Hai good morning sir...I watched MSA full video.. thanks sir also I have doubt 1. Stability means u said .." external time period" measurements For example today I check one part same part should be check next day(tomorrow) and next week or else different part( new part) 2.pls give one video how to make and calculation with example of bias and linearity
@@QualityExcellenceHub International material data system - IMDS... Its mandatory for most of the automobile vendors to update their material component details.
@@QualityExcellenceHub Take your time sir... Happy to get fast reply from you... This shows how egar you are to learn & teach.. All the best for your teaching service 🙏🙏🙏 Happy learning ahead..
Sir many thanks for the video. Your clear explanations help me a lot. However,I have small doubt to ask. @5.11 says Measurement system should be in statistical control. May I ask how to get a measurement system in statistical control? I believe it should be the PROCESS that needs to be in statistical control instead of Measurement System? Please correct me if I am wrong?Thanks again.....
Thanks for your appreciation. Your Query: It means no presence of special cause in the Measurement System. That is the fundamental requirement of Good Measurement System. Happy Learning Ahead.
Appreciate your video clip. Well done summary. I have a request, could you please post an example of GR&R using Excel if possible showing how the terminology and technical terms are implemented to make it clearer for students to understand the MSA process. Thank you very much!
@@QualityExcellenceHub And one more query for Statistical process control (spc) is any standard available...☺ if availble please mention standard number...
Sir plz explain how to select samples for msa study. If Dimn is 10.0 +/- 0.02 can i take sample outside from this limit like 10.03 or 9.97 for study. Because to know measurement system capable to detect rejected parts.
Sir We have following Grr conducted with good part tolerance variation of min to max. But my selection of parts are not allowed that particular dimensions ng part May I allowed in this selection rejected parts?
For Actual MSA, OOT parts on higher side, lower side, boundary cases and near to nominal cases to be selected, else MSA will not reflect the right picture. Hope this helps. Happy Learning.
Sir from my understanding ur doing msa study for qualifying the instrument. So it is mandatory to chose out of tolerance parts, within tolerance parts of min and Max tolerance. So that u will understand better about the results.
Omg!! Did you say that??? Leasecounf of vernier is 0.01 and micrometer L.C is 0.001???? I have studied that for ver it is .02 and for mic it is .01???😕😕
Yes. You are right. Thanks for your clarification. What you have mentioned is for manual VC and MM. I referred to is Digital VC and MM. World is improving my friend. Happy Learning.
No certification charges. It's free knowledge sharing through videos here on TH-cam. Please let me know if you want me to post video on specific topic. Happy Learning ahead.
Superb sir till now i am not getting this much clear explanation for MSA... you are great sir...
Thanks. Happy Learning ahead.
As usual your videos are so informative and are of high QUALITY. Thank you so much for sharing your knowledge
You are welcome. Happy Learning.
Nice
Thanks. Happy Learning Ahead.....
perfect video !!!
Thank you. Happy Learning Ahead....
Super sir
Thanks. Happy Learning ahead....
Very nice presentation & explanation.
Thanks. Happy Learning ahead.....
Excellent way of explaining. Thank you so much for your valuable guidance ☺️
You are welcome. Happy Learning ahead....
Most learning vedio sir
If any more vedio on MSA please kindly share
Thanks. Please let me know what you want to know more.
Great sir. Simple English understandable too. Better if you explain measurement system by taking any of the part dimension.
Thanks for your input. Happy Learning ahead....
Thank you Sir , You're explantation is awesome
You are welcome. Happy Learning.
Nice video. This was a very clear overview of MSA. I will be checking out more videos on your channel.
Thanks. Happy Learning ahead.
Great video thank you so much..
You are welcome. Happy Learning ahead.....
great explanation ,to the point and clear
Thanks. Happy Learning ahead.
Hai good morning sir...I watched MSA full video.. thanks sir also I have doubt
1. Stability means u said .." external time period" measurements
For example today I check one part same part should be check next day(tomorrow) and next week or else different part( new part)
2.pls give one video how to make and calculation with example of bias and linearity
1. Yes. One reference part over a period of time.
2. Sure, I will post a video on it. Please give me some time.
Happy Learning.
Thanks sir
Very good explanation Sir. Thank you
You are welcome. Happy Learning.
Nice video 👍
Thanks. Happy Learning ahead....
Well done..clear explanation
Thank you very Much.
Thank you for teaching me sir...
You are welcome. Happy Learning ahead.
Great sir,
Thanks. Happy Learning ahead.
Thank you so mach sir, very exlant session
Pls share more ex.of linearity video
Thank you. Happy Learning ahead....
Sure, I will. Please give me some time. Happy Learning ahead....
Thanks Sir for the vedio.....👌👍
You are welcome. Happy Learning.
Thank you Sir!!
You are welcome. Happy Learning ahead....
Nice video
Thanks. Happy Learning.
Awesome explanation, Please add a link to download this presentation
Thank you for your appreciation. You can take screenshots and utilize it. Happy Learning ahead...
Really nice video.
Could you make hindi version?
Sure. Please give me some time.
excellent sir, please do video for JIT ( just in time) prinicpal of jit
Thank you. Sure, I will. Please give me some time. Happy Learning ahead...
Super explanation with neat and simple video. Sir, could you explain about IMDS and its latest updation.
Thanks. Please elaborate IMDS. Happy Learning ahead....
@@QualityExcellenceHub International material data system - IMDS... Its mandatory for most of the automobile vendors to update their material component details.
Ok. Will try to upload. Please give me some time. Happy Learning ahead....
@@QualityExcellenceHub Take your time sir... Happy to get fast reply from you... This shows how egar you are to learn & teach.. All the best for your teaching service 🙏🙏🙏 Happy learning ahead..
Sir many thanks for the video. Your clear explanations help me a lot.
However,I have small doubt to ask. @5.11 says Measurement system should be in statistical control. May I ask how to get a measurement system in statistical control?
I believe it should be the PROCESS that needs to be in statistical control instead of Measurement System?
Please correct me if I am wrong?Thanks again.....
Thanks for your appreciation.
Your Query: It means no presence of special cause in the Measurement System. That is the fundamental requirement of Good Measurement System.
Happy Learning Ahead.
Appreciate your video clip. Well done summary. I have a request, could you please post an example of GR&R using Excel if possible showing how the terminology and technical terms are implemented to make it clearer for students to understand the MSA process. Thank you very much!
Sure, I will. Please give me some time. Happy Learning ahead.
Are reference value and true value same? In my understanding both are different. Please clarify
Thank you very much sir for sharing your knowledge .
Can you send me any link there I can read in brief MSA.
I mean can you suggest me any line any book there I can get more examples on MSA.
Thank you very much for the detailed explanation. Could you please tell how to differentiate between the variable and attributive data? :)
Sure, please check my video on SPC for that detail..... Happy Learning ahead.....
Hello, do you provide coaching one on one? Where are you located? I am in CA, Los Angeles. Thank you
You are welcome. I am from India and not into coaching yet. Thank you for your offer. Happy Learning ahead.
Sir can you tell me.
Why R&R acceptance given 10%.
What law is behind this. R&R follow the ANOVA method
As it is universally decided guideline mentioned in AIAG manual of MSA.
Are you a quality professional.i am a qc engineer and I want to become a quality professional for that I want guidance.can you help me
Yes, I am a Quality Professional.
@@QualityExcellenceHub may I get your WhatsApp no
Sir ,As you stated they are so many acceptance criteria are in google for Gauge R&R is there any standard available ?
Thanks in advance.
Yes. Latest MSA Manual.
@@QualityExcellenceHub
And one more query for Statistical process control (spc) is any standard available...☺ if availble please mention standard number...
Sir plz explain how to select samples for msa study. If Dimn is 10.0 +/- 0.02 can i take sample outside from this limit like 10.03 or 9.97 for study.
Because to know measurement system capable to detect rejected parts.
Yes, you have to. Happy Learning ahead...
Superb explanation
Thanks. Happy Learning ahead....
what do you mean by appraiser here?
Inspector or the person who is performing measurement. Happy Learning ahead....
Sir
We have following Grr conducted with good part tolerance variation of min to max. But my selection of parts are not allowed that particular dimensions ng part
May I allowed in this selection rejected parts?
For Actual MSA, OOT parts on higher side, lower side, boundary cases and near to nominal cases to be selected, else MSA will not reflect the right picture. Hope this helps. Happy Learning.
Sir from my understanding ur doing msa study for qualifying the instrument. So it is mandatory to chose out of tolerance parts, within tolerance parts of min and Max tolerance. So that u will understand better about the results.
Please add videos on ISO 9001:2015 and IATF 16949:2016.
Sure, I will add. Please give me some time.
Sir aapki offline classes bhi h kya..
I give free knowledge here through TH-cam Videos. Happy Learning.
Sir,
How much repeatabilidty is allowed...?
Already mentioned in the video. There is acceptance criteria of R&R. And not for Repeatibility alone.
Sir,
Any formula for Gauge R&R
Hello Ranjan Singh
Can you explain the meaning of "APPRAISER"
Thanks in advance.
Appraiser is anybody who is performing the inspection
Thanks @@afsirahmad5994
Omg!! Did you say that??? Leasecounf of vernier is 0.01 and micrometer L.C is 0.001????
I have studied that for ver it is .02 and for mic it is .01???😕😕
Yes. You are right. Thanks for your clarification. What you have mentioned is for manual VC and MM. I referred to is Digital VC and MM. World is improving my friend. Happy Learning.
Certificate ke liye .. kya fees h uski plz tell me
No certification charges. It's free knowledge sharing through videos here on TH-cam. Please let me know if you want me to post video on specific topic. Happy Learning ahead.
Hi sir, can you please provide this presentation data?
Gauge the correct word not gage sir
Both are correct.....
Happy Learning ahead.
WOI GIMANA BENERIN NYA INI MSA TERUS BERHENTI MULU
*redmi note 8
Nice
Thanks