thanks for your video, I had no idea how to change out the tub valve. Something that would help me is if you would turn to the camera and show me the part that you’re putting in. Thanks for your help!!
I had the same problem. Husband wanted to call a plumber. Found this video. So thankful to save money. Big big help thank you so much for making this.😊
You saved me a big bill from a plumber. Had already scheduled a plumber when I found your video. Ran to HomeDepot, purchased the part, replaced it and done! Thank you!
This video SAVED US!! Thank you so much! I can’t believe we were able to save hundreds by watching this video instead of needing an emergency plumber to come out!
Thank you so much for your video I with you so many videos and your was right on point explained very well and it worked for me. Thank you again for your video.
My master bathroom shower faucet was having the same issue. My family and i watched your video and followed your exact steps and shower is now fixed, we canceled the plumbing service. Thank you for sharing your video!
Thank you for your video Sir! I just replaced my cartridge and I'm looking forward to my hot shower in the morning!! I can't thank you enough for this video...
Thanks so much for your demo. It's Christmas Eve and our shower did exactly what yours did, except when I went to pull the valve out, it had snapped in half. I had to chisel out the pieces, but I was successful, thank to yo. Merry Christmas!!!
I managed to get the first half, but cannot get the new valve cartridge in. I used silicone lubricant, but the black parts on each side are not sliding with the rest of the unit and preventing it from going in. Any suggestions?
Great video! I have an issue that once I turn on the valve, it’s leaking from the back of the handle. I tried to use a hex key to open it but seems like it does not match. I can see the screw head as it’s deep and rusted. Any thought on how to open it? Thanks.
I am so sorry for the delayed response. I hope you have it solved. It's called a faucet cartridge. The I purchased is called the "MOEN Posi-Temp Pressure Balanced Shower Cartridge"
Thanks for the save. Got the part and fixed the very next morning in 10 min. (late night shower turned into a leaky nightmare). Moen 1222 was the part number i used.
Thanks Man! Same issue just now. Just like the guy below I had no idea what to do until I hit the trusty youtubes and found your video. Had it replaced in an hour including the trip to home depot.
Sorry for the delayed response. If you are talking about the black cap after taking the handle off...then I believe you will have a problem. The handle engages the black cap to turn the valve within the stem. Did you solve your problem?
Sorry for the late reply - I hope you got it solved. If you can lubricate it....then go ahead. My cartridge was really hard to remove, and I did a lot of wiggling to finally remove it. I know when I installed the new faucet cartridge, there was a lubricate in the package which helped the installation.
@@designbypeck198 Man, I had him painting the shed this weekend. He says, "Dad, no offense but I'm going to be one of those husbands who pays someone to do stuff around the house." My wife and I both LOL'd! I said, "Dude, just you wait, we have nice stuff because we do our own work. You do NOT get anywhere NEAR, what you pay for!" No offense to competent trades people! I just happen to live where quality work is hard to come by at ANY price.
I'm so sorry...I"ll add it to the description of the video. It's called a faucet cartridge. The I purchased is called the "MOEN Posi-Temp Pressure Balanced Shower Cartridge"
Sorry for the delayed response. I did not..I only used vice grips and a LOT of wiggling and muscle. It was really hard to get out. I hope it worked out for you!
There will be a shutoff valve. Some bathrooms have it on the back wall behind the shower valves. You might see a removable panel on the wall behind the shower, and if you remove that, there will be a hot and cold water valve. In my case, my bathroom didn't have one, so I needed to go into the basement and turn off the whole house water. If you don't know where to yours is, there will be a pipe coming in from outside the house, through the wall, and usually in your basement if you have a basement. This pipe will have a shut-off valve. If you're not sure where to find it, look for your hot water tank, and follow the pipe backwards where it comes into the house, and you should find it. Make sure you turn off the valve 'before' it splits between the hot water and cold water pipes. Let me know if you need more help! Chris
Thank you. You easily saved me from getting ripped off by a plumber. I bought the danco valve cause it was cheaper but it has a slow leak. I decided to buy the the Moen and will replace it and hopefully that works.
Had the exact same issue last night and had no idea what to do until I found your video…totally saved me and my family this morning so thank you!
Great to hear!
thanks for your video, I had no idea how to change out the tub valve. Something that would help me is if you would turn to the camera and show me the part that you’re putting in. Thanks for your help!!
I had the same problem. Husband wanted to call a plumber. Found this video. So thankful to save money. Big big help thank you so much for making this.😊
Glad it helped! I'm so glad it save you money. It's a big reason I wanted to do these videos.
Like everyone said...this video helped solve our issue perfectly! No plumber necessary. My husband was outta town so even I was able to fix it!
Excellent. Thank you. A life saver. I like that you showed your mistake at the end and the correction. It makes things clear. Well done.
You saved me a big bill from a plumber. Had already scheduled a plumber when I found your video. Ran to HomeDepot, purchased the part, replaced it and done! Thank you!
What’s the part called ?
@@vitalediazfamily6783 shower/faucet cartridge
This was the perfect video for my tub. Same exact issue.
I'm glad it helped!
Thank you! This video helped us in a very stressful situation and saved us a lot of money! So grateful!
This video SAVED US!! Thank you so much! I can’t believe we were able to save hundreds by watching this video instead of needing an emergency plumber to come out!
Great to hear! I love hearing I helped save people money! Congratulations!
Just experienced this same issue last night in my daughter's shower. Your video helped me fix it myself. Thanks!
You're welcome. More people have had this problem than I would have guessed!
Just ran into this problem! So thankful for this video!
Great video. I hope this will be the issue that I am having. Watching your video made my stress level drop dramatically!!! Thank you for posting.
Glad it helped! I love hearing this!
Solid thank you. Felt like a rockstar when this was done! Appreciate you and your time
You absolutely saved my butt. Thank you for making this video.
You are welcome! I'm so glad it helped!
Thanks you sir. Your video allowed me to learn my faucet and fix without hiring out. Thanks again.
You just saved my butt as well. Thanks for posting!
Just had the same problem and thanks to your video I was able to fix it myself and avoid a big plumber bill. Thank you so much!!
Great to hear! I love hearing that videos have helped!
Almost gave up until I saw this, thank you!!!
Thank you so much for your video I with you so many videos and your was right on point explained very well and it worked for me. Thank you again for your video.
My master bathroom shower faucet was having the same issue. My family and i watched your video and followed your exact steps and shower is now fixed, we canceled the plumbing service. Thank you for sharing your video!
Great to hear! That makes me so happy!!!!
Great video. I didn’t know where to start and I was going to call a plumber but then I watched it and I was able to fix mine easily. Thank you.
Great to hear! I'm so glad I helped you out!
Thank you so much for making this video! Completely saved us!!!!
I'm so glad! Thank you so much!
Thank you for your video Sir! I just replaced my cartridge and I'm looking forward to my hot shower in the morning!! I can't thank you enough for this video...
I love hearing that!!
just experienced this issue, thank you so much for the tutorial! greatly appreciated!!!
I never knew how many people have had this problem. I'm glad it helped you!
This happened to our master shower last night. Thank you so much for this tutorial video! Shower works great now.
Fantastic!
Wish I could hug you. You just saved me a ton if money.
You are a life saver thank you so much🎉🎉🎉
hi i want to thank you you help me fix my tub appreciate your video you saved me money
I love hearing this. Thank you!!
Thank you for this video. It helped me fix my shower.
Glad it helped!
Thanks so much for your demo. It's Christmas Eve and our shower did exactly what yours did, except when I went to pull the valve out, it had snapped in half. I had to chisel out the pieces, but I was successful, thank to yo. Merry Christmas!!!
I'm so glad it helped! But but WOW.....chisel out the pieces. That's bad luck! And Merry Christmas to you too!
I have three words for you...
God bless you❤
This video was exactly my scenario. Thank you! Saved me!
You're welcome!! I'm so glad it helped!
Helps a lot your video, thank you so much Sir !!!!
Most welcome!
Thank you for showing steps to do
I'm very glad it helped!!
I managed to get the first half, but cannot get the new valve cartridge in. I used silicone lubricant, but the black parts on each side are not sliding with the rest of the unit and preventing it from going in. Any suggestions?
I'm very sorry for the late response. I'm surprised it's not working. Did you check if there is any rust or foreign matter inside?
I can not get the handle to turn in order to turn the water on. Would this be the same type of fix? If not do you have any suggestions?
Exactly the same problem and set up as mine! Thanks so much!
Great video!
I have an issue that once I turn on the valve, it’s leaking from the back of the handle. I tried to use a hex key to open it but seems like it does not match. I can see the screw head as it’s deep and rusted. Any thought on how to open it? Thanks.
What is the part you bought called
I am so sorry for the delayed response. I hope you have it solved. It's called a faucet cartridge. The I purchased is called the "MOEN Posi-Temp Pressure Balanced Shower Cartridge"
Thanks for the save. Got the part and fixed the very next morning in 10 min. (late night shower turned into a leaky nightmare). Moen 1222 was the part number i used.
That's great! I'm glad it helped!
Same issue exactly. Thank you
You're welcome!
If I remove that white part and tune the water water back on will the water not come through? Trying to buy sometime
Same here, the video doesn’t tell you how to turn the water off
Thanks Man! Same issue just now. Just like the guy below I had no idea what to do until I hit the trusty youtubes and found your video. Had it replaced in an hour including the trip to home depot.
That's amazing!! I'm so happy it helped!!
Thanks for video , taking old out it broke . Ive used vice grips, pliers and atill wont come out. Ideas?
Sorry for the delayed response...it should have come out with a solid pull (not jerking pull). Did you manage to figure it out?
The same thing has happened in my shower. Thanks to your video, I should be able to handle the problem 👍
I'm so happy to hear this! I think this was an easier fix than I was expecting.
What if you don’t have the black cap? Will this cause any extra issues?
Sorry for the delayed response. If you are talking about the black cap after taking the handle off...then I believe you will have a problem. The handle engages the black cap to turn the valve within the stem. Did you solve your problem?
Gonna try this. I'll let you know how it goes.
How did it work out?
What size Allen wrench does this take. Mina all seem too small or too big
I just checked, and it was a 7/64 inch Allen wrench. Let me know if this works!
Informative, thank you.
Thank you for this
What do l do when it’s like very hard to turn of does it need to be lubricanted
Sorry for the late reply - I hope you got it solved. If you can lubricate it....then go ahead. My cartridge was really hard to remove, and I did a lot of wiggling to finally remove it. I know when I installed the new faucet cartridge, there was a lubricate in the package which helped the installation.
Know if this will work but I'm trying this on my bathtub
You are amazing! Thank you ☺️
What side Allen Wrench was that?
I don't remember offhand. It was trial and error. I hope you wre able to fix it!
@@designbypeck198 ok
What is this piece that you replaced called?
It's called a faucet stem.
Wish I would have seen this the first time this happened would have saved 600 buck .. got that piece for 38 dollars at Home Depot thank you !
Thanks man! You showed me enough to teach my 21 y/o kid how to do it himself. Money in the bank!
That is awesome! This is one of the best comments I've received. I love that a new generation is learning to DIY. Can you help me with my kids! :)
@@designbypeck198 Man, I had him painting the shed this weekend. He says, "Dad, no offense but I'm going to be one of those husbands who pays someone to do stuff around the house." My wife and I both LOL'd! I said, "Dude, just you wait, we have nice stuff because we do our own work. You do NOT get anywhere NEAR, what you pay for!"
No offense to competent trades people! I just happen to live where quality work is hard to come by at ANY price.
Thank you!
You're welcome!
Thank you, great video
Glad you liked it!
Is this how to do it when you have 3 faucets too?
I think conceptually, it should be similar, but I honestly can't say for sure unless I saw inside the faucet handle. Did you have any luck?
I search for something that's literally an emergency and I get over 5 minutes of ads. There has to be a TH-cam alternative...
Yes.. it's called TH-cam premium 🙂
Turn water off at the main and then think about what you’re going to do over a coffee or beer
You never described or named what replacement part it was
I'm so sorry...I"ll add it to the description of the video. It's called a faucet cartridge. The I purchased is called the "MOEN Posi-Temp Pressure Balanced Shower Cartridge"
Did you put anything on the valve to take it out hahah seems impossible
Sorry for the delayed response. I did not..I only used vice grips and a LOT of wiggling and muscle. It was really hard to get out. I hope it worked out for you!
How do I turn the one shower off temporarily while I get the new tube thing??
There will be a shutoff valve. Some bathrooms have it on the back wall behind the shower valves. You might see a removable panel on the wall behind the shower, and if you remove that, there will be a hot and cold water valve. In my case, my bathroom didn't have one, so I needed to go into the basement and turn off the whole house water. If you don't know where to yours is, there will be a pipe coming in from outside the house, through the wall, and usually in your basement if you have a basement. This pipe will have a shut-off valve. If you're not sure where to find it, look for your hot water tank, and follow the pipe backwards where it comes into the house, and you should find it. Make sure you turn off the valve 'before' it splits between the hot water and cold water pipes.
Let me know if you need more help!
Chris
@@designbypeck198 or you may have to turn off the water in the house from outside by your water hose. That’s what i had to do
Thank you. You easily saved me from getting ripped off by a plumber. I bought the danco valve cause it was cheaper but it has a slow leak. I decided to buy the the Moen and will replace it and hopefully that works.
Excellent! That is awesome!
You tub. At it's best ❤.
Thank you so much.
I subscribed because you helped.
Thanks for the sub! That really means a lot to me! And I'm super happy I was able to help!
This still doesn’t tell me how to turn the water off without having to keep the whole water to the house off
If you don't know what cartridge you need, this video will help! th-cam.com/video/sKqJr7uLMlE/w-d-xo.html
Thanks for the video link. Good information!!
Good job on the cartridge shitty job on the marble lol
❤
👍
Thank you!
@@designbypeck198 no friend. Thank you!
thanks
No problem