This allows you to see the expected behavior for vehicle in mission planner. This video will help you to make a waypoint navigation in mission planner.
There are two options available for sending waypoints. The standard speed option is slower but more reliable, while the fast option is quicker but carries a higher risk of errors. The standard speed option is recommended for critical operations.
It can wait for 10 seconds; if no action is taken by the operator within this period, it will disarm automatically. To extend this period, simply adjust the time in the full parameters tree then search DISARM DELAY.
Are you using GPS? Which telemetry radio are you using? Did you add takeoff commend in the mission? Try to takeoff in the loiter, then switch to auto.. Assign auto mode in the transmitter switch, then try..
today i tried it just works so well thanks for the video... looking for advance tutorials ...
Welcome..
@@karthikstechtime0910 can you make a video on mission continuing, drone should go to the last flying position after rtl...
can we add payload to this and simulate the speed and battery consumption?
can it make as log/bin from the mission after the simulation?
What is the write and writefast difference
There are two options available for sending waypoints. The standard speed option is slower but more reliable, while the fast option is quicker but carries a higher risk of errors. The standard speed option is recommended for critical operations.
Is it possible to make simulation for agri drone in Mission planner? If yes, can you pls make it?
Sure.. I will try
top , obrigado
after doing radio calibration, connected power to esc. but none of the servos are working including motor. what to do?
Safety switch off?
Disable prearm checks.
@@karthikstechtime0910 I was trying without safety switch. Still I changed to zero. But not working.
It says...Not sending telemetry as no current flight id is set
Which telemertry radio, are you using?
@karthikstechtime0910 how to find which telemetry radio I am using
after i arm it, its disarming itself
It can wait for 10 seconds; if no action is taken by the operator within this period, it will disarm automatically. To extend this period, simply adjust the time in the full parameters tree then search DISARM DELAY.
Do you have class that you train people
No. If you have any doubts.. I will help you out of that..
its coming mode mode change to auto failed could you please help?
Are you using GPS?
Which telemetry radio are you using?
Did you add takeoff commend in the mission?
Try to takeoff in the loiter, then switch to auto..
Assign auto mode in the transmitter switch, then try..
bro in simulation that virtual quadcopter is not showing,why?
Select stable firmware version? Update Mission planner..
Sir i am facing forced arm issue while simulation
Software version?
@@karthikstechtime0910 mission planner 1.3.80
Check the messages before you give arm. There is something wrong that couldn't allow the vehicle to start.
It's showing not ready to fly, pre arm motors : check frame class and type
Select the corresponding frame X.. Quad or Hexa
@@karthikstechtime0910 not working sir
Go to the full parameter list, check frame class, and select the type. Which platform is that?
@@karthikstechtime0910 frame class 1 , and frame type 1
Reboot once. It will not appear again.
Please sir delivery mission Hindi me bata do ek
Bro, can you please tell about rally points and how to user them?
Sure..
Are sir aap Hindi me bata do ye sab
Don't know hindi..