what are your thoughts on the $200 anubull 100cc engine kit on amazon? maybe you should do a video on that next. I was thinking of buying one for my Schwinn occ chopper.
I got one and the motor was cruddy filthy inside and out... Im glad I took the top of the cylinder and looked inside. There was ALL KINDS OF METAL SHAVINGS. THE gas tank even had metal debris in it. My casting was good... no mold bleed so exhauste and carb ports didnt need routed. TAKE THE MOTOR APART AND CHECK EVERYTHING OVER TO MAKE SURE THAT THERE ARE NO PARTICULATE MATTER LEFT IN THE MOTOR. IT LOOKED TO ME LIKE THEY HAD TAPPED THE SPARK PLUG HOLE AND JUST LET ALL OF THE FILING FALL DOWN INSIDE OF THE CYLINDER. Bolts and nuts were garbage and half of them stripped taking them off to change the back sprocket onto a different rim. The paint job on my tank was okay. The muffler flange was not flat. But that's okay I've got one of the flexible exhaust units instead. I paid $130 and got the four year Amazon warranty for 40 bucks which I would suggest everyone do after seeing the crap in the motor and the condition that they sent it in. I still haven't gotten it fired up yet as I need to get tires and tubes but I will keep you posted as far as how the build goes. anyone considering buying a bike kit needs to totally investigate every aspect of it as far as it fitting your bike frame to what type of exhaust to use and carb and CDI and all the rest of it.
I have a 72 Raleigh Sport with the three speed.its super light and like new.seems to me a motor would be to heave on it.I'm useing gas bike. Frames with built in tanks.and have a phatmoto too.good luck on your build but id think hard on the Raleigh taking a motor they are nice.also have a1945 colorflow very nice.
when you unbox what size mounting studs what cylinder any slag , in general more info. Pull the head off inspect. Need to know what is inside . The rest of the junk we all know.
@@JoshHarrisRides I got the black wire coming from the engine to the ignition coil and then the black going up to the kill switch and the blue wire from the engine to the blue on the coil
I would like to know? What would you do if you seen a guy that stole your bike? 1, beat him up. 2 forgive him let it go he needed more than you? (3, kill him ??? Please I need advice
Wished you would have opened up the engine. Do anbull engines come ported? long crank or short crank? 10mm wrist pin or 12? Windowed piston? Every novice builder will want to know this stuff. For that reason I have give you a thumbs down.
I really appreciate the shout out!! Keep it up dude, I can't believe you're already getting free motors in the mail!!!!!
I can’t believe it either.
That clamshell will be fine. I’ve never spent much for mine and they were always better than stock.
Josh hello, great videos thanks to keep sharing your motorized bikes built & upgrades,, from panama, joe keep up that great job. Thanks.
Great video bro let me know how you like that motor I was thinking of getting the same one 😀
Will do. Look for another video next Friday
Love youre videos man 😀👍 You deserve alot more recognition
Thank you. Share if you can. Thanks
Same
Can you show us how to mix the gas
what are your thoughts on the $200 anubull 100cc engine kit on amazon? maybe you should do a video on that next.
I was thinking of buying one for my Schwinn occ chopper.
Love you Channel I've got a 1911 Harley-Davidson bicycle looking to upgrade motor exhaust carburetor
Alright good video. Not to many motorized bike guys on you tube keep up the good work.
I got one and the motor was cruddy filthy inside and out... Im glad I took the top of the cylinder and looked inside. There was ALL KINDS OF METAL SHAVINGS.
THE gas tank even had metal debris in it.
My casting was good... no mold bleed so exhauste and carb ports didnt need routed.
TAKE THE MOTOR APART AND CHECK EVERYTHING OVER TO MAKE SURE THAT THERE ARE NO PARTICULATE MATTER LEFT IN THE MOTOR. IT LOOKED TO ME LIKE THEY HAD TAPPED THE SPARK PLUG HOLE AND JUST LET ALL OF THE FILING FALL DOWN INSIDE OF THE CYLINDER.
Bolts and nuts were garbage and half of them stripped taking them off to change the back sprocket onto a different rim.
The paint job on my tank was okay. The muffler flange was not flat. But that's okay I've got one of the flexible exhaust units instead.
I paid $130 and got the four year Amazon warranty for 40 bucks which I would suggest everyone do after seeing the crap in the motor and the condition that they sent it in.
I still haven't gotten it fired up yet as I need to get tires and tubes but I will keep you posted as far as how the build goes.
anyone considering buying a bike kit needs to totally investigate every aspect of it as far as it fitting your bike frame to what type of exhaust to use and carb and CDI and all the rest of it.
I have the same motor and it last me almost 2500 miles so far and going strong .. And plus the cnc rear hub it dose work ...
SWEET NESS !!!!
I have a 72 Raleigh Sport with the three speed.its super light and like new.seems to me a motor would be to heave on it.I'm useing gas bike. Frames with built in tanks.and have a phatmoto too.good luck on your build but id think hard on the Raleigh taking a motor they are nice.also have a1945 colorflow very nice.
Another great video, Thanks Josh
I really like your neighbor shirt I want it
How are you ?
Where are you from??
Does it have a governor
when you unbox what size mounting studs what cylinder any slag , in general more info. Pull the head off inspect. Need to know what is inside . The rest of the junk we all know.
I’ll see what I can do
I have 3 anbulls love them
Robert call 17736210805
I want a 80cc cycle cheat engine
9469916055
Please you call me bro
So it’s been six months what’s your take on the anbull motor you purchased the up the downs
You’re the best dude wtf.. I have 2 motorized bicycles
wow your channel blew up i was before before 30 subs
I can't complain. Thanks for being one of the OG subscribers
Scuff the hell out of your hub and the inside of the hub adapter,, might consider using some epoxy to bond it,, mine spun wiping out the spokes
Good information Thanks
6 or 8 mil mounts and the hardware Philips or Allen head?
Bro good channel
Where does the green wire from the kill switch go to and the white wire from the engine please
Green to black. White is extra. Check out my cdi video
@@JoshHarrisRides I got the black wire coming from the engine to the ignition coil and then the black going up to the kill switch and the blue wire from the engine to the blue on the coil
@@chrisflewers4307 check out the carb and cdi video. I think it will help you.
All sorted that just can’t kick it over that easy it feels stiff for some reason
great vid
Thanks. That was entertaining too. Subbed!
Thanks for the sub!
That's the way to go on the hub, I tried the rag joint thing and it's just too big of a pain in the a$#!
They aren’t making these any longer.
helped me allot
Is the speedo accurate in your intro??
Yes but it’s kph not mph
Iv got a red one
I make fart noises in all my exhaust pipes as well
I think it’s the right thing to do
I would like to know? What would you do if you seen a guy that stole your bike? 1, beat him up. 2 forgive him let it go he needed more than you? (3, kill him ??? Please I need advice
Oh ok I will bug now
No bro!
You....ramble so much! OMG!! 😳
You can get that exact same cheap engine on wish for like $70, lol
Wished you would have opened up the engine. Do anbull engines come ported? long crank or short crank? 10mm wrist pin or 12? Windowed piston? Every novice builder will want to know this stuff. For that reason I have give you a thumbs down.
are the banana exhausts good?