Блин,в этот меч столько души вложено,труда и пота.Меч достойный Короля!Наверное Ескалибур создавался с такой самоотдачей.Скорее втрого такого меча творец этого шедевра не захочет повторять,сколько сил отдал,терпения-настоящий мастер Мечей!!!
And the scabbard/ sheath? I'm sure that is on the next video 😉. Beautiful workmanship (as usual 👍🤙)! My bad, I probably should have watched the whole video 1st 😬
e possível forja um aço damasco usando pouco calor e usando uma prensa hidráulica pra fazer as camadas se ajustarem apenas com pura força bruta do atrito ou isso e impossível
WOW. I almost cried after seeing the sword completed, and you just kept going with the pommel, hilt and sheathe. Amazing. Why did you use the drill at 7:45?
drilling shallow holes while forge welding removes portions of the top layer, and leaves the dark and light contrasted metals on the surface as he pressed it back to smooth.
@@insertcoolnamehere_1 A little bit of both. The damascus ensures the different colors as the different steels all have slightly different finishes. But the drilling ensures the shape, that's why the circles or ripple like patterns are on the finished product. You likely would still get a pattern without drilling, but it'd be more like random squiggles that you see in other damascus blades as opposed to the neat patterns he gets from drilling.
Freerk, I've watched you bladesmithing for years, and I see you constantly use flux or borax on your forging of steel. Many American ABS Blacksmiths say that you don't and should use flux. What is the real truth in this question?
Вы красиво работаете , а органы дыхания не всегда защищаете .лигирующии компаненты при ковки , дум от отпуска -закалки и так далее , эти пропуски хорошим не закончятся .
My ophthalmologist says I can no longer watch your videos on my phone, not even in a brightly lit room, because the sudden close-ups to unbearably bright welding. Seriously, you're wearing protection, but us viewers experience those moments unfiltered like light-based jumpscares, and even turning the brightness of our screens down doesn't do much to block it. Love your work, love your videos, but dimming the welding (like other smiths do on their respective channels) might be a good idea 😵
![The Most Dangerous Tool I've Restored [Restoration]](http://i.ytimg.com/vi/fJY0P5aL5dg/mqdefault.jpg)
Love your work your silence speaks volumes....nothing is more satisfying that seeing your hands do the talking👍
Первый лайк 😊. Всегда с удовольствием смотрю ваши видео, вы безумно талантливый.
It’s a battle cruiser. I love it veddy nice
Oh and congratulations on 500,000 + subscribers.
Immaculate. Masterful as always Freerk
Блин,в этот меч столько души вложено,труда и пота.Меч достойный Короля!Наверное Ескалибур создавался с такой самоотдачей.Скорее втрого такого меча творец этого шедевра не захочет повторять,сколько сил отдал,терпения-настоящий мастер Мечей!!!
You are just the best love watching your videos
gorgeous work
That blades sings at the end. Art, Just Art.
Beautiful work! I shall buy it and have it at the ready to demand satisfaction from the next fool to speak to me before I’ve had my coffee.
Этот целый цех! Как же наши предки обходились без всех этих приспособлений и изготавливали не менее замечательные вещи?
Love the way you design your swords.. its like they are from the medieval era
Beautiful. Shared. Thank you.! 🤑
Very nice 👏🏽👏🏽
Always wanted to see somethin like this thatz fire
Очень красивая штука, как обычно. Приятно смотреть на вашу работу.
The video was excellent as well 👍👍
Perfection!!
😮😮😮
Всегда прекраснаые мечи!
Esse aí é caprichoso! Sem dúvida o melhor ferreiro do TH-cam 🇧🇷
Beautiful
Фриирк всегда делает произведения искусства..
And the scabbard/ sheath? I'm sure that is on the next video 😉. Beautiful workmanship (as usual 👍🤙)! My bad, I probably should have watched the whole video 1st 😬
wonderful and nice sword❤❤
absolutely stunning build, the twisted wire wrap handles look so good
Just so amazing
beautiful sword Freerk
e possível forja um aço damasco usando pouco calor e usando uma prensa hidráulica pra fazer as camadas se ajustarem apenas com pura força bruta do atrito ou isso e impossível
Крутой меч...респект мастеру.
Beautiful!
Un hermoso trabajo 👍
Could you make a set of garden tools with railroad spikes?
He even makes pattern weilded scabords!
1:17:48 that sound is pure bliss
Necesito comprar una Ya
Absolutely incredible work my friend! Talented! What’s something like that sell for?
big sword cool
what is that new makers mark ??
Muito lindo ver oseu trabalho! Eu faço minhas artes em tecido.Iraci e sua artes no TH-cam.
WOW. I almost cried after seeing the sword completed, and you just kept going with the pommel, hilt and sheathe. Amazing.
Why did you use the drill at 7:45?
drilling shallow holes while forge welding removes portions of the top layer, and leaves the dark and light contrasted metals on the surface as he pressed it back to smooth.
To create a pattern. Aside from folding it multiple times its the primary reason he gets the pattern that shows after acid etching.
@@tharalter Is the pattern only because he did the drilling or is it because his chosen material is damascus?
@@insertcoolnamehere_1 A little bit of both. The damascus ensures the different colors as the different steels all have slightly different finishes. But the drilling ensures the shape, that's why the circles or ripple like patterns are on the finished product. You likely would still get a pattern without drilling, but it'd be more like random squiggles that you see in other damascus blades as opposed to the neat patterns he gets from drilling.
@@tharalter Ahh makes sense, and would the drilling alone give any patterns?
Freerk, I've watched you bladesmithing for years, and I see you constantly use flux or borax on your forging of steel. Many American ABS Blacksmiths say that you don't and should use flux. What is the real truth in this question?
more making then forging but still very very good
Is there's place to look at your finished work for buy..?
Вы красиво работаете , а органы дыхания не всегда защищаете .лигирующии компаненты при ковки , дум от отпуска -закалки и так далее , эти пропуски хорошим не закончятся .
Is there a practical purpose for a horizontal "S" guard?
Ok, this has been bugging me for a while now and I just have to ask. Why do you drill those divots into the billet?
To create a pattern. Aside from folding it multiple times its the primary reason he gets the pattern that shows after acid etching
@@tharalter Much appreciated. I was really curious about that.
Cuanto venderías una cosa así?
I'm looking for a full suit a rack for it and a few personal sword's that are for training.. That's the way i"m atemping to go with my self..
🧑🏭🇺🇲
Beauté mortelle, des braves se seraient damnés pour elle afin de garder leur vie dans le hachoir .
My ophthalmologist says I can no longer watch your videos on my phone, not even in a brightly lit room, because the sudden close-ups to unbearably bright welding. Seriously, you're wearing protection, but us viewers experience those moments unfiltered like light-based jumpscares, and even turning the brightness of our screens down doesn't do much to block it. Love your work, love your videos, but dimming the welding (like other smiths do on their respective channels) might be a good idea 😵
Can you do the Kampilan? Thanks!
Beautiful