BACK-TO-BACK DYNO TEST: 5.7L Hemi Gets Intake, Headers, Camshaft!
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- We're back with another Staged Package comparison! This time, we're showing the dyno data between intake, headers, and camshaft on Walter's 2022 Dodge Charger R/T! This video covers each of our Naturally Aspirated Staged Packages for 5.7L Hemi explained, installed & tuned, and put to the test back-to-back!
Follow along in the shop as we take this Charger R/T from showroom stock, to Stage-1, Stage-2, and Stage-3, with results highlighted throughout. Below are the contents of each Package covered:
Stage-1
• JLT Performance Series-II air-intake system
• National Speed in-house ECU/PCM unlock (for 2015-2022 models)
• SmartAccess cable (for 2018-2022 models)
• Optional JLT Performance air-oil separator
Stage-2
• All Stage-1 contents, plus:
• Stainless Works Stainless Power 1.875" primary ID long-tube headers
• OEM Mopar exhaust manifold gaskets
Stage-3
• All Stage-1 & Stage-2 contents, plus:
• Custom National Speed billet-core camshaft by Cam Motion
• COMP Cams phase limiter
• Brian Tooley Racing pushrods
• Brian Tooley Racing valve springs
• Brian Tooley Racing steel retainers
• Brian Tooley Racing locks
• Brian Tooley Racing spring seats
• NGK Spark Plugs LZTR6AIX-13 spark plugs
• OEM Mopar SRT Hellcat hydraulic valve lifters
• OEM Mopar SRT Hellcat engine oil pump
• OEM Mopar gaskets & seals
• OEM Mopar MDS delete components
• OEM Mopar fasteners
• OEM Mopar coolant
• Driven Racing LS30 synthetic engine oil
Looking for more performance out of your Mopar? Learn about our Performance Packages here: nationalspeedi...
We want to hear from you!
Contact Us: nationalspeedi...
Phone: 833-628-7733
Connect with National Speed online:
Subscribe to our TH-cam channel: / nationalspeedinc
Visit our Website: nationalspeedi...
Like us on Facebook: / nationalspeed
Follow us on Instagram: / nationalspeed
Visit us at one of our shops: nationalspeedi...
422 whp is essentially around what a Scat Pack would be putting to the wheels, that would be some good gains for the R/T
Crazy that’s only cold air intake,cam,headers if you add a 6.4 intake manifold,hellcat fuel injectors a good tune and a throttle body and a whole cat back exhaust system easily 450 whp to 480whp and about 510-540 to the crank
This is interesting. I went a completely different route with my car. It was a 2011 300C 5.7. I swapped in a 6.4 from HHP. The main difference is the 6.4 makes a lot more torque down low than this modded 5.7. My engine is hitting over 400ft-lbs at just 1250RPM. Also, the 6.4 is hitting over 400HP by 4,000RPM whereas the 5.7 needs to get over 5,000RPM to get to 400. My peak numbers are similar 425@6010 and 427@3960 but the 6.4 gives me a much wider power peak. In fact, I am sure I could get another 25-35 HP if I changed my exhaust. I am currently running the stock 300C 5.7 exhaust which is not very free flowing. On the positive side, the car is as quiet as a base 300 but with Scat Pack power so troopers don't even give it a second look on the highway!
...........you are not getting 25 to 35 hp with an exhaust
@scitizenkane1 Yeah, I would definitely get that with my car because I would get a new tune. The current tune is for loads of low end torque because I have the stock 5.7 300 exhaust and granny gears. Going to a 3.06 LSD and a free flowing exhaust, they could easily put in a tune and get 25 HP
That's a perfect 5.7 hemi build I can't wait to build mine with similar specs, what kind of cam grind does that 5.7 have whats the lift and duration specs and lsa
LOVE seeing 5.7 content...not only that, but the way you did all stages, dyno'd and then showed gains is PERFECT. I'm glad I found you guys....my Daytona 5.7 needs that NA Stage 3.
The 5.7 hemi community really appreciates this, there are a lot of us out here. Is it ok to go with a larger stall converter on this set up ? But I’m assuming that your performance cam was spec’ed out to work with the stock converter. Thanks
That chop on the 5.7 is so satisfying 🔥🔥🔥
YES!!!!! 5.7 content!!!! 💪🏽💪🏽💪🏽💪🏽💪🏽
What makes this so great is majority of dodge fans have a 5.7 hemi if not a v6 so it only makes sense but to do this, and they do everything in steps so you can see what kind of power you’ll get from this i don’t something to crazy but this definitely makes me want to cam my 5.7
MOPAR thhhhhhhhhhhaaaaaaattttttt my car. I’m so excited and happy that you guys did the work thank you so so much! Super charger incoming
Of course, Walter! It was a pleasure, man. Glad to be able to share your badass R/T with everyone!
@@NationalSpeedInc I have sent it everywhere
@@walt669 post some races or 60 to 130 why do all rt owners who get modded never race lol? I been racing mines since I got it 3 years ago I race faster cars just to see where I Wana be
@@just_a5.7 I’m on it
@@walt669 subbed 2011 R/T Max 💪🏽 Redline Pearl
This is interesting. I went a completely different route with my car. It was a 2011 300C 5.7. I swapped in a 6.4 from HHP. The main difference is the 6.4 makes a lot more torque down low than this modded 5.7. My engine is hitting over 400ft-lbs at just 1250RPM. Also, the 6.4 is hitting over 400HP by 4,000RPM whereas the 5.7 needs to get over 5,000RPM to get to 400. My peak numbers are similar 425@6010 and 427@3960 but the 6.4 gives me a much wider power peak. In fact, I am sure I could get another 25-35 HP if I changed my exhaust. I am currently running the stock 300C 5.7 exhaust which is not very free flowing. On the positive side, the car is as quiet as a base 300 but with Scat Pack power so troopers don't even give it a second look on the highway!
These are similar numbers i was pushing in my 15' 5.7L Challenger (Cam,Headers,tune) I finally did a procharger a couple of years ago, im now @545rwhp and 560rwtq stock bottom end and conservative tune. No issues so far, currently at 90K miles on odometer. 👍
You guys deserve wayyy more subs with this content 👌🏽
Suprised there aren't more people in here saying "with the money you spend, you could have just gotten an SRT 392."
Depends on what you want. If you want to make serious power out of an engine, you start with the 5.7. If you want more power from the go, but less ability to add a ton of power without massive loads of $$, then get the 6.4. 6.4 is a phenomenal motor, but they are made of glass when trying to go over 8 psi.
Pretty much what he show yall the RT a beast
Do stage 3 on the scatpack PLEASE!! 🙏🏻🔥
Those Torque numbers are insane for the 5.7! Maybe a bit of factory freak too.
I can find 5.7 content finally !!! I just earned yourself a subscriber !
Thanks! We've got a lot of content ready to roll with a few awesome 5.7s in the mix.
Ikr
Hey quick ? Brother nag-1 charger 5.7 currently on 85 Shorty headers and a throttle body hellcat air box filter. I was thinking about doing the cam kid in a gear but I also wouldn’t mind just swapping the six floor and Baltimore right in which one should I do which one do you recommend? Is there a reason why people don’t do the six floor is it because it’s costly to install it?
426whp that’s scat power I need this
Nice work! Before you guys move to try a different manifold and throttle body , you guys should try porting both stock items , and re dyno just so people can if they can gain a bit more with ported stock mani and throttle … then add e-85 to see the gains , this channel is awesome!! Great content! 🫶🏻
My owners manual tell me not to put e 85 in my car. Would they have to add something to the fuel system to make it run.
@@walt669 yes you need new injectors, ethanol content sensor, and probably a fuel pump and filter as well. And of course a tune to match
Only other thing I would do is a full 3 inch exhaust, ported 6.4 manifold, throttle body, and deck the heads to get to 11.5:1 compression
yup n a supercharger 🙈
How much is the full package and where are you located? Loved your video and I have a Daytona 5/7 as well, thanks
How much parts cost?
Thank you so much for the content
You just gave me more motivation to save and upgrade my 5.7
I wish you guys was closer to Detroit 😩😩
Time to get a 5.7!
i love seeing 5.7s getting modded
Best video I seen in a while. Fire
that cam chop is killer
Sounds and looks great. I have a 2021 5.7 Challenger RT Plus. I would love to do all that do it, unfortunately, I need my warranty incase something goes wrong. Mine is slightly modded w/ 3" catback exhaust and hellcat lower airbox. The dealer had no issues working with it when I took it in for claims (manufacturer error that needed to be fixed). I guess I'll just have to wait until the warranty on the motor goes out before I tinker around with the PCM and add headers.
@user-zn4tq6ib6r These aren't MOPAR parts though in the video. At the Scatpack Stage Kits aren't the preferred ways to go. I mean, not bad performance add ons, but way over priced for what you get and likely unavailable these days.
i would love a performance cam with mds 30+mpg highway is so nice
I love this channel so much
Finally. A 5.7 hemi car that could outrun my bone stock rcsb f150. Intake headers and tune have never been enough to get the job done but the cam and valvetrain work would be the ticket to beating me with no tune, no intake, and no exhaust.
N/A, Stock bottom end 5.7 Rams have been in the 10's for years now, IIRC the current fastest 5.7 N/A ram runs 10.60's, and 440/454 trucks have been deep into the 9's N/A. If more people did max effort N/A builds on the 5.7 platfom, you'd probably see the record pushed deeper. It just makes too much sense to trade it in for a used hellcat, do a couple bolt-ons and have a turn-key 8-900hp car and be done with modding.
Thanks I needed the guidelines for my build
More great work. That 5.7 is almost up to 6.4 levels. Awesome
Continue the great work of this series
Interested to see what a 6.4 or ported 6.4 manifold would add on top this all
20hp 20lb torque
Funny you say that, I have a RT getting build right now. My mod list are, custom grind cam, 392 manifold, long tube headers and custom tune. With maybe mayyyyyybe running the secret spray as well. It’s a 2019 TA so I already have an “aftermarket air intake.
so with that would be prob be a 440 who and e85 another 20hp so 460whp😂 thats possible i think and some weigth reduction
Oh yeah! That sounds real good!!
Exactly what I need
What if you get the stage 2 upgrade first and then want the stage 3 will you have to pay full price because you have half the stuff with the stage 2 upgrade just asking?
Perfect job 💪🏽
What would a complete stage 3 cost though on a 5.7?
Daaaamn i need this. And it sounds disgusting!!🔥
What all would my stock 5.7 challenger need to take a stage three cam
Just submitted a quote request for my 2019 GC!
Can you tell how much I should expect to pay for stage 2 and 3
I already have a GT for momentum, cold, airbox, and Borla attack exhaust
Would be beneficial to add a 6.4 intake and 85mm throttle body to this mix as well for more gains?
Very well done !!! Thanks !!
Such cool video hemi all the way
This is what I want to do with my 14 Charger AWD 5.7L Stage 2 Cam and tune. I have shorties on now and a cat back system. The longs is favorable. But I'll stick to the shorties for now.
How’s it going with it bro? I got the same car and about to get headers for it
Does this stage 3 work for the 5.7 challenger with the manual transmission??
Oh thank thank you. 5.7 squad.
I have a 14, so i wluldnt need the pcm etc unlocked?
I heard I have to change the camshaft and pushrods from factory stock to upgraded ones. Then this engine is going to be bulletproof. Is that true?
now do the 5th gen RAM
What the stage 3 package cost
How much would that cost to do what u just did
Stage 3 needs a high stall converter
Guys y’all? awesome 👏
is this with a stock exhaust after the hfc?
How much is this set up? Anyone know
Is that the HP going to the wheels
So after all the labor and parts how much was the cost?
Around 10k. They are doing my durango as we speak
How much does this run
What camshaft did you use?
You guys might have the baseline incorrect the RT makes 330whp
If he's using the same dyno machine, his baseline is the correct baseline for the information he's giving.
Where are u guys located
Very nice gains! 🇺🇸
Converter needed for the cam?
love it!!!
What about upgrade the throttle body
Ported intake manifold
Cnc ported heads?
Fabulous
What's the cost of something like that running and can that be installed in California?
Total cost and installation, final price?
Yes, would be interested to know.
I want this for my 392
Great video! Can you guys do a video similar to this one for the gen 2 coyote?
Yep! We've already done Gen-III Coyote, and have Gen-II Coyote on the roadmap.
th-cam.com/video/Sy3PXAsnTL0/w-d-xo.html
I have 22 392 widebody challenger I want to get worked on but yall are 4 states away from me
Similar stage 3 conversion would work on a 3,5 NA Chrysler ? Base hp 250! I would be happy for 50 extra thanks
Tbh i want to go with the 5.7 only because of the tuning potential and mods you can do with them. With the stage three package can u still daily the car and go on long road trips?
I drove my car 400 miles back home from national speed and got 23 miles to the gallon and loved it!
Mine is pretty much specd out like this (I also have ported heads, 392 intake manifold) and it still drives wonderfully and I daily it. No issues. How it will drive is really up to how good the tuner is though, not necessarily mod dependent.
@@idunno3639how much hp
@@5.7wavi 412
How much is all this out the door ?
Hey, Rob! If you could, fill out the form in the below link and we'll get you a quote. Thanks!
nationalspeedinc.com/contact/
Love it….. how much is the package
Sucks that each level of trim needs thousands of dollars put into it just to reach the stock levels of the next trim lol.
5.7 content about time.. SUBSCRIBE!!!!
What was the price all around for all this?
Does this mess with the mds or no
How much does something like stage 3 but also with a ported intake manifold and 95mm throttle body cold
can you do challenger content?
How muck does stage 3 cost? And how long does it take for installation.
What cat-back is on car, stock - aftermarket ?
for us challenger rt potatoes? these compatible
so what cam is this and specs? no ported heads or higher stall converter?
Love my 5.7 Definitely a worthy upgrade . how much is the stage 3 upgrade ?
7k
What's the price tag on this package 😊
for high mile 5.7 hemis would u reccomend replacing and forcing the crank/pistons before doing this top end work? its what i plan on doing before full sending stage 3 but i want some pro tips
Good questions, I am wondering the same for mine.
Great vid. I’ve been looking to make my ‘21 Hemi Ram faster. Does everything in stage 3 come as package? Or do I buy them separate?
What rear differential should I go with! It’s has the 262 right now!
Can we please get some 6.1 hemi stuff 😭 I own a 6.1 and I really would like to know how well the respond to engine mods
Hey guys, have you any experience with a 2017 charger pursuit 5.7 awd, column shift. 5speed. 🤞 and if yeah or nah, yall what a future project.
An I'm in nc, sooo if not you guys can you point me in a direction.
What does this package do for the 6.4 hemi power wise
So about 500 chp from the 5.7. Not too shabby. So what keeps it from revving into the 6000 rpm range? Intake manifold? Heads restrictive?
my has redline on 6250,
Can this type of upgrade be done on 5.7hemi 1500 SLT?
How much would this cost me, roughly?
Sounds better then a 392
How much does all this cost with labor?