A good high quality arrow squaring device better than the G5 one...something like the one made by Firenock. And a good quality saw/ saw blade. The saw blades that came with my weston 8k rpm were super wobbly and they made it so no matter how much i tried and adjusted the blade, the cut would be super sub par! I love tinkering and super proud to build my own arrows and take pride in it but a 180 dollar saw should come with straight blades at least! Made it very inefficient to build and square, then fletch 12 arrows. Im not running a shop, that saw and those blades should work well. Wondering if theres anything im missing or just a better brand and material blade
Glad I made the right choice with the trinity pro! Can anyone go out and have MFJJ super tune their bow? I’m seriously considering a flight to Spokane for this.
Hey Dan any chance you can get me a product link or number for the replacement part you tie the cord to for the Mathews bows? My bow shop is lost when I ask them about it! Thanks Jose
I set my Hamskea up using a prussic knot. Easy to adjust in the field and I don’t have to buy any extra little parts to make it work. Cord tension stays the same.
I'm a millwright which precisely works on rotating equipment. This is the rest I just switch to from a biscuit. like someone else said, I tried a prussic knot to the string to make it easy for adjusting. Good video fellas.
My Primer developed a creak when I drew my bow so I exchanged it for the Trinity Pro and haven't looked back. Going forward I will never use another rest. If you're on the fence because of the price, it's an investment you won't regret.
Perfect timing as I'm about to buy a new bow and was looking at the hybrid... MFJJ convinced me to go with the trinity! Thanks guys for another great video!
Have used QAD, Vaportrail, and several others and I have been using Hamskea for almost two years and absolutely love it! The adjustability is second to none and like you guys say, it’s been bullet proof! Can’t recommend the Hamskea high enough!!
You guys are my go too for everything archery. New to archery and just got a V3X set up with an Epsilon. Started to regret it when the tech I bought it from was kind of trashing it. Same thing with the guy who tuned it. Figure everyone has their opinion and that’s okay. Really appreciate both of your reviews!
I had pretty noticeable clank from trinity. Not hitting riser or anything, just the internal stopper. Bow is V3 and cord tied to the bracket. Tried setting the tension looser until the rest wasn’t even getting fully down but it moves so fast it would still clank. Ended up sticking tiny bit of rubber foam under the blade which stops the blade just before the internal stopper and it became dead silent.
I went from the QAD to the Hamskea Trinity put on my V3 31. Liked it so much I put one on my Creed. What I really liked is how the rest arm is supported in 3 different locations plus I feel it is more protected. Also put the Hamskea Raptor peep on both bows really like them as well.
I had to switch from trinity to a hybrid pro because that fancy bar that you can hammer nails in with crashes into the back of my bow hand. Hybrid fixed it right up.
That’s an issue with how you are gripping the bow. I had the same issue when I got my trinity target pro and I tinkered with my grip and it fixed the problem immediately.
Great rest and imo the best also. Few things I do is if there are 2 berger holes I put a stainless set screw in front berger to prevent rotation. I have found the screw in the main head mount to be short, actually had one to strip the thread. Suppose to have 1 1/2 x the screw diameter. Hamskea replaced it no problem. For the heavier arrow builds I have to increase the spring tension that controls the lift for the launcher. As far as the chord location on the limb, I start towards the end of the limb shooting through paper with a high tear usually and move chord forward til tear is gone. Great review, keep the vids coming.
Love my Hamskea Trinity (managed to get it on sale for $150 so was extra stoked about that.) -- also shoot a Raptor Peep and use their Mathews Cord Attachment Bracket -- makes for a super clean look and you don't have to stick anything to your limb.
Bringing the heat i love it!! I have a Nock On/AAE elevate 2.0 but i have been wanting a trinity pro for about a season now and this just solidified my questioning and change x10
@@pemborsky its a good rest but if i had to buy again id buy the Hamskea Trinity Hunter. Or now the new Epsilon by them. Ill probably be putting that epsilon on my new bow build. I came from a trophy taker smackdown pro before that Elevate 2.0…always have and will have some type of Limb driven rest
rest is solid. well built and will not break easily. has color options to match your bow. easy to install. I have this on a Mathews Vertix and since this rest is on the large scale, the side touches the arrows that is placed on my two piece quiver. a washer for the quiver might fix the problem to space it out more but I've never tried. it's not a huge deal but something to think about. i still shoot it as is and it's fine.
I plan on buying this rest (Hamskea Trinity Hunter Pro ) for my Mathews VXR bow with 2 piece quiver. Has anyone had any clearance issues on their Mathews bow using the Mathews 2 piece quiver? I just want to be sure I won't have this problem before I buy.
I use and highly recommend Vapor Trail Gen 7x's...and with my recent customer service experience with them concerning a rest I practically destroyed (my own fault and was compleately honest with them) I will be shooting them for the foreseeable future...
Welll gees this vid made it real easy to decide whether hunter pro or the trinity. I have to wait until hamskea makes more left hand rests. After that arrow builds.. cheers guys
To be honest if you can get the hybrid pro cheaper and it's easier to find buy that one you won't notice much of difference other then looks have both and have no bnb problems with either my hybrid has way more shots through it now using it 3 years now zero problems and that bar doesn't move that holds the whale tail so to me the 3rd bearing isn't necessarily needed is it better ya but the rest is so over built to begin with you dont need to worry so save 40 bucks and put it to something else like arrows
Love my Trinity Pro. My advice for Hamskea to improve their product: replace the screws with inox or titanium ones. The Trinity is durable and built like a tank, but the screws rust a bit after a few months.
Love the trinity only think I'd like to see on it is something like on the qad mxt where each mirco adjustment is a click and the excat adjustment everytime
@@RugerNuger defently trick about it you cant loosen that nut too much because it will just wiggle too much you just have it a little tight but the micro clicks defently would just eliminate that problem all together
When you're right you're right just got my Trinity love it and as you say solid and reliable the only thing I cannot do is lower the launch arm I know that are two screws underneath the front one drops it down the real one raises I can raise it but I cannot lower it please can you help me love the video keep up the good work lads , stay safe keep shooting regards Milo
Wow, Josh must have been drinking the same coffee as Dan was in South Dakota. What was that...Black Rifle?? Thanks for the video. I shoot a QAD right now and have had no issues but wouldn't mind checking a Hamskea out seeing that it is limb driven rather than cable. I like the fact that with the QAD I can flip the rest up to secure a nocked arrow as I move around. Does the Hamskea allow that as well (full capture)? I really dig these videos you have putting out with Josh. They are really helpful with expanding my knowledge about all things archery.
Well dam, I've been thinking about hamskea but now I'm going to have to pick one up. I know this video is mostly about the Trinity but what would you get now with the Epsilon out? I'm still running the Halon6.
Curious what kind of backpack you're hauling your bow in on your dirtbike riding single track? I'm planning on being on my bike as well and have been putting thought into the best bag to carry in a way where it's mounted high enough to not be hitting my seat. Many thanks for any intel
I can't speak to bulletproof, but my stainless steel release slipped at full draw (60#), hit my Trinity and flew 10-15 yards behind me. It put a divots in the two moving parts on the far right of the rest, but it still adjusts flawlessly. I suspect that if it hit the support arm it would have bent it.
I have a Hamskea trinity and each time i shoot it starts making a clicking noise when I draw. I am constantly tightening the cord that’s attached the limb and it helps for a few shots then starts clicking again. Any pointers ?
would you be willing To do a in depth review comparison between different limb driven rests like the trophy tracker, vapor trail gen 7x, and the trinity hunter pro? or why you should choose a limb driven over cable or over none mechanical rest(whisker biscuit is the only one I can think of)?
The part that's connected to the spring does that have a screw that holds it down or does is just freely slide on and off? I'm wondering cause that came undone when I was shooting my bow the other day and was not sure if there was a screw holds it in or not.
I need to take a drive east and have you help put that rest on my bow hahah. Late Washington elk and deer season my rest failed to stay back a few times because it so so cold I believe.
It wasn't your rest it doesn't work good in cold wet environment it won't pick up all the way. Everybody loves gadgets but it cost me a bull elk hit low. Went back to camp shot for 30yrds hot the dirt. Wasn't the tensioner cord either.
Waiting on a V3 to show up to install a Trinity onto it...what position do you recommend when mounting to the bow, as far forward and back? Forward flush against the riser? Thanks.
On the hamskea and it's being easily adjusted as in @7:50 do you think that's just from wear and tear that moves that cord adjustment, or getting bumped and scraped? Or is it by nature of the design of the metal clip and rubber o ring that from time to time thats just what you have to do?
NEED HELP!! I am using bear species bow. I have a shoot draw 25”. I have the biggest peep sight I could buy. Running trophy ridge h4 react sight. I cannot see the yellow markers or level thru peep. I can only see sight pins. I am ok on accuracy but after missing a giant buck this I tested it hard and noticed I am very inaccurate. I feel it is because I am not centering my pins correctly. But it is hard to do when I can’t see the outer ring.
Is that attachment piece for the limbs only for Mathew’s style limbs and bows? I currently have the limbsaver rubber piece and knot attachment going on, on my Rx-1
I believe they make them for all bows also but the one you screw into the limb is only for Mathews I believe but on there website they have different options like where it's 2 plates that sandwich onto the limb to clamp it for sale
@@mustang268 thanks, do you think this contributed to a lot of wear on the d loop material? Thats why ive always went away from the clamps that come with some limb driven rests
So after watching this unfortunately my pro shop sold me the hunter version. ? I have 6 inch brace expedition and use elk shape vanes. The vanes rest on rest in sitting position. Is that just the case with a 6 inch brace height? I have rest moved up as far as I can.
ihave the same "problem" but after slowly letting the bow down i saw that the fletching wont contact the launcher arm when firing due to the launcher arm being fully depressed 90% through the shot.
Only thing i don’t like about my hamskea rest is that its a tight fit on my ventum 30 from being bulky, its a trade off for being tough. Shoot whatever you like and familiar with
I’ve been eyeing a target version with the flat blade. Problem is, they cost too much for me. I’m gonna have to go with a manual adjust launcher for about $50. Another one I was looking at for my target bow was a Trophy Taker that had click adjust For windage and elevation where each click was equal to .001”. It was cheaper than the Hamskea, but I still cannot afford it. Everything is through the roof on prices. This year will be tough for all archery shops and golf ships and everyone else. They want a fortune for something that does not shoot any more X’s than bows and equipment from 30 years ago. You guys are hunters and can’t have your equipment fail, but where to regular guys get their money for these super expensive gadgets?
Trophy Taker are crap my Lock up blew up on me less then 50 shots and actually when drawing the bow the launcher arm goes in reverse now, their quality has gone to hell the past couple years. How’s the Hamskea for spot and stalk? 90% of my hunting is spot and stalk for hogs in the swamps here in coastal SC. I’m looking at the Trinity and the Vaportrail Gen7X for my Xpedition MX16.
@@miguelcooper10 I ended up going back to QAD as my hand to grip On my Darton causes the bottom of limb driven rests to rub horribly on my hand. I have a few friends that do use the Trinity and LOVE LOVE it!
@@BowHunter74 I got the trinity a few weeks ago and it’s pretty nice👍🏽. My groupings are so much better with the trinity than with the whisker biscuit.
Any other gear you'd like us to test/review/talk about?? Happy Monday, crush your week!
A good high quality arrow squaring device better than the G5 one...something like the one made by Firenock. And a good quality saw/ saw blade. The saw blades that came with my weston 8k rpm were super wobbly and they made it so no matter how much i tried and adjusted the blade, the cut would be super sub par! I love tinkering and super proud to build my own arrows and take pride in it but a 180 dollar saw should come with straight blades at least! Made it very inefficient to build and square, then fletch 12 arrows. Im not running a shop, that saw and those blades should work well. Wondering if theres anything im missing or just a better brand and material blade
Glad I made the right choice with the trinity pro! Can anyone go out and have MFJJ super tune their bow? I’m seriously considering a flight to Spokane for this.
Hey Dan any chance you can get me a product link or number for the replacement part you tie the cord to for the Mathews bows? My bow shop is lost when I ask them about it!
Thanks Jose
@@tree_monkey3120xp go to Hammskea’s sight and search for limb cord attachment bracket or a simple google search you should find it right away
Sights, and stabilizer set ups. Like/dislikes. The W’s!
Let Hamskea know that I bought the Trinity 3 days after watching this video.
Even though I didn’t want to.
Love it... Thanks.
I set my Hamskea up using a prussic knot. Easy to adjust in the field and I don’t have to buy any extra little parts to make it work. Cord tension stays the same.
Same
MFJJ !!!! Honesty is refreshing. We are coming to the channel for this stuff right here!!
After watching you guys run these things this past season, I had Santa drop me off a Trinity this winter for my VXR. I freaking love it!
Passion speech on a worthy product! Love it.
I'm a millwright which precisely works on rotating equipment. This is the rest I just switch to from a biscuit. like someone else said, I tried a prussic knot to the string to make it easy for adjusting. Good video fellas.
Got a trinity last year, all I’m buying now 🤘🏽
The duo we didn’t know we needed! Love the content boys 🙏
My Primer developed a creak when I drew my bow so I exchanged it for the Trinity Pro and haven't looked back. Going forward I will never use another rest. If you're on the fence because of the price, it's an investment you won't regret.
Excellent point on the rests! Thanks for the honesty and insight!!!!
I felt personally attacked when he threw the hybrid hunter pro on the ground.
Me too. They are what I have on 3 bows!!
The Hybrid Pro is great.
I just bought one the other day😭
Hi, because of this two guys I returned the QAD HDX and bought the Trinity! Waiting for my new bombproof rest 😁
Thank you for the advice...
Perfect timing as I'm about to buy a new bow and was looking at the hybrid... MFJJ convinced me to go with the trinity! Thanks guys for another great video!
Have used QAD, Vaportrail, and several others and I have been using Hamskea for almost two years and absolutely love it! The adjustability is second to none and like you guys say, it’s been bullet proof! Can’t recommend the Hamskea high enough!!
You guys are my go too for everything archery. New to archery and just got a V3X set up with an Epsilon. Started to regret it when the tech I bought it from was kind of trashing it. Same thing with the guy who tuned it. Figure everyone has their opinion and that’s okay. Really appreciate both of your reviews!
🙏🙏
I had pretty noticeable clank from trinity. Not hitting riser or anything, just the internal stopper. Bow is V3 and cord tied to the bracket. Tried setting the tension looser until the rest wasn’t even getting fully down but it moves so fast it would still clank. Ended up sticking tiny bit of rubber foam under the blade which stops the blade just before the internal stopper and it became dead silent.
Same for mine. I have it setup on the vxr and it has a noticeably loud slap.
I went from the QAD to the Hamskea Trinity put on my V3 31. Liked it so much I put one on my Creed. What I really liked is how the rest arm is supported in 3 different locations plus I feel it is more protected. Also put the Hamskea Raptor peep on both bows really like them as well.
Try the pxl hunter peep. That thing is the best peep I’ve run.
I had to switch from trinity to a hybrid pro because that fancy bar that you can hammer nails in with crashes into the back of my bow hand. Hybrid fixed it right up.
That’s an issue with how you are gripping the bow. I had the same issue when I got my trinity target pro and I tinkered with my grip and it fixed the problem immediately.
Great rest and imo the best also. Few things I do is if there are 2 berger holes I put a stainless set screw in front berger to prevent rotation. I have found the screw in the main head mount to be short, actually had one to strip the thread. Suppose to have 1 1/2 x the screw diameter. Hamskea replaced it no problem. For the heavier arrow builds I have to increase the spring tension that controls the lift for the launcher. As far as the chord location on the limb, I start towards the end of the limb shooting through paper with a high tear usually and move chord forward til tear is gone. Great review, keep the vids coming.
Love my Hamskea Trinity (managed to get it on sale for $150 so was extra stoked about that.) -- also shoot a Raptor Peep and use their Mathews Cord Attachment Bracket -- makes for a super clean look and you don't have to stick anything to your limb.
Bringing the heat i love it!! I have a Nock On/AAE elevate 2.0 but i have been wanting a trinity pro for about a season now and this just solidified my questioning and change x10
Do you mind giving your thoughts on the Elevate?
@@pemborsky its a good rest but if i had to buy again id buy the Hamskea Trinity Hunter. Or now the new Epsilon by them. Ill probably be putting that epsilon on my new bow build. I came from a trophy taker smackdown pro before that Elevate 2.0…always have and will have some type of Limb driven rest
@@Orr_s lemme know if you ever wanna sell the Nock On
@@pemborsky sounds good dude
Would you go with the Trinity... or the new Epsilon?
rest is solid. well built and will not break easily. has color options to match your bow. easy to install.
I have this on a Mathews Vertix and since this rest is on the large scale, the side touches the arrows that is placed on my two piece quiver. a washer for the quiver might fix the problem to space it out more but I've never tried. it's not a huge deal but something to think about. i still shoot it as is and it's fine.
I plan on buying this rest (Hamskea Trinity Hunter Pro ) for my Mathews VXR bow with 2 piece quiver. Has anyone had any clearance issues on their Mathews bow using the Mathews 2 piece quiver? I just want to be sure I won't have this problem before I buy.
I dropped my bow off at Spokane valley archery to get new strings and ready to get it back and shooting again
Hamskea makes a great product and they have great people behind it.
Oh yea! Also if you need a boat anchor the trinity is great! Jk it’s a good rest, a lot of people have a problem with it hitting their hands
Are you guys going to do a review on the new Epsilon when it comes in?
video drops next week
I just had a ripcord loc fail today man I might need to upgrade
I use the hunter hybrid and the raptor peep. Love them both!
So is that tossed hybrid half off?
I'm running the Trinity on my Prime Black 3 and have found it a great shooting rest; as bullet-proof as Spot Hogg sights
I use and highly recommend Vapor Trail Gen 7x's...and with my recent customer service experience with them concerning a rest I practically destroyed (my own fault and was compleately honest with them) I will be shooting them for the foreseeable future...
Welll gees this vid made it real easy to decide whether hunter pro or the trinity. I have to wait until hamskea makes more left hand rests. After that arrow builds.. cheers guys
To be honest if you can get the hybrid pro cheaper and it's easier to find buy that one you won't notice much of difference other then looks have both and have no bnb problems with either my hybrid has way more shots through it now using it 3 years now zero problems and that bar doesn't move that holds the whale tail so to me the 3rd bearing isn't necessarily needed is it better ya but the rest is so over built to begin with you dont need to worry so save 40 bucks and put it to something else like arrows
Great video that will be my next rest Thank you
Just bought myself a Hamskea Primer today for the sole purpose that MFJJ says so period end of discussion.
3:39 glad I bought that rest and then listened to this afterwards 😂😊
Love my Trinity Pro. My advice for Hamskea to improve their product: replace the screws with inox or titanium ones. The Trinity is durable and built like a tank, but the screws rust a bit after a few months.
Thank you! Decision made strictly because of this vid!
Not a Mathew’s guy at all . I love PSE BUT you guys have awesome content and I love all the info and videos from Elk Shape
Definitely switching to a Hamskea Trinity soon. The guys at my local pro shop all shoot them and swear by them. They’re just bulletproof and reliable.
Just watched your video review. Great video guys!
As always great videos and why I am going to a hamskea on my new bow!
if dan can adjust it, then I can adjust it. picking up a trinity real soon!
Love the trinity only think I'd like to see on it is something like on the qad mxt where each mirco adjustment is a click and the excat adjustment everytime
True would make it that much easier to tune
@@mustang268 it's not hard but wouod really just add that finnse to the trinity and truly make it the best rest in the world
@@RugerNuger defently trick about it you cant loosen that nut too much because it will just wiggle too much you just have it a little tight but the micro clicks defently would just eliminate that problem all together
I agree would be really nice who we gotta talk to in hamseka to get it done !!
@@RugerNuger another thing is a direct mount to the riser like on the newer bows like mathews and hoyt has with the qad integrate system
just ordered a trinity , thx josh and dan
When you're right you're right just got my Trinity love it and as you say solid and reliable the only thing I cannot do is lower the launch arm I know that are two screws underneath the front one drops it down the real one raises I can raise it but I cannot lower it please can you help me love the video keep up the good work lads , stay safe keep shooting regards Milo
This channel is going to be huge at some point very nice content
I have a Hybrid Hunter Pro. 😢
Same, when he threw it :(
I just bought one, right before I watched this video 😭
Trinity is where it’s at
Wow, Josh must have been drinking the same coffee as Dan was in South Dakota. What was that...Black Rifle?? Thanks for the video. I shoot a QAD right now and have had no issues but wouldn't mind checking a Hamskea out seeing that it is limb driven rather than cable. I like the fact that with the QAD I can flip the rest up to secure a nocked arrow as I move around. Does the Hamskea allow that as well (full capture)? I really dig these videos you have putting out with Josh. They are really helpful with expanding my knowledge about all things archery.
Im still running a smack down pro, you have me thinking, I was looking at the Trinity
I ordered a hybrid hunter pro micro ajust
Will the hamskea universal mount still fit on a mathews phase 4 or do you need the mathews bracket?
Have you installed a hamskea on a Hoyt Ventum 33? I couldn’t get my center shot perfect with the thick riser of the ventum.
Yeah! I'd say if Vapor Trail didn't make the Limb Driver Hamskea would be the best! 😁👍
MFJJ!! 😂 love his no bull shit explanations
Devin hall of Hamskea says not to use the Mathews limb bracket on the v3s due to the limbs being past parallel.
Well dam, I've been thinking about hamskea but now I'm going to have to pick one up. I know this video is mostly about the Trinity but what would you get now with the Epsilon out? I'm still running the Halon6.
Curious what kind of backpack you're hauling your bow in on your dirtbike riding single track? I'm planning on being on my bike as well and have been putting thought into the best bag to carry in a way where it's mounted high enough to not be hitting my seat. Many thanks for any intel
I can't speak to bulletproof, but my stainless steel release slipped at full draw (60#), hit my Trinity and flew 10-15 yards behind me. It put a divots in the two moving parts on the far right of the rest, but it still adjusts flawlessly. I suspect that if it hit the support arm it would have bent it.
I have a Hamskea trinity and each time i shoot it starts making a clicking noise when I draw. I am constantly tightening the cord that’s attached the limb and it helps for a few shots then starts clicking again. Any pointers ?
would you be willing To do a in depth review comparison between different limb driven rests like the trophy tracker, vapor trail gen 7x, and the trinity hunter pro? or why you should choose a limb driven over cable or over none mechanical rest(whisker biscuit is the only one I can think of)?
What was the little do dad that replaces the rubber pad on your limb called?
Got the trinity not even knowing about them,because my smack down pro didn't fit on my v3 31.lucky me
The part that's connected to the spring does that have a screw that holds it down or does is just freely slide on and off? I'm wondering cause that came undone when I was shooting my bow the other day and was not sure if there was a screw holds it in or not.
Does the Hamskee work with the new V3X 33 with the new quick release quiver??
I need to take a drive east and have you help put that rest on my bow hahah.
Late Washington elk and deer season my rest failed to stay back a few times because it so so cold I believe.
It wasn't your rest it doesn't work good in cold wet environment it won't pick up all the way. Everybody loves gadgets but it cost me a bull elk hit low. Went back to camp shot for 30yrds hot the dirt. Wasn't the tensioner cord either.
Can this be used on a Mathews Ovation reference limb driven aspect? Great video, thanks.
This is better than a QAD Ultra?
love the videos, I haven't tried one of these yet, I have used the vaportrail 7 and 7x and like them. These seem super heavy??
Thanks good information.
Torn between the gen7x vapor trail and hamskea.... the springs on hamskea vs no springs vaportrail straight to rest. Whats your thoughts
Josh is fired up 😂
Trinity is too bulky for me prefer the hybrid hunter pro. Still very durable and more compact.
Waiting on a V3 to show up to install a Trinity onto it...what position do you recommend when mounting to the bow, as far forward and back? Forward flush against the riser? Thanks.
Forward flush
I think gear is best when it fits you best and gives you confidence
On the hamskea and it's being easily adjusted as in @7:50 do you think that's just from wear and tear that moves that cord adjustment, or getting bumped and scraped? Or is it by nature of the design of the metal clip and rubber o ring that from time to time thats just what you have to do?
Just remove the crappy stock string and use some good loop material like braided Spectra.
NEED HELP!! I am using bear species bow. I have a shoot draw 25”. I have the biggest peep sight I could buy. Running trophy ridge h4 react sight. I cannot see the yellow markers or level thru peep. I can only see sight pins. I am ok on accuracy but after missing a giant buck this I tested it hard and noticed I am very inaccurate. I feel it is because I am not centering my pins correctly. But it is hard to do when I can’t see the outer ring.
Switched last year.. all my bows have then now
Does it give your arrow a full containment option?
Versa full containment, or trinity hunter pro?
Have used a Hunter Hybrid for years and have never had an issue, awesome rests!
Do you guys use the felt on the blade or just run it bare plastic?
That plastic is there so you dont need felt it's amazing but you can use felt if you want but it's not needed
Check out the xv arrow rest
Is that attachment piece for the limbs only for Mathew’s style limbs and bows? I currently have the limbsaver rubber piece and knot attachment going on, on my Rx-1
I believe they make them for all bows also but the one you screw into the limb is only for Mathews I believe but on there website they have different options like where it's 2 plates that sandwich onto the limb to clamp it for sale
@@mustang268 thanks, do you think this contributed to a lot of wear on the d loop material? Thats why ive always went away from the clamps that come with some limb driven rests
@@Orr_s no I've had no problems
I shoot the trinity target pro with my TRX 38 g2, and it is the best rest on the planet.
Hybrid hunter pro is doing fine for me. My vxr seems to like it 😂
So after watching this unfortunately my pro shop sold me the hunter version. ? I have 6 inch brace expedition and use elk shape vanes. The vanes rest on rest in sitting position. Is that just the case with a 6 inch brace height? I have rest moved up as far as I can.
ihave the same "problem" but after slowly letting the bow down i saw that the fletching wont contact the launcher arm when firing due to the launcher arm being fully depressed 90% through the shot.
can some one tell me the name and artist of the song in the intro "...if there's a will there's a way...."
Trinity hunter pro is where it’s at!
So QAD Or trinity?
They are great
I’ve still got a TRIAX and want to upgrade from the QAD to the Trinity any fitment issues I should be looking for
No
@@mustang268
Thanks
Only thing i don’t like about my hamskea rest is that its a tight fit on my ventum 30 from being bulky, its a trade off for being tough. Shoot whatever you like and familiar with
Name of the song in your intro?
I’ve been eyeing a target version with the flat blade. Problem is, they cost too much for me. I’m gonna have to go with a manual adjust launcher for about $50. Another one I was looking at for my target bow was a Trophy Taker that had click adjust
For windage and elevation where each click was equal to .001”. It was cheaper than the Hamskea, but I still cannot afford it. Everything is through the roof on prices. This year will be tough for all archery shops and golf ships and everyone else. They want a fortune for something that does not shoot any more X’s than bows and equipment from 30 years ago. You guys are hunters and can’t have your equipment fail, but where to regular guys get their money for these super expensive gadgets?
intro song? please!
What about the epsilon
Love it bout damn its heavy, they need a carbon version.
Stop!
Trophy Taker are crap my Lock up blew up on me less then 50 shots and actually when drawing the bow the launcher arm goes in reverse now, their quality has gone to hell the past couple years. How’s the Hamskea for spot and stalk? 90% of my hunting is spot and stalk for hogs in the swamps here in coastal SC. I’m looking at the Trinity and the Vaportrail Gen7X for my Xpedition MX16.
Did you end up going with the trinity? I’m thinking on getting it as well with spot and stalk being incorporated in my hunting as well.
@@miguelcooper10 I ended up going back to QAD as my hand to grip On my Darton causes the bottom of limb driven rests to rub horribly on my hand. I have a few friends that do use the Trinity and LOVE LOVE it!
@@BowHunter74 I got the trinity a few weeks ago and it’s pretty nice👍🏽. My groupings are so much better with the trinity than with the whisker biscuit.
@@miguelcooper10 That’s awesome!!! Glad you are enjoying it!!