Building a Heatmap with the Outdoor WiFi Access Point WAX610Y

Follow this step-by-step tutorial of Building a Heatmap with the Outdoor WiFi Access Point WAX610Y
*Introduction*
The video begins with an introduction to Netgear's support for all industry-recognized Wi-Fi analyzer tools. The specific tool used in this example is EKAHAU AI Pro.
*Loading the Project Image*
The scene transitions to a system engineer loading an image of the project.
The customer has highlighted the outdoor garden area of a cafeteria in yellow, indicating the zone to be covered with Wi-Fi.
*Using the Scale Tool*
The engineer uses the scale tool to measure the distance in pixels, translating the customer's provided measurement into pixels.
The measurement from the last wall to the perimeter border is 125 feet, which equates to approximately 420 pixels in the picture.
The scale tool is used to establish a pixel-to-feet ratio since the area lacks physical walls.
*Determining Signal Attenuation*
Next, the engineer uses the attenuation area tool to assess signal loss when it encounters the main building.
A warehouse rack model, providing 18 dB of attenuation per meter, is selected.
The building's height is set at around 28 feet based on customer information.
The engineer outlines the entire building area on the image.
*Setting Up the Requirement Area*
The requirement area tool is used to define the total area that the wireless access points should cover.
The coverage is slightly extended beyond the designated limits to prevent under-specifying the wireless access points.
*Selecting the Wireless Access Point*
With all relevant data from Netgear, the engineer selects the WAX610Y outdoor wireless access point from a drop-down menu.
The selected access point is placed on the image, revealing the heat map of the wireless signal coverage.
The engineer adjusts the antenna power to 25mW and sets the height to the standard 15 feet.
*Adjusting Signal Direction*
The directional nature of the WAX610Y access point allows it to be aimed at specific areas.
The engineer angles the access point at nearly 45 degrees to maximize coverage of the central part of the area.
The green areas on the map indicate very good signal strength, while yellow areas are good and orange areas should be avoided.
*Planning for Additional Access Points*
To ensure complete coverage, a second outdoor wireless access point is planned for the other half of the area.
Both access points are configured with the same antenna strength of 25mW.
The final map shows the entire area covered in green, indicating robust signal strength throughout.
*Generating the Report*
The video concludes with the generation of a detailed report for the customer, showing optimal positions and configurations for the wireless access points.
*Closing*
The final message highlights Netgear's commitment to saving time and providing expertise to IT businesses.
Viewers are encouraged to request a remote site survey by emailing [e-mail] to start their projects with Netgear immediately.