It must take forever to write the code for your CNC programs, I know how much work goes into doing something like that and I am constantly blown away by your precision work! Keep up the amazing content! I can't wait to hear that engine when its finished!!
The precison, care and attention to detail is like that of a heart surgeon. So tempting to call you Doctor. Maybe just Doc -- popular slang term. Subi Doc? Doc Subi?
This is incredible what you guys do superior quality you keep everything clean your shop inside absolutely amazing and super clean like in the hospital this is off the scale amazing You have to have at least 1 million subscribers you deserve it:-)
You gotta tell us how much a rebuild like this costs! Would love to have one in my Outback, and it's actually not that hard finding an SVX in poor shape to serve as a donor.
Hammer, schon 100k Abos! Als ich das erste Video von dir gesehen habe, hattest du 3k oder weniger o-O. Hast dich wirklich gut gemacht! Ordentlich investiert hast du auch. Mach weiter so!
Pretty sure the white cooling fluid is the same stuff that came out of the android character Ash in the original Alien film after he gets his head knocked off
Hi there. I am a machinist by trade but never seen that tool with hanging arm. During that process is the machine automatically finding the center of the bore?
Thats going into a BRZ to race at the Endurancerace-Championship at the Nürburgring, Tim Schrick is the Head of that Team, or google for "knatterheidi"
Torque plates should have been used for boring and honing the cylinder to simulate tension placed on the sleeves... willing to bet this engine burns a good bit of oil ....
Estoy en México y en un taller particular me hicieron un ajuste de un Subaru Legacy 2006 2.5 GT turbo porque se rompió un cilindro Y no el auto sólo había recorrido 105,000 km es posible esta falla le habrán hecho todo este procedimiento a mi auto
Werkzeuge beim Vermessen linksrum laufen lassen ;) Edit: Für die Werkzeuglänge, wie im Video gezeigt, muss die Spindel sich überhaupt nicht drehen. Bei der Durchmesser Vermessung linksrum. Sonst top!
The end is eye candy! Love your channel and handful of information plus no annoying stupid music.
The end was amazing
The way you said " thank for 100k sub" is gorgeous 🤩🤩🖤🔥 100% love it
Congratulations for getting 100k subs. Still love this channel!!!
Красавчик!!! Мне б один мотор собранный твоими руками! Молодец...обожаю твои работы
I always watch these videos before to go to bed, very relaxing and interesting 👍
This channel is awesome, well done on 100k subscribers.
It must take forever to write the code for your CNC programs, I know how much work goes into doing something like that and I am constantly blown away by your precision work! Keep up the amazing content! I can't wait to hear that engine when its finished!!
It looks more complicated than it is. You can make a CAD Draw and sent it to the machine, just control the tools and the let her eat
Geile Nummer!! Hätte auch nie gedacht dass der Motor für die Knatterheidi ist 😍 #proudofboxer #stolzaufboxer
Oh, was für eine Ehre, dass wir auf deinem neuen Spezialwerkzeug verewigt sind
Such wonderful toys - so viele schöne Spielzeuge!
Even though I'm a toyota lover, you just have it when it comes to mechanical craftsmanship, on to a million, from nitro West Virginia USA..
The precison, care and attention to detail is like that of a heart surgeon. So tempting to call you Doctor. Maybe just Doc -- popular slang term. Subi Doc? Doc Subi?
Germans and Japanese are very precise.
Tad Ficus Catus and Subaru is their love child
back when I did an EG33 I found power by porting the heads & stock exhaust manifolds, they flow well if not building headers.
All this tech perplexes me to the core.
Those cylinder heads are beautiful...
This is incredible what you guys do superior quality you keep everything clean your shop inside absolutely amazing and super clean like in the hospital this is off the scale amazing
You have to have at least 1 million subscribers you deserve it:-)
8:30 Oh what a beautiful milling machine.
You gotta tell us how much a rebuild like this costs!
Would love to have one in my Outback, and it's actually not that hard finding an SVX in poor shape to serve as a donor.
They're everywhere.. I'm tempted to pick up a block for once my WRX pops
Hammer, schon 100k Abos! Als ich das erste Video von dir gesehen habe, hattest du 3k oder weniger o-O. Hast dich wirklich gut gemacht! Ordentlich investiert hast du auch. Mach weiter so!
одно удовольствие,а не работа)
Pretty sure the white cooling fluid is the same stuff that came out of the android character Ash in the original Alien film after he gets his head knocked off
its armor all
Daaaanke lieber Andi für wunderbare 5 sek und einen coolen Film danach.. 😬😬🤩
Liebe Grüße nach Troisdorf.
I subscribed for the 6 cylinder. I stayed for the everything else. Keep up the good work. I am super excited to see what you do with the 6.
how does this channel not have more subs?!?!
Bloody awesome!!!!!!!!!!!!!! If i lived near you, i would own a subaru for sure.
This is better than listening to classical music
YOU ARE WELCOME!!! And that torque plate is totally sick... I wish I could play in your shop.
0чень круто.. посмотрим сколько русских смотрит)
Или россиян)
@@alimmmlikhovvv5521 Соглашусь))
@@alimmmlikhovvv5521 сссрян
took me by surprised at the end ! congratulations!
cant wait to see the finished product!!
nice ending, well done!
Congrats man, you deserve it!
and thank you for making such a great content ❤❤
Cool torque plate! Keep up the hard work!
Thank YOU for great work :)
Herzlichen Glückwunsch zu den 100000 Abonnenten
So correct me if i am wrong but rebuiling an engine is basically adding sleeves in the cylinders for new pistons and rods ?
Congrats on 100K!
Hi there. I am a machinist by trade but never seen that tool with hanging arm. During that process is the machine automatically finding the center of the bore?
Thanks for making videos and sharing your knowledge
Muchas gracias por su paciencia y tiempo
Fantastisch 👌🏽 Love your work guys
the way the coffee came out made me cry
Fantastic fantastic.
You are the man.
I need an EG33 torque plate. Excellent video. I am so excited to see this finished engine. What is it going into?
Racing BRZ of Tim Schrick, competing in the vln series on the nurburgring.
...in about 6 hours, you/we can see this on Nürburgring! *hell yeah* I can´t sleep!
Awesome video, thanks 👍😁
Congratulations!
i hope i was 100,000th subscriber i’m gonna need eg33 torque plate real soon
Andy what do you think about Porsche engines flat six?
Cool. I was wondering what happened with this engine.
Thats going into a BRZ to race at the Endurancerace-Championship at the Nürburgring, Tim Schrick is the Head of that Team, or google for "knatterheidi"
@@TougeTouring Thanks. 👍👍
I got me one of them there EG33,s. It an'it a custom built but she's a runner, yup.
Mehr von dem Motor bitte!!!! 😊👍🏼
Whow. a 100K subs. congrats.
oh yea 100k congrats:-)
4:11 Tool crash, or broke the insert?
crash 😅
@@SubiPerformance gotta love 'learning experiences'... 😬
И тебе от души братан!
ever do an aircraft conversion of an H6 ?
What will be the engine capacity after being bored out?
Which car to install? STI?
Интересно, а сколько стоит у вас сделать EG33 под 97 поршень с полным ребилдом?
Finally 🤩❤️
Congrats, love your work from Australia.
Thanks
Excellent
Well done.
Yeahhh ! THX YOU
What car do you own Andy?
subaru outback 2019 😅
@@SubiPerformance Oh LOL
Nothing’s impressive me as I’m engine rebuilder too but u did a good job btw 👍
Wie sagen noch gleich die Maurer,"Zentimeter ist kein Maß"
Wie sagt Andi,"Millimeter ist ne halbe Weltreise" 😉
why not ez36?
Torque plates should have been used for boring and honing the cylinder to simulate tension placed on the sleeves... willing to bet this engine burns a good bit of oil ....
New video is out!
Me: like first
Also me: watch later
Also me after me: watch now everything else later 🤣🤣🤣
nice!!!!
How much is that machine worth?
bei 4:12 Kampfspuren an der Maschine ... wo gehobelt wird fallen Späne!
10:54 we need some milk
Estoy en México y en un taller particular me hicieron un ajuste de un Subaru Legacy 2006 2.5 GT turbo porque se rompió un cilindro Y no el auto sólo había recorrido 105,000 km es posible esta falla le habrán hecho todo este procedimiento a mi auto
You should add (S) at the end of subscriber
Because that makes it plural subscriber means on one nice video RIP SVX
Look at me talking lol no punctuation
Жму руку
Yeah real good idea... honing plate
Measure 10 times cut once!
11:05 gern geschehen 😁
0:00 Kaffee am Morgen vertreibt Kummer und Sorgen.
Die Tasse ist aber schon etwas klein, in der EDV würdest du damit nicht weit kommen 😊
😮👍👍
Werkzeuge beim Vermessen linksrum laufen lassen ;) Edit: Für die Werkzeuglänge, wie im Video gezeigt, muss die Spindel sich überhaupt nicht drehen. Bei der Durchmesser Vermessung linksrum. Sonst top!
lief doch linksraum außerdem macht die maschine autom.
Why walk all the way out to the shop with the expresso, only to drink it and slam it down. Haha
No, Thank You!
D a n k e...
👌 (y)
Mega Geil 🥰😍🥰
*MAGA
Blasser 735....is clear. Not milky.
subscribers ... s ... bröther :D
😉👋💪
habe mehr erwartet, aber geil
ここまで期待を引っ張って！どうするつもり？
Fucking Good
Издевается перфекционист)))
🇮🇲🏁