How to mount an amplifier under a car seat and even a race seat.
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2021
- We show you how to properly mount an amplifier underneath a car seat. In our case we had to mount underneath a Bride racing set which made the installation much more difficult. We were able to get the proper clearance for the seat mechanism and were replaced and Alpine amp powering a subwoofer with a much larger 6-channel amp that powered the entire audio system.
Full System Install
• Full Car Audio install...
Sony XM-GS6DSP
www.qualitymobilevideo.com/xm-...
Tools Used:
Klein Diagonal Cutters: www.qualitymobilevideo.com/d2...
Klein Wire Stripper and Cutters: www.qualitymobilevideo.com/11...
Metra Pick Set: www.qualitymobilevideo.com/ib...
Klein Diagonal Cutters: www.qualitymobilevideo.com/d2...
Klein Tools Reversible Ratcheting Box Wrench Set: amzn.to/2W2gMVf
Swivel 3/8" Ratchet: amzn.to/2EsIpMc
Panel Pry Tools: amzn.to/2VJK9q9
Soldering Helping Hand: amzn.to/2M4pIEJ
Wire Pants:
10-12 Gauge Wire Pants www.qualitymobilevideo.com/43...
14-16 Gauge Wire Pants www.qualitymobilevideo.com/43...
16-18 Gauge Wire Pants www.qualitymobilevideo.com/43...
16-18 Gauge Wire Pants www.qualitymobilevideo.com/43...
14-16 Gauge Wire Pants www.qualitymobilevideo.com/43...
Miscellaneous Tools:
Countersunk Cap Screws: amzn.to/30AKZsW
Socket Head Cap Screws: amzn.to/2EtARZO
Button Heat Socket Cap Screws: amzn.to/2M9loEl
Aluminum Insert Nuts: amzn.to/2W8imoE
Miscellaneous Gear:
Tesa Fabric Tape: www.qualitymobilevideo.com/51...
8-1/2" Cable Tie: www.qualitymobilevideo.com/l-...
Adhesive Backed Cable Tie Mount: www.qualitymobilevideo.com/77...
Kester Solder: www.qualitymobilevideo.com/at...
Metra IBR32 Heat Shrink Tubing Kit: www.qualitymobilevideo.com/ib...
QMV Heat Shrink Tubing Kit: www.qualitymobilevideo.com/hs...
Clear Heat Shrink Kit: amzn.to/2YMuNDa
3/4" Flex Loom: www.qualitymobilevideo.com/sl...
Visit www.QualityMobileVideo.com for all of your car audio and video needs!
#amplifierinstall #xav8000 #carstereoinstall #sony
Subscribe to QMV Fast Tech for 12 Volt Tips: / @qmvfasttech
James has a Movie Podcast!!!
/ @raidersofthelostpodcast_
Get your QMV Merch today!
teespring.com/stores/qmv-offi...
Instagram: @qualitymobilevideo
Twitter: @qualitymobilevi
Facebook: / qualitymobilevideocom-... - ยานยนต์และพาหนะ
Instead of drilling through floorboards for amplifier deck construction adhesive works amazing 20yrs later i find it still bonding , dosen't require much
This like a real car and not a show car. That's is real helpful, a lot of this installs are trucks and expensive vehicles. Not everyday drivers. This information I can actually put to use.
That was a really clean install. I often wondered what the best way to secure an amp under the seat was. When I did mine I put some strips of wood under the carpet and screwed the amp into those but the nutserts and ABS panel is even better.
I love how you use the soldering iron on the shrink wrap. I never thought of that!
Beautiful work. Needed this to motivate my new install.
👌
nice and clean build!! i only wonder. why not cramp new pins for the speaker connection and plug it straight to the connector instead of soldering the wires. in my opion you would have a cleaner look and a better flow since there is no solderd connection.
Nice work... I appreciate the tracks too!!
Very clean. However, I’m not a fan of screwing amps right on carpet. I locate the plastic like you, then put it on top of the carpet and mount the amp to it, with a 1/4” spacer to allow for decent air flow. Personal preferences…
Yep exactly. Cause you never ever know, even if you got an expensive amp, that if that thing get a hot enough it's going to melt straight into the carpet and ruin it completely and possibly the amp with having melted plastic go into the internal amp pcb board
Doesn't it buzz like crazy with the rca's sip tide directly to the power cables?🤔
I have the same question. I always thought you were supposed to run them far apart from each other and bot cross path if you can. But i dont know??
Same notice here
He probably thought about it, normally the magnetic field affects the input signal. But perhaps his rca cables are shielded better. And also it would be a pain to get it up underneath the carpet to the other side without seeing it bulge up.🤷🏼♂️
Rick Ensink maybe. But i think running the rca along side the center console would be just fine. Shorter distance. The rcas being flat will not bulge up at all. But maybe those are higher grade rcas, like you said. 🤷♂️
Properly shielded wire should be fine
Amazing job...watching from Brazil.
Amp´s with high input, this cable (metraMc) is wonderfull.
Glad you like it!
where and how far from the amp did you secure the ground wire ?
Nice job Lorenzo!
Thank you! Cheers!
Great stuff guys where can i buy the instrumentals that you feature?
Great vid! Subscribed. Thumbs up!👍
Thanks for the sub!
Are you suppose to mount the install bay under the carpet. I seen another video saying you have to install the amp to the install bay and then mount it under the seat. I'm using that exact same amp you removed, lol.
Noti gang love from West Palm Beach FL
Nice clean install ! What size screw did you Susie to mount the amp to the abs? Thanks!
Clean simple install, but wouldn't you get signal noise when you run the power lead cables in close proximity with the audio cables?
Just wanted to ask?
If i have a 4 channel amp at 2x 4ohm's bridged and a single dual voice coil sub at 4 ohm's can i just wire each bridged channel to a coil?
also is RMS on dual voice coil sub's measured per coil or together?
Best Regards
Martin
Good work however I noticed at 3:59 the crimper you were using for the 4 gauge is only rated for 10 gauge and up wire. A hydraulic press one would of worked better. Again nice work!
Link for the mounting plate ?
I wanna know 1 thing, HOW do you do still not have a video on the Sony XAVAX1000???
Neat install but not too sure about drilling straight through the floor. I've got the same car and guess I'll be make the mount using those structural rails instead.
Would an LC7I have any benefit for this amp?
What size rivnuts did you use? M3, M4?
How does that sony sound ?
What is the purpose of the plastic mat
Hi.. Brother, may I ask you something please?, I have the same amplifier Sony XM-GS6DSP, when I connect via Bluetooth the sound was load, but when I test via head unit there's isn't any sound just silent, I had setting HPF on/off still not working, help me Brother, thanks before & stay safe 🙏🤗
Keep these how to videos coming. And, Lorenzo used high quality fork terminals to wire the amp......my question, where can I get the same?
www.qualitymobilevideo.com/us410-50.html
www.qualitymobilevideo.com/us810.html
www.qualitymobilevideo.com/us410-1.html
www.qualitymobilevideo.com/ibr15.html
www.qualitymobilevideo.com/113.html
How do you guys tune your amplifiers? Multi meter or smdd 1
Cheapest most accurate way I've seen is to get a multimeter and 0db test tones at the Freq you want to begin your cut off. Then play the tones at a low volume, measure the voltage as you turn the crossover when it starts to drop you hit the Freq number your looking for. If your xover has a slope adjustment you will want to repeat the process if you change the slope from 6, 12, 18 etc. This can also be done with high pass and low pass. Play the desired tone and watch the voltage as you turn the knobs....
Cables de corriente y rca juntos ??? Ummmmm eso suena a mucho ruido
👍
am I missing something?? :Why would you ever use high level inputs when you have the luxury of having an old car that accepts an aftermarket stereo??
warranties
.... Gives the other shop shit about drywall screws and then mutilates that crimp with the wrong crimpers...
Racing seats🤣🤣🤣
Signal wires ziptied to power wires...... 😢 not gonna mention the other stuff. Be careful watching and using TH-cam videos as a guide of "how to"