Have had and used the Wave for years, always frustrated that I would pull the serrated blade instead of straight edge; just realized the serrated one has marks at the top of the back side of the blade to extinguish this. Just found out about the lanyard hole from this video; thanks for the video and I hope my comment helps save others the frustration!
I wish they would make a Wave with that magical steel that was used to forge Excalibur. You need the absolute best steel there is for a multitool so that you can do all those chores that a multitool is regularly used for, like chopping and batoning wood, killing wild hogs or melting down the multitool and using the steel to build a suspension bridge that fully loaded 18 wheelers can drive over. Who cares if it's way overpriced? You need that top shelf steel.
Just ordered the wave + directly from Leatherman. They were running a special, 20% off for the tool with the leather sheath, $79.96. They call it the heritage wave plus. I have a surge in my get home bag with the 41 piece bit kit and extender. I'm putting together a new edc pouch with the Vanquest huge maximizer and the wave + will go in that. Hard to beat Leatherman's quality and 25 year warranty. I broke the tip of the flathead screwdriver on my surge trying to pry something and they replaced it and shipped it back to me in less than two weeks. Excellent!
I'm wishing they would bring back the original tool design (not in the form of a $275 collectors edition). It was thinner than most of the newer designs which have fatter handles and therefore it was more pocketable, but still had most of the tools.
I don't leave the house with my Leatherman Wave+ in a sheath on my belt, so used to it if I repair or fix something at my workbench with all the tools I need handy , I still grab my wave+ many times.
I’m so happy that they have the replaceable wire cutters. That’s one reason I preferred the Rebar. I find the Rebar is good for working around the house because of the longer Phillips and awl. But for all around utility the Wave wins. I often need that jewelers screwdriver and scissors.
I think all they need to do now is make the pliers spring-loaded and that's it - the perfect multi tool. One of my tests for any multi tool is can you wire a plug with it? In the UK the answer is usually no, because you need that needle flat-head/Philips screwdriver to complete the job. The Wave passes that little test
Great review! I actually prefer the non-removable sheaths, I've found that over time the snaps loosen up and my sheaths will pop open while I'm working.
What they should have also changed besides the plier head is to get rid of the serrated edge blade, and put the large scissors from the surge and replace small scissors with an awl
I think the wave is best as it is I use the serrated blade alot and the surge scissors are probably too big to fit+you can take a bit from the bit kit and sharpen it to turn it into an awl
I own a wave plus and purchased an extra bit kit , bit extender and a larger sheath that accommodates all the extras as well as the tool it's self I also have a 1/2 " by 6 " ferro rod that fits into an elastic sleeve on the side of the larger sheath I definitely recommend the bit extender it accommodates leatherman bits and also standard driver bits
I just ordered the new Surge and all the accessories. All the bits, extention for the bits, extra blades etc. Stoked. Almost as stoked as when i received my Large Chris Reeve Subenza. The extra weight wont bother me.
I don't know if my Wave came faulty but I find that mini glasses screwdriver useless (both ends, the Phillips head as well as the flat head) because they will not fit into the screw, they're too thick. This particular tool is not up to par with Leatherman's Swiss competitor, Victorinox. All other tools are great and comparable with Victorinox.
I really can't decide which leatherman model to get. My prefferable tools are pliers, knife, saw and scissors, don't really care much about other things. Wingman seems to lack the saw, sidekick, scissors. Wave + has both, but the price is also double for having only one usefull tool more which I would preffer. Bummer. Any tips? I also heard about the "mods" but I doubt it would be possible to add scissors to sidekick for example, without spending a fortune, in which regard, I would just go for wave +.
ive been looking for this but could only find the old one, thanks! glad i havent been able to purchase one until now actually. i want the replaceable cutters
That’s great that they added the replaceable wire cutters. I wish they could make the handles in aluminum instead of steel so that they could lighten the tool. I’ve been asking them for years and never got a response. I also wish they could put the Juice scissors instead of the ones they have on there now. It’d be perfect with those scissors and with a light weight handle.
No! The flat screwdriver is great for prying paint can lids and such. Take the bit kit if you have it and find the most useless bit and sharpen the end of it, it works just fine. I actually made a whole new awl-bit from a broken drill bit.
I'm sure the replaceable wire cutter compromises the strength of the pliers, but how much? Too much? I can see the benefit but it worries a bit. Well i guess they have tested and think this is the way to go. It has the warranty after all.
EDC with Aaron, the charge is the wave with upgraded steel, like Ben said, charge + models now available with replaceable wire cutters. So basically what you described.
I have a question for long time wave users. Does the quality of the classic wave and recent wave differ??? I mean the production, the feel, the quality of material, etc.
Hey, if anyone reads this, and has owned a multi tool with or without replaceable wire cutter/stripper, i wanna know if the replacement option really makes a world of difference? Also, do these cutters/strippers get chipped or broken, or maybe get worn down easily? :/
They're strong they will take a beating but eventually get dull but they have lasted a long time, just send it in to leatherman and they will replace them free they have awesome warranty. I have the old wave and the 2018 model
i carry a swiss army knife pioneer....but on my bike tool bag, and in my works bag i have a pair of pliers/ cutters and an adjustable bacho spanner.....cost about 10 pounds.. dont really unders5tand the purpose of the leatherman ..i think its a cool geek tool but normally you know when you will need pliers...and spanners..and the leartherman doesnt even have an adjustable spanner... cant see the use of the tool... and no way am i gonna carry a full set of pliers to the shop with me or to the office.
I have asked for a Belt Clip Sheath for years and they keep telling me that I am the only person that wants one. I don't wear a belt and a Belt Clip would be nice to just put it on my Waistband!
Anyone have a problem with the handles trying to open in pocket when you have tool on a clip instead belt holder????? Do you know how to fix this problem?
Maybe so but let's appreciate that if they think it's already perfect, they don't make it worse for the sake of inventing and selling something new. They only do what they think is necessary. It seems they consider this as a tool, not a toy and i'm super happy for that attitude.
Please people, stop spending money paying more on multi tools and knives then what they’re worth, only buy when discounted on sale or clearance. They are marked up so much and over inflated what an easy market to make money off of sheeple. I bought a Leatherman wing man about four years ago-plus for 24.99 on sale I see the cheapest anywhere is going for 40 bucks what a disgrace. it’s an outdated design but effective yet they keep charging more money for it because idiots keep buying them for higher prices. I just bought a Leatherman wave for $57 I would not pay anymore for that.
no where on this tool does it state country of manufacture. it could be made in America or be a genuine china junk. it doesn't say. many tools say one way or the other
I’ve had a wave for 4 years and I am just learning about the key ring!
Blew my mind
Have had and used the Wave for years, always frustrated that I would pull the serrated blade instead of straight edge; just realized the serrated one has marks at the top of the back side of the blade to extinguish this. Just found out about the lanyard hole from this video; thanks for the video and I hope my comment helps save others the frustration!
Just read this now. Won't lie, changed my life. Thanks so much👍🤣
I wish they would make a Wave with that magical steel that was used to forge Excalibur. You need the absolute best steel there is for a multitool so that you can do all those chores that a multitool is regularly used for, like chopping and batoning wood, killing wild hogs or melting down the multitool and using the steel to build a suspension bridge that fully loaded 18 wheelers can drive over. Who cares if it's way overpriced? You need that top shelf steel.
Sarcasm?
:D
Imma be back to like this on another account
Imma be back to like this on my third account
Im fresh outta accounts my guy but just maybe just maybe more people will like this and those damn snobs will figure it out
Steve Just Stuff - He'll no. I'd rather stick with Leatherman. 😆
Just ordered the wave + directly from Leatherman. They were running a special, 20% off for the tool with the leather sheath, $79.96. They call it the heritage wave plus. I have a surge in my get home bag with the 41 piece bit kit and extender. I'm putting together a new edc pouch with the Vanquest huge maximizer and the wave + will go in that. Hard to beat Leatherman's quality and 25 year warranty. I broke the tip of the flathead screwdriver on my surge trying to pry something and they replaced it and shipped it back to me in less than two weeks. Excellent!
I'm wishing they would bring back the original tool design (not in the form of a $275 collectors edition). It was thinner than most of the newer designs which have fatter handles and therefore it was more pocketable, but still had most of the tools.
Jeff Jones Love my crunch for that.
how are you verified ?
What happens when you go here?
th-cam.com/users/verify
Just one of the reasons I carry the Rebar... lighter and more compact when folded than any of the other rugged high tool count Leathermen.
Jeff Jones the f*ck? It says I'm already verified
Not sure how they can upgrade perfection .
But your review has convinced me.
I don't leave the house with my Leatherman Wave+ in a sheath on my belt, so used to it if I repair or fix something at my workbench with all the tools I need handy , I still grab my wave+ many times.
I am in love with the wave🤩😘😍❤
Bought it today.
I’m so happy that they have the replaceable wire cutters. That’s one reason I preferred the Rebar. I find the Rebar is good for working around the house because of the longer Phillips and awl. But for all around utility the Wave wins. I often need that jewelers screwdriver and scissors.
I think all they need to do now is make the pliers spring-loaded and that's it - the perfect multi tool. One of my tests for any multi tool is can you wire a plug with it? In the UK the answer is usually no, because you need that needle flat-head/Philips screwdriver to complete the job. The Wave passes that little test
Nice video. Clear, straightforward and a good display of the tool.
Great review! I actually prefer the non-removable sheaths, I've found that over time the snaps loosen up and my sheaths will pop open while I'm working.
What they should have also changed besides the plier head is to get rid of the serrated edge blade, and put the large scissors from the surge and replace small scissors with an awl
Then they will call that a different model name :))
I think the wave is best as it is I use the serrated blade alot and the surge scissors are probably too big to fit+you can take a bit from the bit kit and sharpen it to turn it into an awl
The bottle opener is a can opener as well
Watched a few other videos after picking this multi-tool out and you are the first one to show the lanyard ring! Cool! Will definitely share this!
I own a wave plus and purchased an extra bit kit , bit extender and a larger sheath that accommodates all the extras as well as the tool it's self I also have a 1/2 " by 6 " ferro rod that fits into an elastic sleeve on the side of the larger sheath I definitely recommend the bit extender it accommodates leatherman bits and also standard driver bits
The Wave is worth every dollar
I just ordered the new Surge and all the accessories. All the bits, extention for the bits, extra blades etc. Stoked. Almost as stoked as when i received my Large Chris Reeve Subenza. The extra weight wont bother me.
You probably knew this, but people always demo the pliers forward of the hinge. Behind the hinge is where the wire crimpers are. Cheers mate.
I don't know if my Wave came faulty but I find that mini glasses screwdriver useless (both ends, the Phillips head as well as the flat head) because they will not fit into the screw, they're too thick. This particular tool is not up to par with Leatherman's Swiss competitor, Victorinox. All other tools are great and comparable with Victorinox.
I have own 2 leatherman before owing the leatherman wave +. Love it, and will not be returning back to the 1st gen.
Finally! An update for the legendary wave! 🎉🎉🎉
I choose the wingman over the wave because of the spring action, lighter and the scissors are bigger.
I really can't decide which leatherman model to get. My prefferable tools are pliers, knife, saw and scissors, don't really care much about other things. Wingman seems to lack the saw, sidekick, scissors. Wave + has both, but the price is also double for having only one usefull tool more which I would preffer. Bummer. Any tips? I also heard about the "mods" but I doubt it would be possible to add scissors to sidekick for example, without spending a fortune, in which regard, I would just go for wave +.
Thanks for a look at the new Wave, Ben. Nice upgrades. Pretty nice! Blessings bro!
the "bullet primer snap" on the sheath
I got the two tone wave last year and love it, I don’t use the wire cutters enough to be concerned about replacing them but I would like the sheath
About time it took them long enough.
Thanks Ben, I've been thinking about this as a middle ground between my signal and supertool
Leatherman make a great product and warranty
ive been looking for this but could only find the old one, thanks! glad i havent been able to purchase one until now actually. i want the replaceable cutters
Best leather man they make.
That’s great that they added the replaceable wire cutters. I wish they could make the handles in aluminum instead of steel so that they could lighten the tool. I’ve been asking them for years and never got a response. I also wish they could put the Juice scissors instead of the ones they have on there now. It’d be perfect with those scissors and with a light weight handle.
great multitool. I upgrade my wave + with a Justin Wolfe leather sheath.
Gee, what a nice review of the Leatherman Wave + , I have the original Wave and maybe it is time to upgrade.
I have the original wave, now i need the post 2004 wave and the 2018 wave..
why need replacaple blades already have 25 years warranty?
They should have added an awl.
Warblerab 295 I agree, ditch that redundant big flat screwdriver for an awl. I wonder if there is a DYI mod for that?
No! The flat screwdriver is great for prying paint can lids and such. Take the bit kit if you have it and find the most useless bit and sharpen the end of it, it works just fine. I actually made a whole new awl-bit from a broken drill bit.
I second this! A punch of sorts is the only thing that i miss on mine.
Awl man! I was going to say that
I'm sure the replaceable wire cutter compromises the strength of the pliers, but how much? Too much? I can see the benefit but it worries a bit. Well i guess they have tested and think this is the way to go. It has the warranty after all.
You cant use the lanyard hole unless you use a lanyard that doesnt get cut off when you open the closest blade !
Plus I have the upgraded surge great 👍 tools 🔧
May I know what camera do you use? The picture and mic quality is really great!
No Velcro please , I want mine to stay where it’s at , safely on my belt . It is used at least 5-1/2 days a week . No Velcro nothing for my vote
They should have upgraded the blade steel or at least offer 154cm or s35vn/S30V blades for purchase on the site, and for the serrated as well.
EDC with Aaron, the charge is the wave with upgraded steel, like Ben said, charge + models now available with replaceable wire cutters. So basically what you described.
100% AGREE. Time for upgraded BLADE STEEL! S35VN is my standard blade steel. It's even AMERICAN MADE!
My chArge has s30v blade.
So does mine but I want new models with premium steel. I really want to smaller multi-tool with S35VN or elmax. I would even settle for M390.
I'd be happy if they upgraded it just a bit....440C or D2... something easy to sharpen by hand and doesn't break the bank...
I have a question for long time wave users. Does the quality of the classic wave and recent wave differ??? I mean the production, the feel, the quality of material, etc.
I have the last model and carry it in a NITE-IZE sheath! Works great!
Hi, could you do a review on pocket fishermen or pocket fishing kits. Appreciate it.
Hey, if anyone reads this, and has owned a multi tool with or without replaceable wire cutter/stripper, i wanna know if the replacement option really makes a world of difference? Also, do these cutters/strippers get chipped or broken, or maybe get worn down easily? :/
They're strong they will take a beating but eventually get dull but they have lasted a long time, just send it in to leatherman and they will replace them free they have awesome warranty. I have the old wave and the 2018 model
I've got an old Wave (non +) and it's got the replaceable cutters...
Like the glasses tool and the having tools for use on the handle without having to open it.
Well. That’s sucks. Now I have to buy a new Wave.
Sup Ben! Thanks for sharing bro
thanks man
Good review keep it up
Still kinda of heavy for a EDC on the pocket
Yours works like 100x better than any wave I have handled ! Did they send you that one to review ?
Cheers Mate!
cool man thanks!!
Seems the big question is - how much are the new replacement pieces? Which you never said. If they are a rip off I may get the old one.
I have three waves to newer. version😁
I have a hard time piling out the lanyard at 3:48
They should have taken out that tiny ass eye glass screwdriver and put an awl in it's place.
Amazon ripped me off $100.00 in a $400.00 knife deal when some were stolen from the mail ! And refused to refund !
Well this is awesome
What is the Gerbers version of the wave? Gerbers direct competition to the wave?
i carry a swiss army knife pioneer....but on my bike tool bag, and in my works bag i have a pair of pliers/ cutters and an adjustable bacho spanner.....cost about 10 pounds..
dont really unders5tand the purpose of the leatherman ..i think its a cool geek tool
but normally you know when you will need pliers...and spanners..and the leartherman doesnt even have an adjustable spanner...
cant see the use of the tool...
and no way am i gonna carry a full set of pliers to the shop with me or to the office.
A leatherman without a leather sheet?
I have asked for a Belt Clip Sheath for years and they keep telling me that I am the only person that wants one. I don't wear a belt and a Belt Clip would be nice to just put it on my Waistband!
www.raegearusa.com/product-lines
What do people use the scissors for? I have used multitools for years, never use the scissors. I use the blade to cut things.
RideByNight I cut my nails with mine all the time
@@87twistidrizzo
Me too
Sometimes I need to cut electrical tape instead of tearing it, or many other things
Awesome! Growing your hair out, Ben?
As long as it keeps snowing, lol.
Living Survival I hear that. Got hit again here in Pittsburgh two days ago. Old man winter ain't going out quietly this year.
Living Survival ha, ponytails next😂
Shame it doesn't have a hair clipper attachment.... ;-)
yes, shame.
The Surge is still the best model of Leatherman, period.
This is a lot of multi-tool
Are you Coppercab's dad?
I bought the super tool 300 but the thing is stiff and it won’t open the handle keeps closing up
They loosen up over time. Try some oil.
Some people aren't smart.
Obviously
Anyone have a problem with the handles trying to open in pocket when you have tool on a clip instead belt holder????? Do you know how to
fix this problem?
Eric Buttice tighten your hardware
@@_hawawa4930 just with the torx?
Eric Buttice yep
Alright I haven't tried just got this a week ago didn't see anything on it
Damn...leatherman late to the game and short of ideas.... this mod was done years ago as a DIY... the plier head from the Rebar swapped onto the wave.
Maybe so but let's appreciate that if they think it's already perfect, they don't make it worse for the sake of inventing and selling something new. They only do what they think is necessary. It seems they consider this as a tool, not a toy and i'm super happy for that attitude.
About the plier head, the jaw part specificly. Is it harder to fit larger bolts than original wave?
Zach Galifianakis
?
JK
The scissors look very flimsy and poor.
& hear I am using the old Wave like an idiot. 😠
Am I the only one who thinks that the Victorinox Spirit X is way better than the Wave??
Yes, you might really be the only one.
absolutely! you are the only one!
The only one on our universe.
LOL
Hihi. Crazy.
👍👍👍.🇺🇲🌲🔥🔪
meh. Good overview though.
Please people, stop spending money paying more on multi tools and knives then what they’re worth, only buy when discounted on sale or clearance. They are marked up so much and over inflated what an easy market to make money off of sheeple. I bought a Leatherman wing man about four years ago-plus for 24.99 on sale I see the cheapest anywhere is going for 40 bucks what a disgrace. it’s an outdated design but effective yet they keep charging more money for it because idiots keep buying them for higher prices. I just bought a Leatherman wave for $57 I would not pay anymore for that.
Damn you've aged...
no where on this tool does it state country of manufacture. it could be made in America or be a genuine china junk. it doesn't say. many tools say one way or the other
Leatherman is getting lazy. No new good ideas in a while.
Make one good thing and milk it for decades ;)
Agree entirely. No big deal if you ask me. How many people realistically will use those wire cutters anyway?