Get More Power For Your Road Glide With A Stage 2 Cam Upgrade!

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024
  • Road Glide Stage 2 Cam Install! S&S 475 C cam chest in my Harley Davidson! Finally I get to stage 2 on my ‪@harleydavidson‬ Road Glide names "The Grinch." We went with an ‪@SSCycleInc‬ 475C cam chest kit in this bike and had it professionally installed. On the Road Glide ST we will put a Zippers 472 cam in. The Grinch was professionally tuned by Billy at ‪@alligatoralleyharleydavids3556‬ and we ended up with 114 horsepower and just about 125 lbs ft of torque. Had I gone with a full length 2-1 we could have gotten more, but the sound of my ‪@TABPerformance‬ zombies is more important to me than a few horses.
    Parts List:
    1. S&S Cycle 475C Cam Chest Kit: www.sscycle.co...
    2. Tab Performance 2-2 Head Pipe: www.tabperform...
    3. Tab Performance 4" Bam Sticks: www.tabperform...
    Dynojet PowerVision: alnk.to/hDleuUo
    4. ‪@Advanblack‬ El Sueno Body Kit: www.advanblack...
    Pro Monkey Merch: www.professional-monkey.com
    #harleydavidson #roadglide #sscycle #Stage2 #biker #motorcycle #sturgis #daytona #motorcyclerally #promonkeynation #professionalmonkey #chopper #advanblack #performancebagger #streetglide

ความคิดเห็น • 194

  • @owdiss1978
    @owdiss1978 ปีที่แล้ว +11

    I just did same kit in my 2022 ultra limited 114 engine 475 cam, ss intake manifold , stock intake from stage 1 , stock decat head pipe khrome works slip ons with ripper baffles dyno tuned at 120hp & 132 torque even the tuner was impressed with the numbers!!

  • @Rex_S
    @Rex_S ปีที่แล้ว +8

    My 107 with the 475 made 109hp/118tq. Took me about 3.5hr to install myself on my lowrider. Sound and runs awesome

  • @parkeslife4323
    @parkeslife4323 ปีที่แล้ว +6

    Nice! Grinch is coming along. Can't wait to see what's next. Stage 2 can be louder because the cam changes when the valves open and close. And a higher lift cam allows more air/fuel to flow in to be squashed and burnt. So more exhaust gas comes out under more pressure at a different pulse timing. 👍

  • @ncautolink
    @ncautolink ปีที่แล้ว +2

    I just did mine 475 cam on 2019 Street Glide Special w 114 motor, FuelMoto head pipe and Rinehart 4.5 DBX exhaust w FuelMoto inserts and tune! I love it.

    • @scottp2868
      @scottp2868 ปีที่แล้ว

      I have the exact same set up, just finishing it all up. What numbers did you end up getting? My numbers are good but the seat of the pants feels way better.

  • @hank3859
    @hank3859 ปีที่แล้ว +4

    I had to replace my manifold because it warped, so I put the SE manifold in, I have true duals from Vance & Hine with Twin Slash slip-ons, S&S 475 also. My Road Glide is a 107 and my tune made 106HP and 117 TQ. And yes it got very loud after it was done.

  • @rpmfreak9150
    @rpmfreak9150 ปีที่แล้ว +2

    Absolutely love the sound. Those numbers aren't really anything, to complain about either! Great video brother thanks for sharing.

  • @wcraiderevo8078
    @wcraiderevo8078 ปีที่แล้ว +2

    Methinks he's done that install a time or three...

  • @jesusuribe1660
    @jesusuribe1660 ปีที่แล้ว +4

    Great video! Learned a lot man and it went towards my goals with what I visioned in doing to my 22 SGS. Answered some of my questions from your previous video. Thank you for the knowledge!

  • @HappyRamblingCamper
    @HappyRamblingCamper ปีที่แล้ว +1

    Love my 2016 UL with the H.O. 103 just hit 64,000 miles yesterday… bullet proof. Compensator at 58,000 miles.. stage 1. Since the H.O. Has a “hot cam” kinda .. i said kinda .. calm down …. Love it ….

  • @nigelleahy406
    @nigelleahy406 11 หลายเดือนก่อน +1

    Omg i never heard a harley sound so good. I allways taught small pipes and fishtails and everyone was telling me no no go for the bigger pipes but no u are right. Smaller pipes and them fishtails sound like THUNDER.......... U have great knowledge of the harleys. Thanks very much from Ireland.

  • @toolmaker5150
    @toolmaker5150 ปีที่แล้ว +1

    Thanks for the vid. While upgrading a cam plate and oil pump on a ‘20 and up, is not a waste on money, but is not needed.
    I always hear the argument “you’re already in there” If you have an extra $1600 and are paying for labor, maybe so.
    A top builder and tuner in my area (CA Bay Area) told me it would be a waste of money for my ‘21 FXLRS. I was only doing a bolt in cam. He recommended a 22xe over the 475. I also do my own work.

  • @williamvaughan6448
    @williamvaughan6448 ปีที่แล้ว +2

    I did the S&S cam chest as well on my '18 Road Glide Ultra, but went with the Zippers 468 cam. I also went wide band on the O2 sensors, SE Pro Tune Plus and Power Vision 2B. 107 HP and 118 torque with 4.5" Tabs. Yes, much louder after the cam!!! I love the lope with the 468 but the 475 may have just a teeny but more.

  • @scottrobbins3410
    @scottrobbins3410 ปีที่แล้ว +2

    Stock should be about 87 HP and 109 TQ. I put the S&S 475 into my 2019 ultra with Rinehart duals and it put out 114 HP and 128TQ. I just put the same cam in son-in-laws 2021 FLHXS with a TBR 2-1 shorty and it pulled 117 HP and 128 TQ.

  • @reginaldrobinson4810
    @reginaldrobinson4810 ปีที่แล้ว +1

    New to the channel and love the content have been binging a lot of the old videos and I appreciate the light, but informed of nature of them.

  • @rubencarrillo6638
    @rubencarrillo6638 ปีที่แล้ว +2

    Sweet man. Mine is 114 RGS with the THeader mufflers, jackpot header and STAR 30/30 cam. Numbers are 119.8 hp and 138tq. It’s fun to ride.

  • @davidellis7446
    @davidellis7446 หลายเดือนก่อน

    I got married on a 64 Panhead! Getting St2 on the streetglide next month! Hi from UK

  • @markdurham7046
    @markdurham7046 ปีที่แล้ว +1

    The sound is incredible, the lope is definitely Harley Davidson

  • @lastnline1
    @lastnline1 ปีที่แล้ว +2

    121 hp 122 torque on a 114 stage 4 screaming eagle kit , power vision tuner khrome werks 2-1 exhaust

  • @tommiller8714
    @tommiller8714 ปีที่แล้ว +1

    Grinch performance upgrades coming along nicely; S&S 475c Cam Chest Kit is awesome! Do one more thang to the "Grinch" to complement the Stage-1/Stage-2 upgrades: In short, get selected HD OE "plastic" parts off the bike.
    1. Replace the plastic OE intake manifold with a 55mm aluminum intake manifold (S&S and HD-SE offer these).
    2. The cover on top of the transmission...replace the OE plastic piece with a Trask M8 Checkvent (metal and it properly ventilates the crankcase, plus it looks good, available in chrome and gloss black).
    3. Cable Clutch adjuster...replace the plastic OE piece with a metal aftermarket piece (about $50, I believe I got mine from HogWork).
    Other: for air/oil cooled Touring...Add the Fan (HD or Thundermax) to the Oil Cooler and flash ECM (if stock tuner), or ensure box is checked if using Dynojet or TTS. If using a Thundermax ECM, super easy.
    Just saying!
    Tom M., 2023 RG-ST 117 Stage-1. S&S 2-1 Sidewinder (no cat; dB reducer installed for now until Tuned), S&S 55mm intake manifold; HD-SE Extreme Ventilator a/c; Trask M8 checkvent; HD oil cooler Fan; numerous other upgrades to Lighting, Audio, Bars, Suspension, etc. Planning on Stage-2, considering the Redshift 472 Cam and the Star Racing 485 Cam.

  • @devinkierski4102
    @devinkierski4102 ปีที่แล้ว +1

    2011 Harley cvo streetglide 110ci with powervision and s&s 585 ez start cam kit dyno was 109.43hp 118.76tq

  • @ricklustig6613
    @ricklustig6613 ปีที่แล้ว +1

    You did a great job of explaining the differences in a most entertaining way, lol. Kudos from the old biker in the far great white north :)

  • @ErikLandrethComedy
    @ErikLandrethComedy ปีที่แล้ว +1

    Every town needs a Billy , I have spoken

  • @TweedleD
    @TweedleD ปีที่แล้ว +5

    There's nothing tighter than a good cross thread 😅

  • @MinnowMoto
    @MinnowMoto ปีที่แล้ว +1

    Great video. I love watching those guys work. Amazing.

  • @ckthompson7928
    @ckthompson7928 ปีที่แล้ว +1

    Without going into a huge deal about cam operation...... Basically, the more displacement, the taller lift and longer duration, the biggest trick is getting your cam for the rpms you ride . I'm sure there's lots of people that are saying the same thing.... That 475 is a really good cam for the m8 good choppy exhaust note, and from 1600 rpm- to 5800 rpm you'll be smiling ear to ear..... The Grinch that stole torque+ horsepower.... Be a hell of a sequel... Enjoy that beast

  • @ericnay7733
    @ericnay7733 ปีที่แล้ว +1

    I’ve got a 2022 road glide standard 107 in reef blue with a Bassani 2 into 1 mid length and Arlen Ness big sucker. I originally wanted the s and s 475 because it chops so hard and sounds amazing on top of its performance. But it was during Covid and they were back ordered. And I had money burning a hole in my pocket bad. So I went with the zippers red shift 468 instead. Cant say that I’m disappointed. It doesn’t lope as nice but it still has a good sound. And the numbers out of the 107 with a screaming eagle tuner are 119 ft/lbs of torque and 106 horsepower. So.. yeah. I’m happy! Ride safe-ish!

  • @Mongo11b
    @Mongo11b ปีที่แล้ว +1

    The LRST is the exact reason I’m super critical on Harley parts. Everything they sell is EPA compliant.

  • @SOONERS918
    @SOONERS918 ปีที่แล้ว +1

    Those are good numbers but a lot of people only look at numbers and fail to see that torque dip in the curve

    • @freedom6919741
      @freedom6919741 ปีที่แล้ว

      It’s the space under the curve that matters.

  • @nightwolf5909
    @nightwolf5909 ปีที่แล้ว +1

    Sweet looking and running scoot..
    131ish T-Man pistons and rings with T-man 3262 and D&D
    2 into 1, Power vision turner
    156 torque and 156 HP
    2020 Road Glide special

  • @duder280z
    @duder280z ปีที่แล้ว

    That idle is the #1 reason I want to go with an S&S 475 when I do stage 2 this winter. Fuck yeah!

  • @Jim_Berry
    @Jim_Berry ปีที่แล้ว +1

    Sounds great! I would name it “Green with Envy”.

  • @louisthompson732
    @louisthompson732 ปีที่แล้ว +1

    Sounds great

  • @charleycavanaugh5414
    @charleycavanaugh5414 ปีที่แล้ว

    I love it when you Lie Like a rug about where you ride your bike . God Bless you and your Family . Amen Love ya Bro.

  • @RoadglideDad
    @RoadglideDad ปีที่แล้ว

    My 107 puts out 110 hp & 118 torque w/ Klockwerks Dominator full exhaust Performance inserts, Red shift Zippers 468 cam. Love it.

  • @freedom6919741
    @freedom6919741 ปีที่แล้ว

    124 dark horse crank SE 64 mm throttle body Cycle Rama 480 cam S&S sidewinder 2 into 1 stock heads Baker Grudge box 133/146. Makes 145 ftlbs at 2500 rpm. It built for 2 up touring.

  • @jameszee7585
    @jameszee7585 ปีที่แล้ว +2

    I realize my opinion really doesn’t matter….😉😉😉 Really impressed with the sound of the exhaust. I never usually like any type of fish tails… Your bike sounds great!!!! Ride safe, hopefully we run into you at Sturgis again…

  • @bfereclipse156
    @bfereclipse156 ปีที่แล้ว +1

    Gawd damn she sounds amazing bud!!!

  • @jasonholby8915
    @jasonholby8915 ปีที่แล้ว +1

    I am curious to Dyno mine. I bought it with the work done. It started as a 107, was bumped to a 114. So my guess would be it was just piston and jugs, so a shorter stroke bigger bore 114. Plus a RS 468, D&D 2-1, 5.5 injectors and a Fuel moto ac/dc air cleaner.

  • @stinde666
    @stinde666 ปีที่แล้ว

    NOW it has the great gallop 🎉 sounds awesome 👍

  • @rollinggordo9945
    @rollinggordo9945 ปีที่แล้ว +1

    Put a Feuling 543 cam in my 2011 Fat Boy. Best thing I ever did for it. It finally has pull and the lope sounds awesome

  • @HarleyGeezer1954
    @HarleyGeezer1954 ปีที่แล้ว +1

    I went with the S&S 465 for better torque on the 2020 RG. I went with the cam chest kit and did the entire low end. I even did the black pushrod covers. The only thing I regret is the Thunder Max. I should have used the Dynojet for better fine tuning. My gas mileage sucks bad.

    • @rickyhawkins7407
      @rickyhawkins7407 ปีที่แล้ว

      I having the same issue with my Thundermax. The bike seems to run fine, but my gas mileage sucks.
      I had my dealer do the 114 Stage 4 when I purchased it in 2018. I need to find someone in my area who knows how to tune a Thundermax.

  • @Brav-bg9kq
    @Brav-bg9kq ปีที่แล้ว

    This was really cool to see. Thanks!

  • @michaelterry885
    @michaelterry885 ปีที่แล้ว

    Flhtcu twin cam woods 555 v&h power dual head pipe 4 inch jack pot outlaw mufflers and Arlen ness inverted air cleaner rest of motor stock went from 75 hp to 95 and 90 torque to 100 awesome video like the color god bless

  • @bigblue3568
    @bigblue3568 ปีที่แล้ว +1

    Stage II can be easily down in just a couple of hours... or less. Always fascinating to watch techs pull push rod covers, turn the rear wheel to watch them move up and down to find TDC before cutting stock rods... ALL you have to do is take off cam cover which you have to do anyways and use the timing marks on the sprockets for exact TDC. After market cam plates better? Sure but local shop owner has never seen a stock cam plate fail in over 20 years.

  • @mrfoomutt
    @mrfoomutt ปีที่แล้ว

    LMAO. Loved it Keeping you busy.

  • @Wolfpack6D
    @Wolfpack6D ปีที่แล้ว +1

    That is what I want mine to sound like

  • @jasonbreedlove495
    @jasonbreedlove495 ปีที่แล้ว +1

    It's good to see how it does on a similar build. I'm torn between the S&S 475 and the zippers 468 in my 21 RKS. Running jackpot 2-1-2 and 4.5 TABs and of course zombies.
    Dig the lope bud.

    • @gottagowithjoe1
      @gottagowithjoe1 ปีที่แล้ว +1

      I have the 474 rocket cam on my 2019 114. 124hp and 134tq

  • @formdog9861
    @formdog9861 2 หลายเดือนก่อน

    sounds mean love the lope nice bike

  • @RobAshton44
    @RobAshton44 ปีที่แล้ว

    I got the 475c cam in my 119 GREAT CAM . POWER AND SOUND!

  • @richardrussell500
    @richardrussell500 ปีที่แล้ว +1

    Did he check the crank runout? I have read that a run out greater than 5 thousands of an inch is what causes premature oil pump failure, and in turn causes sumping issues.

    • @williamvaughan6448
      @williamvaughan6448 ปีที่แล้ว +2

      Ideally, both crank and pinion runout should be checked for Total Indicated Runout(TIR)....that being said, S&S says not to install their cam plate if you're over 5 thou, under 3 thou if you're wanting gear drive. Harley is actually pretty good about checking it before upgrades. May depend on the shop, but always ask.

  • @okiemale1589
    @okiemale1589 ปีที่แล้ว +1

    Hopefully I only have another 4 weeks of waiting for the parts for my 2015 Ultra...
    Going Screaming Eagle stage 4 so... can't wait...

    • @csolivais1979
      @csolivais1979 ปีที่แล้ว +1

      ​@@Peter-nm1psbecause now it's not as "slow" as it was before.

    • @csolivais1979
      @csolivais1979 ปีที่แล้ว

      @@Peter-nm1ps meh, people like what they like. Some people would prefer to have a Porsche or Lambo, some would rather have a '68 Chevelle. Different things for different people.

  • @genekelley7579
    @genekelley7579 ปีที่แล้ว

    🛑🛑 I do like the “ loping sound” of that cam. 👍
    I would have liked to heard the Zippers Cam.
    I have heard folks really talking them up, however I have yet to run into one on the road.
    Great Build, Buddy!!
    I like how you are going about making the bike “unique”. 👍💯

  • @byoung8528
    @byoung8528 ปีที่แล้ว +2

    Running the 475 in my 107 for three years with a F/M tune with decatted head pipe. went through four different sets of slip ons and a definite improvement in performance but the clutch side lazy pipe did not have the velocity to push the exhaust gases away from the bike. Sitting at a light or in rally traffic it was borderline unbearable, put a Khrome werks outlaw 2into1 and I have found the performance and sound I was looking for and no longer asphyxiate the wife, although I do snap her neck with the torque.

    • @joesainato8051
      @joesainato8051 ปีที่แล้ว

      I bet it runs good. Just my two cents with those FM tunes take it to a good dyno guy. You may not get a whole lot more in terms of numbers but it will clean it up and get you the power how it should be. It’s a good starting point but my 107 was completely different after tune

  • @robertperry5272
    @robertperry5272 ปีที่แล้ว +1

    Great Video

  • @1badsteed
    @1badsteed ปีที่แล้ว

    Sounds incredible! Wubda wubda wubda!!!

  • @TheMilitaryBiker
    @TheMilitaryBiker ปีที่แล้ว +1

    Looks and sounds awesome mate..tidy! ✌️

  • @THEM_ROBINSONZ
    @THEM_ROBINSONZ ปีที่แล้ว +1

    2020 road glide
    S&S 128
    All the same stuff as my road king
    138hp 148tq

  • @riskymedic4237
    @riskymedic4237 ปีที่แล้ว

    I will be down at Those Dyno Guys in June for my Cam and tune on my Victory Cross Country Tour. I will see how much louder and how much power hes able to get out of mine. Running Andrews cams and Vance & Hines slip ons.

  • @michaelsturdivant9571
    @michaelsturdivant9571 ปีที่แล้ว +1

    I bet your neighbors dislike you sometimes. But sweet sounding ride.

  • @775summit2
    @775summit2 ปีที่แล้ว

    I did the Harley torque cam got it tuned and it hit 100 horse and 120 ft lb on a stock 114

  • @kurtfirestone2761
    @kurtfirestone2761 ปีที่แล้ว +1

    475 is a good cam for higher RPM riding if you want mpre low end tq go with the 465. It depends how you ride

  • @canttalk
    @canttalk ปีที่แล้ว

    Mine does 116 hp and 130 torque with s&s 475 stage 2 stock throttle body. I have 2-1 exhaust powervison tuner and target tune though after the dyno tune. Before dyno tune 102 hp and 120 torque from a fuel moto emailed tune they sent me. I have a 2019 breakout m8 114 by the way.

  • @bdtodd50todd38
    @bdtodd50todd38 ปีที่แล้ว

    The idle does sound great.

  • @markmcintosh7095
    @markmcintosh7095 ปีที่แล้ว +1

    The numbers seem good for a cam swap.

  • @blackedoutbandit
    @blackedoutbandit ปีที่แล้ว

    Mine is just a stage 2 with the woods WM8-22X-E and tuned with dyno jet. It make 114hp and 128 torque

  • @ejdtm
    @ejdtm ปีที่แล้ว

    The 131 EPA = warranty. Green paint looks great

  • @johnstrickland9545
    @johnstrickland9545 10 หลายเดือนก่อน

    The bike sound's awesome man

  • @KenMrKLC
    @KenMrKLC ปีที่แล้ว

    2017 SGS 107 V&H Pipes DeCat stock head pipe Dynojet UYpdated oil pump HD hp cam 109hp 120tq

  • @dwight072
    @dwight072 ปีที่แล้ว

    I have a 114 S&S 475 on power vision D&D 2:1 and it made 118hp and 131tq.

  • @DrHarley
    @DrHarley ปีที่แล้ว

    My 114 when it was only Stage 2, 114 HP and 130 TQ. after the motor swap. 140HP and 160TQ.

  • @rynomotorsports3737
    @rynomotorsports3737 ปีที่แล้ว

    If you install the 2.5in louvered baffle it will tone down the sound and help your torque at 2-3k rpm while maintaining the flow in the top end. I didn’t realize your in Florida as well !!

  • @travisgray3331
    @travisgray3331 ปีที่แล้ว +1

    131 is under warranty…yes epa compliant but maybe mention the warranty it’s under. 114 no more warranty…but you knew that💪

  • @stanwerner7484
    @stanwerner7484 ปีที่แล้ว +1

    I wonder if "Porting the heads" would increase the "Numbers" ?

  • @Mr07explorer
    @Mr07explorer ปีที่แล้ว +1

    Not enough. Needs a sneaky pete nitro kit!!!

  • @JA-zh5xi
    @JA-zh5xi ปีที่แล้ว

    That is a great sound!

  • @dannydlowbikertv
    @dannydlowbikertv ปีที่แล้ว +1

    Very impressive on hp, and man that thing sounds great. Very nice ... I'm doing andrew 57h in my road glide this week. I just hope it sounds like yours, I don't even care about the power. Lol

  • @vincentmurante5142
    @vincentmurante5142 ปีที่แล้ว

    121 torque 112 HP on a 2017... 107 cu...tts tuner... Rinehart 2-1-2 head pipe... 4" Rinehart muffler....Rinehart big sucker air cleaner with a s&s 475

  • @crazyeyez1502
    @crazyeyez1502 ปีที่แล้ว +2

    When you say he starts all dyno sessions on a stock tune, does that mean he overwrites you autotunes back to a factory tune?

  • @jesstreloar7706
    @jesstreloar7706 ปีที่แล้ว

    Home decorator vice a builder of homes? I do love the builds.

  • @bradleyyounger8499
    @bradleyyounger8499 ปีที่แล้ว

    Looking great sounds great

  • @williamhelfrich8242
    @williamhelfrich8242 ปีที่แล้ว

    That bike sounds awesome

  • @00002330000
    @00002330000 ปีที่แล้ว +1

    I have a 107 @ 107hp 122 trq

  • @HOOLIGANfilmz
    @HOOLIGANfilmz ปีที่แล้ว

    Great build bro!

  • @aswmkid3
    @aswmkid3 ปีที่แล้ว +1

    I'm starting to think if you can't play hot for teacher to the rumble at idle its too smooth.

  • @rludwig1000
    @rludwig1000 ปีที่แล้ว

    HA! I KNEW you had a mechanic hiding somewhere...

  • @shdbmw
    @shdbmw ปีที่แล้ว

    Sounds great !!

  • @williamrose8944
    @williamrose8944 ปีที่แล้ว

    EGS 107 s/s 55 mm aluminum intake stock pipe modified, 30/30 , Arlen Ness Big sucker Tab 4.5 with 2.5 baffles 117 hp & 120tq

  • @darrenschneider9722
    @darrenschneider9722 ปีที่แล้ว

    Sounds good 😮

  • @Jeffmd2020
    @Jeffmd2020 ปีที่แล้ว

    I have a 2007 street glide with the 96” 6 speed and I’d love to do a cam job on her but when it comes to cams I don’t know shit about fuck!! I know I want a nice beautiful lope but having the smaller fuel tank on the 07 I don’t want to sacrifice much MPG’s!! I’d love to do a gear swap also to get rid of any potential cam chain tensioner issues in the future but like I said I’m completely clueless when it comes to picking the right cam!! Any advice would be greatly appreciated brother!! LOVE the new body swap by the way!!

  • @headcase833
    @headcase833 ปีที่แล้ว +1

    Is it just me or does Billy give off some Steve Buscemi vibes?

    • @Mrsmonkey5151
      @Mrsmonkey5151 ปีที่แล้ว +1

      😂😂 now that you mention it…

  • @hirammendez4686
    @hirammendez4686 ปีที่แล้ว

    Sounds great!

  • @hd_av_traveler1495
    @hd_av_traveler1495 ปีที่แล้ว

    awesome video as always

  • @stephenbirch9436
    @stephenbirch9436 ปีที่แล้ว

    Love It 💯🐒

  • @IndigenousSteed
    @IndigenousSteed ปีที่แล้ว

    That's impressive for what it is. I would be curious what my v124 s&s evo would run as is.

  • @joshwagner8954
    @joshwagner8954 ปีที่แล้ว +1

    I just did a stage 2 on my 2019 RGS...I was concerned about keeping my extended warranty so I went with all SE stuff, Stage 2 torque kit. There's noticable gains but it really wasn't worth the cost. I kinda regret it and wish I'd gone aftermarket and definitely not the SE tuner.

    • @ProfessionalMonkey
      @ProfessionalMonkey  ปีที่แล้ว +1

      Sorry you're disappointed, but I get wanting to preserve your warranty.

  • @booxilla.1968
    @booxilla.1968 ปีที่แล้ว +1

    When I got my 21 RG, the guy at the dealer was telling me I could get my 107 upgraded to the 131 and still be under warranty. I asked him, with such a big motor, what is the top speed of the bike with the 131? He told me that the speed limiter wouldn't change for the 110-112 top end speed. So I asked him what is the point in getting a bigger motor if the top speed is going to stay the same. Dude looked at me with a serious look and said, "you'll get there faster.". 8 grand just to get to 110 faster than the other bikes, and then watch them leave me looking at their backs? No thank you.

    • @ProfessionalMonkey
      @ProfessionalMonkey  ปีที่แล้ว +1

      You can turn the limiter off with an aftermarket tuner and speed right into your coffin if that’s your wish.

    • @booxilla.1968
      @booxilla.1968 ปีที่แล้ว

      @@ProfessionalMonkey no, my wish would be NOT to pay a ridiculous amount of money for an engine, THEN pay a few extra hundred bucks just to get the thing to do the stuff it is supposed to do in the first place. And hopefully my trip to my coffin will be a slow, drawn out process, taking YEARS to accomplish.

  • @newenglandbiker2220
    @newenglandbiker2220 ปีที่แล้ว +1

    Completely stock 2021 114 I have 101 horse and 121 torque

  • @ppetrey
    @ppetrey ปีที่แล้ว +1

    Damn Monkey that bike sounds sooooo good.

  • @bmwdan3445
    @bmwdan3445 ปีที่แล้ว +1

    I don’t believe you have to pull the heads just the valve covers if you want to reuse the stock push rods. Was a new oil pump really necessary? Or did you just want to make everything S&S? Thank looks and sounds awesome my friend!!

  • @samfrankow3167
    @samfrankow3167 ปีที่แล้ว +1

    It might be the Canadian in me, but I'm wondering what the plate reads?