots?
Nothing particularly special there - I just ordered boots to suit from my local auto parts store.
I have another question. If I pullout the CV joint. Is the ATF fluid gonna leak? Should I prepare atf fluid too?
@@emersoncosejo9983 possibly, I would expect to loose some, but not a lot. Just jack up one side at a time when doing them so the fluid is mostly at the opposite side of the trans
any oil loss from gearbox?
No nothing major.
Is your vehicles a 4 cyclinder or 6 cyclinder?
4 cylinder