Bambu Lab Killer ??? Anycubic Kobra 3 Combo with ACE unboxing, assembly and review
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- Thank you for watching, this is just our opinion of this printer, we are not sponsored by Anycubic nor is this a paid review, we just think it is a great machine.
Check out our store: WWW.FPVBUILDSRC.COM
Check out The RC Air Experience podcast: / @rcairexperience
#3dprint #3dprinter #3dprinting #anycubic #bambulab #rc #rcairplanes #fpv #drone
Not quite there yet. As much as I love to see progress and innovation, this is in no way a "Bambu Labs killer." So many glaring issues just with the placement of ports alone.
Yep. Bambu definitely gave the industry a kick squarely and firmly in the arse and now they're all scrambling to catch up. This is great for consumers. The problem is that all these other companies are scrambling, so design flaws make it to the final product, the products end up rushed to market, firmware bugs, etc.
@@modestcody123 everyone keep seeming to miss the ??? After the bambu lab killer
Thanks to this machine, most of Bambu's lineup is cheaper. Competition is great for our pockets.
@@archemity agreed!!! Compétition is great
Everyone is jumping on the Bambu bandwagon. It is nice to also see alternatives.
@@mendelian8768 agreed!
From what I've read you can link 2 Ace Pro units together to get 8 color prints and they might expand it to link more later on.
@@cruisinsixothree3960 yes right now it is two units I have another ace unit on the way so I can try it
Left ear loved it
literally my first thought
@@harryvl3013 i dont know what the issues is i just tested it with both my headphones and i had sound coming out of both ears
@@fpvbuilds2023 probably because you have mono audio on/ your headphones are mono
I watch videos with only the right earcup, so I thought everything after the intro was silent.
❓Q: ❓in this printer, when it prints in multicolor, does it do 1 color at a time per layer? I was thinking of adding 1-2 color only on some layers and starting and ending with different colors to reduce pooping. ie. in minies having a green grass base, but not having any other greens.
@stravelakis it could it goes off of the stl and g code so of the stl has 1 color per layer line than that is what it will do, however just so you know that will take forever
@@fpvbuilds2023 so if the line is interrupted, ( I might put in 10 same minies on the same printjob), it will print each minie's layer's colors, and then go to the next making at least 10 color changes to print 1 layer with 2 colors?
@stravelakis being completely honest I have not tried what you are talking about however I guess it would all depend on the gcode, when I print multi color now it seems to do a bunch of the same color At a time and then switch to the next color.
Bambu is still better. But thanks!, I've been looking at these
Thank you for the review, I almost bought an older version of anycubic a couple times. The dryer function is cool, I am looking at designing a mod for my current AMS for that. I am interested in how multi color prints on cardboard spools work over time, bambu chokes on cardboard in the AMS. But wow what is with the Bambu hate club? I am coming from really old qidi and longer printers i bought a P1S combo. You could probably call me a fan boy now, but that is just because I can print stuff fast, and easy, I am not spending all my time upgrading just trying to get a decent print or get hair faster than molasses pours. Bambu is just FAST, really really good prints, problem free it just works, the remote app and other things are unbelievably handy. I have printed 10x the stuff with my p1s compared to the years with my others, its crazy better. I am currently printing a 6ft STARGATE that i would never consider on my other printers, because it would take probably 6 months or more to finish and not look as good.
the only thing going for the ACE is that it will be integrated into their other printers but far from a bambu killer. their software lacks.
I recommend changing the thumbnail of your video, I was looking for reviews of the Kobra 3 this week and it was difficult since your thumbnail does not show the printer as such
@@gadoneitor15 thanks for the heads up!
Not sure if you're aware but the video only has audio in the left side up to 11:53 and then again later from 20:55 to 25:40.
Hope the printer is reliable, it would really suck to lose a multi color print part-way.
@@Evo_Spec no not aware! Thanks for the info, much appreciated i will look into that
@@Evo_Spec good catch, i ill put out an update
I ordered one, I think Anycubic is on to something here. For the price it seems like a good value. I also have an X1C and an A1 so we will see how it stacks up. Thanks for the vid!
@@mr.k5835 thanks for watching !
Nice review. One small mistake though. At 23:10 $1,299 is the Combo price, meaning its the X1-Carbon + AMS
Is it true these anycubic multi colour printers create twice as much "poop" as a bambu?
I think its comparable
Was this a sponsored video? Curious to see more on the multicolor printing part which is the main reason to buy this printer.
@@OscarPerez_Oxkart no not a sponsored vid, i am currently working on more shooter vids of the multi color unit
@fpvbuilds2023 thanks for the reply, looking forward for the honest review
I almost preordered one of these. I really want to do multi-material printing, but I don't want more than one ecosystem. I already have Creality K1C and K1 Max.
@@777Thibs sell one of the creality machines and buy one of these, it is worth it.
Sell the K1C and get the K2 if you want to stay with the Creality ecosystem. They launched the K2 and have their own multi-material system. I have a Creality CR-30, a Sovol SV07+, and my Kobra 3 should be here today.
So, just to be clear. You don't have an A1 to compare with but 'bambu killer' clickbait.
And it gets even better. You don't even kbow the price and build size of the A1 to compare with
@@Moixo3d price and size of a-1 is in video, i did a comparison of the products via their websites and i have friends that have the a-1 and other bambu products as well as this is my 14th printer so i think i am qualifiéd to speak on it
Atleast he wasn't paid to show it like everyone else
@@Saltmancer thanks for watching !
Good overview, but some bias.
Some fact checking: You can print with bambu printers offline; it's called LAN mode. It only uses your local wifi, or you can just print with the SD card. Your security concerns are unfounded, and unnecessary fear mongering.
With the A1 you can buy individual nozzles, they don't seem to be available for the kobra 3.
You compared the kobra 3 to the X1c; not very fair to kobra 3. The X1c can print materials like nylon, ABS, ASA, polycarbonate, and has an active carbon filter for those materials.
There's obviously a bunch of software differences as well; I'm not sure how the kobra 3 handles it, but with the A1 AMS lite, you can have it move from one spool to the next if they're the same color and the first runs out of filament.
I like that the ACE can dry filament, but it's only really suitable for PLA or TPU; anything else requires higher than 55c; I print with a lot of PETG and that dries at 65c.
My own take on the kobra 3 combo is that their color unit is nicer than the bambu, but the printer is not nearly as well-tuned as the A1. It's good, just not great. Not even remotely close to a "bambu killer". Reliability, ease of use and user experience are all areas that bambu focused on that the other manufacturers are still playing catch-up on. I have two A1s and an A1 mini and have had zero issues with any of them, and zero tinkering or tuning; just adjusting slicer settings for the filament being used, changing nozzles for different materials like carbon fiber PETG and it's off to the races.
Like I said in another comment, I'm glad so many other companies are chasing bambu's success, that's better for all of us who use the printers, they just need to fine-tune all aspects of owning a 3d printer; making decent hardware is easy enough, but on its own it's not enough. I'm looking forward to the creality K2.
If you'll compare a bambu printer, the A1 would be a direct comparison.
@@NWGR thanks for the long well thought out comment, my security concerns are valid though, other creators have covered this and you can do your owm research on the information, if you dont hook up the bambu machine to the internet then it wont ever update. Again everyone is entitled to thier own opinions, the title is more about the price than anything when comparing machines.
@@fpvbuilds2023 Well I mean, even when directly comparing the kobra 3 combo to the a1 combo, the price difference is marginal; $40 right now, and when neither are on sale, that difference drops to only $10. Believe me, I've done plenty of research on all the privacy concerns because it was something I worried about as well, and by and large, they're unfounded and typical "they're watching" fear mongering. For the vast majority of users, none of that will have any effect on actual usage, even in print farm applications. And like I said, you can print without ever connecting online, and you connect just to update the fw and then go right back offline.
The whole privacy things is overblown, especially for something like a 3d printer, when there's all these data-leeching apps we use every single day, multiple times over. So again, the kobra 3 is a very competent competitor to the bambu A1, it's just a bit behind in some areas. They did nail the ACE though; that's a really nice setup and better than bambu's AMS lite.
I'm all for competition, but for me to switch or consider another brand, there needs to be a better reason than "they're not bambu".
Very bold statement "Bambu Killer" seeing you don't own a bambu labs printer.
@@Auzze statements have a period or exclamation point at the end of the sentence, my sentence has a questionmark ???
Good job!
Great vid !
Alright, so there are always security concerns with any device that's capable of connecting to the internet. I respect your opinion that you have those concern s about bambu, but those concerns should also be towards anycubic. The software for the Kobra 2 series had a severe exploit with unsecured api access points to control the printers, you've probably already heard about it. I'm not trying to say your opinions are invalid but just that you should have concerns about other devices and not buy them because of it. I apologize if I come off rude, have a great day.
@Alex-k5e8p thanks for your comment and opinion, I am aware of the anycubic issue, however the anycubic printers don't require an internet connection to set or use, even updated can be downloaded via micro sd or USB, I think bamboo has done an amazing job shaking up the market and alot of people love their machines, I am just trying to offer a different perspective.
3d printer companies always release their products before they are ready. It still has a long ways to go on the software side, which they will drop support by next year when they released another not ready to be released product. At least bwmbulab will support their printers for years to come. With their kobra 2 pro, they locked the firmware which made you use their app and slicer. I'm not going to go through that again.
@@oneanother1 thats not true, i have the kobra 2 and i dont use their slicer or firmware, i use prusia slicer and cura, the kobra 3 is the first time i have used thier firmware and its actuallu not that bad i will say it does still need some work though.
Bambu has now worries!
we cant be serious with left ear audio only....
@@d3adlyz3bra we appologize, it happened when it was uploaded, we cant fix it now without fully pulling down the video
Bambu killer??? Absolutely NOT. Got X1C's A1's (not the mini) and the Kobra 3,... The Kobra 3 is really NOT better...
nope
@@skynlab2478 nope as in not a bambu killer? Or just nope?
@@fpvbuilds2023 not a bambu killer , i have A1 , p1s both combo and return this one
Anycubic is rubbish and you have no idea of what you talking about Dji is a great company and run well. I have a few of the drones well put together and very well-made. As far as printers go, I’ve had two Anycubic printers and they both gave me problems constantly and the customer services crap. People should stop comparing this printer to the bamboo lab
@@williampetzer4540 unfortunately it is a comparable printer due to its speed and ace system, i never said dji didnt make good drones i just said i dont like them, i build and fly my own drones so i am able to speak on my issues with dji, also i have 8 anycubic printers running kn a print farm and i have not had any issues with any of them other than a nozzle swap.
Bambu killer 😂😂 what a joke
@@williampetzer4540 i am guessing you didnt notice the questions marks behind killer?
Clickbait
why?