I actually said "oh my God" out loud towards the end when you had the cabinet all covered! It is so freakin cool!!! This is on my bucket list. I just got a really cool Philco radio cabinet from the 30's that I want to put an amp like this inside. This is exactly what I want. An extremely excellent job. Fantastic that it's made from mostly salvaged parts...my goal too! Sounds incredible too! Just the way I like!👍😎🎸🎶
this homemade amp sounds AMAZING!!!!!! for what it's worth, you have all my respect... you're like king mida... you took stone which became gold... congrats... wish i had same knowledge..
That guitar tone is straight-up mesmerizing mesmerized. Been searching for tone like that for a long time, experimenting with all kind of weird s*** my favorite of all being Timex alarm clock as a preamp combined with I Curtis Mathes 350 watt tube amp home stereo receiver that's older than I am. But that tone...👍🤘
I tried this once only instead of a tube amp it was a hairdryer and instead of rocking out with an electric guitar I held the hairdryer like it was a microphone. I was having an awesome stage pressense and rocking really hard doing spin kicks. When I looked up like half the kids in the neighborhood were in my living room laughing at me.
Thanks. But I'm more of a beginner. It's my first attempt at a DIY amplifier. Based on the diagram by AX84. With modifications scheme for using old transformers and all other technical questions uncle helped me (and the questions were a lot). Then I just had to make the chassis, small pcb, hold and mount components, all connect the dots according to schema, screwed wooden crate and pull her leatherette. And that amplifier plays I was pleasantly surprised ....
Thank you. Yes recording is only through the microphone. My amp is based on the well-known scheme AX84 P1 with minor modifications for transformers and capacitors that I had from an old radio.
The tone sounds great. I have all the equipment and I'm electrically and mechanically inclined, but I can't seem to get a project going. Well, my last 4 guitars got stolen so even when I build an amp, I've got no guitar anyway. :(
You had a good idea. I like EL84 sound. Nice job with the cabinet !!!Can have a link to schematic you used ? at 2:56 it seems that the BF shielded cable (signal from input jack to the grid of pre-amp tube) has both end of the shield soldered to ground !!! Why?People doesn't do that at all !! That creates ground loops, hum.
amp sounds awesome...cant wait till I can make music similar to that come out of my guitar even lol. single notes in chords aren't exactly my strong point nor are bar chords for that matter.
In the first and third parts I played Squier Strat (neck, middle - some squier ceramic single; bridge - SD STK-S1b). The second part I played on Cort M520 with humbuckers (RM classic neck , RM bridge).
Zdarec, hraje ti to teda jedna báseň jen co je pravda... Krásně zabarvenej zvuk, s pěknym zkreslením... Jen mám dotaz k tý bedně... Jakým lepidlem jsi tam nalepil tu koženku a kde jsi sehnal ty krytky rohů? Předem díky za odpověď...
That sounds lovely and creamy :0) Don't spose you live near Suffolk? If so, I've got a lovely old "His Masters Voice" valve radio cabinet with original speaker that's just begging to be a small valve amp. I'd love to commission someone to make me one. I'd have a go myself but I think you need to know what you're doing when it comes to valves ! Cheers Gary
.............I BOUGHT A COUPLE OF TUBE RADIOS AND AM TRYING TO MAKE A AMP FOR GUITAR..............THE WIREING DOSNT LOOK COMPLECATED............DO U HAVE A DIAGRAM FOR THAT.......?
AhojSíťový trafo sem použil z gramorádia Tesla dunaj ( zkus aukro, sběrnej dvůr ... hledej jakýkoliv starý radio co má na konci el84 ) Jako výstupák sem dal trafo vertikálního vychylování: 9WN67610 je to taky v každý starý lampový televizi.Sice to neni správně impendančně vhodný, ale hraje to hezky.Já sem na tu tv náhodou natrefil v nějaký vesnici kde měli u krámu připravenej svoz starýho železa a elektroniky byla to asi Tesla azurit nebo něco podobnýho.Nebo použij výstupní transformátor RADIOX Minor VT40 ten se dá koupit za pár stovek a má i odbočky 4, 8, 16 Ohm.Zkus ty názvy tv a radia a toho Vt40 pohledat na google a uvidíš.
Tak jsem díky vaší radě zatím seznal síťové trafo z radia Dunaj. Akorát mě zaráží, že jeho výstupní napění na sekundáru je asi 210V/0.6A, což je na EL84 málo ne? Podle informací by na EL84 mělo být 250V na anodě. Děkuji za odpověď
Je to stejný schema jako Ax84 P1 (najdeš na google ) akorát trochu přispůsobený pro ty starý teslácký trafa, takže si stejnak budeš i ty muset upravit to základní schema na konkretní trafa..
jj super díky.. :) ja sem na to pak koukal už no.. :) máš to pěkný. Já sem nedavno rozjel stary radio 532A echo.. ty trafa sou stejny... aspon co vidim.. :) a hraju přes něj taky paráda.. lepší než moje stávající kombo - fender - Mustang 1
Yes .... There's another video I had also recorded on compact canon ... just for an idea because the video sound from compact is horrible ... much treble and distorts .. th-cam.com/video/x5Kfl8XxMMM/w-d-xo.html Sonic lies on top of blackheart head out of the picture and plays through its speakers
it's two triodes, cathode biased above ground, with V1 going to V2, and then a pentode as the output stage. No push-pull on the output. This is NOT the amplifier above, but a diagram of something similar is here: www.guitarkitbuilder.com/img/mod102/mod_102_schematic.pdf
I actually never got chills from listening to background of some DIY video. Until now. Man, I love that sound, so good.
It'll be that Karaoke mic........
I actually enjoyed listing to the guitar playing....I couldn't stop listening until it was done...nice!
I actually said "oh my God" out loud towards the end when you had the cabinet all covered! It is so freakin cool!!! This is on my bucket list. I just got a really cool Philco radio cabinet from the 30's that I want to put an amp like this inside. This is exactly what I want. An extremely excellent job. Fantastic that it's made from mostly salvaged parts...my goal too! Sounds incredible too! Just the way I like!👍😎🎸🎶
this homemade amp sounds AMAZING!!!!!! for what it's worth, you have all my respect... you're like king mida... you took stone which became gold... congrats... wish i had same knowledge..
That guitar tone is straight-up mesmerizing mesmerized. Been searching for tone like that for a long time, experimenting with all kind of weird s*** my favorite of all being Timex alarm clock as a preamp combined with I Curtis Mathes 350 watt tube amp home stereo receiver that's older than I am. But that tone...👍🤘
lovely sound and sweet playing
Great job. Nice chilled playing too, cheers.
That turned out excellent. very nice
I tried this once only instead of a tube amp it was a hairdryer and instead of rocking out with an electric guitar I held the hairdryer like it was a microphone. I was having an awesome stage pressense and rocking really hard doing spin kicks. When I looked up like half the kids in the neighborhood were in my living room laughing at me.
Pretty slick and good sound... Would have been nice to see a schematic.
Thanks
schema find here
www.ax84.com/static/p1/AX84_P1_101004.pdf
3211ymit Much appreciation!!! thanks...
hella good job man! sounds like it should
Good look and very good sound! I love it!
Just perfect, it makes me envious to do the same
hey man nice build, nice sound and nice playing.
Thanks. But I'm more of a beginner. It's my first attempt at a DIY amplifier. Based on the diagram by AX84. With modifications scheme for using old transformers and all other technical questions uncle helped me (and the questions were a lot). Then I just had to make the chassis, small pcb, hold and mount components, all connect the dots according to schema, screwed wooden crate and pull her leatherette. And that amplifier plays I was pleasantly surprised ....
old love leave me alone....nice playing
Californication sound s GREAT on this amp!
good sound - excellent guitar work!
Thank you. Yes recording is only through the microphone. My amp is based on the well-known scheme AX84 P1
with minor modifications for transformers and capacitors that I had from an old radio.
Good job, greating from Colombia.
I like your Sonic Video Canon video, it is a good tone.
Buetiful tone
The tone sounds great. I have all the equipment and I'm electrically and mechanically inclined, but I can't seem to get a project going. Well, my last 4 guitars got stolen so even when I build an amp, I've got no guitar anyway.
:(
good sound, powerful
really like the first bit, reminds me a little of gotten by slash mainly the bluesy fills in the song but yeh i like it :)
great job.
beautiful
woaw so cool ..i want make one like this.
sounds great
great job,sounds sweet
I can't read the schematics. Are they posted anywhere?
www.ax84.com/static/p1/AX84_P1_101004.pdf
Very nicely done, what did you paint the transformers with? There's a lot of bottom end for a EL84.....sounds sweet.
nice work!!!
nice job
Sound is like "The Stooges" 1st LP, sizzling and screamy...a wah-wah and you could go for it! Would be great to hear one with a "Valve" recti-fier?
impressive
You had a good idea. I like EL84 sound. Nice job with the cabinet !!!Can have a link to schematic you used ? at 2:56 it seems that the BF shielded cable (signal from input jack to the grid of pre-amp tube) has both end of the shield soldered to ground !!! Why?People doesn't do that at all !! That creates ground loops, hum.
+bailamosmundolatino basic schema find here
www.ax84.com/static/p1/AX84_P1_101004.pdf
Have you tried the amp using TDA2005M? It's given in the "Circuits" section of the site electronicsforu.
sounds fine!
great sound ! which guitar and pickups you were using please ?
This sounds so good.
Around 1:20 you have a REALLY sweet sound, is that the amp alone that can make those noises? No pedals?
@@3211ymit What guitar? I can't get anywhere near your tone
@@rasped Squierstrat china 1994 and cort m520
th-cam.com/video/x5Kfl8XxMMM/w-d-xo.html
Thank you. The first and the second record is improvisation, the third attempt at red hot chilli peppers.
amp sounds awesome...cant wait till I can make music similar to that come out of my guitar even lol. single notes in chords aren't exactly my strong point nor are bar chords for that matter.
In the first and third parts I played Squier Strat (neck, middle - some squier ceramic single; bridge - SD STK-S1b).
The second part I played on Cort M520 with humbuckers (RM classic neck , RM bridge).
Pěkné
Zdarec, hraje ti to teda jedna báseň jen co je pravda... Krásně zabarvenej zvuk, s pěknym zkreslením... Jen mám dotaz k tý bedně... Jakým lepidlem jsi tam nalepil tu koženku a kde jsi sehnal ty krytky rohů? Předem díky za odpověď...
+Jan Hartman Lepil jsem to chemoprenem v plechovce a rohy seženeš na prodance.
That sounds lovely and creamy :0)
Don't spose you live near Suffolk? If so, I've got a lovely old "His Masters Voice" valve radio cabinet with original speaker that's just begging to be a small valve amp. I'd love to commission someone to make me one. I'd have a go myself but I think you need to know what you're doing when it comes to valves !
Cheers
Gary
Where do you get the metal boxes? Because I can't find a machinist anywhere in the area.
Woooooooooowwwwww
AWESOME!
Songs?
Thanks!
Tonelicious
woaw cool
.............I BOUGHT A COUPLE OF TUBE RADIOS AND AM TRYING TO MAKE A AMP FOR GUITAR..............THE WIREING DOSNT LOOK COMPLECATED............DO U HAVE A DIAGRAM FOR THAT.......?
You can do that easily. I've done it myself. Just watch the heater pin! It's got a lot of juice on it!
Waht's the second song?
how much would it cost for the parts to make this amp?
Zdravím, potřeboval bych radu ohledně toho kde sehnat ty trafa nebo kde mám hledat? Jinak zvouček je jako pohlazení. to musím uznat.
AhojSíťový trafo sem použil z gramorádia Tesla dunaj ( zkus aukro, sběrnej dvůr ... hledej jakýkoliv starý radio co má na konci el84 ) Jako výstupák sem dal trafo vertikálního vychylování: 9WN67610 je to taky v každý starý lampový televizi.Sice to neni správně impendančně vhodný, ale hraje to hezky.Já sem na tu tv náhodou natrefil v nějaký vesnici kde měli u krámu připravenej svoz starýho železa a elektroniky byla to asi Tesla azurit nebo něco podobnýho.Nebo použij výstupní transformátor RADIOX Minor VT40 ten se dá koupit za pár stovek a má i odbočky 4, 8, 16 Ohm.Zkus ty názvy tv a radia a toho Vt40 pohledat na google a uvidíš.
Tak jsem díky vaší radě zatím seznal síťové trafo z radia Dunaj. Akorát mě zaráží, že jeho výstupní napění na sekundáru je asi 210V/0.6A, což je na EL84 málo ne? Podle informací by na EL84 mělo být 250V na anodě. Děkuji za odpověď
is it catode biased or fix biased ? i notice the trimmer on the pcb board
no, the trimmer is between the 6,3v heater outlets .. as a humming eliminator
hi..what is the value for variable switch you used for the middle?
+Adam firdaus Ismail ( BASS = 500 K , MIDDLE = 50 K /N , TREBLE = 250 K)
how it cost
Can i have the schematic?
Can you giving me too the schematic please ?
Je to stejný schema jako Ax84 P1 (najdeš na google ) akorát trochu přispůsobený pro ty starý teslácký trafa, takže si stejnak budeš i ty muset upravit to základní schema na konkretní trafa..
jj super díky.. :) ja sem na to pak koukal už no.. :) máš to pěkný. Já sem nedavno rozjel stary radio 532A echo.. ty trafa sou stejny... aspon co vidim.. :) a hraju přes něj taky paráda.. lepší než moje stávající kombo - fender - Mustang 1
this is the real amp's sound?
Yes .... There's another video I had also recorded on compact canon ... just for an idea because the video sound from compact is horrible ... much treble and distorts .. th-cam.com/video/x5Kfl8XxMMM/w-d-xo.html
Sonic lies on top of blackheart head out of the picture and plays through its speakers
lovevly :3
...asi Olda Vojna...? Nazdar.
A jéje další českej bastlíř.
not feeling the distortion. too fizzy
Luckily for all of us...No one cares about your silly feelings...
give us the schematic bro :3
it's two triodes, cathode biased above ground, with V1 going to V2, and then a pentode as the output stage. No push-pull on the output. This is NOT the amplifier above, but a diagram of something similar is here: www.guitarkitbuilder.com/img/mod102/mod_102_schematic.pdf
Materiál tesla ok