Mindustry | Simple T5 factory Tetrative Reconstructor for making units like Toxopid or Omura

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ก.พ. 2021
  • So we are building from scratch a ground, air or navel factory and making T2,T3,T4 and T5 units. So we will be adding together an Additive Reconstructor, Multiplicative Reconstructor, Exponential Reconstructor and finally a Tetrative Reconstructor.
    This will make us be able to make Eclipse units, Toxopid units, Reign units, Omura units, Oct units and Corvus units.
    The design is all from the core.
    -----------------------------------------------------------------------------------
    If you want to help the channel please consider becoming a member
    You also get router emojis on youtube!
    -----------------------------------------------------------------------------------
    🔥Subscribe to this channel or your core blows up🔥
    -----------------------------------------------------------------------------------
    🛠️Schematic🛠️
    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
    -----------------------------------------------------------------------------------
    #mindustry #strategygame #towerdefence #basebuilding #sandbox #resourcemanagement #simulation #colonysim #citybuilder #physicsgame #economygame #iosgaming #androidgaming #gaming
  • เกม

ความคิดเห็น • 102

  • @SCHEMATIC
    @SCHEMATIC  3 ปีที่แล้ว +61

    If you want to help the channel please consider becoming a member
    You also get router emojis on youtube!

    • @fahrimertdincer8421
      @fahrimertdincer8421 3 ปีที่แล้ว +2

      Router emoji ???
      Or are you trying to say empty box emoji :D

    • @mrantler2310
      @mrantler2310 3 ปีที่แล้ว

      Don't have enough money :(

    • @zunex8296
      @zunex8296 3 ปีที่แล้ว

      Jojo

    • @witherschat
      @witherschat 3 ปีที่แล้ว

      The second emoji describes the first perfectly...

    • @ezucra
      @ezucra 3 ปีที่แล้ว

      it doesnt work on V6 how do i turn it on?

  • @just_started
    @just_started 3 ปีที่แล้ว +24

    Omg ty for making this, I was looking for an easy way to start my mass production, good video g!

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว +1

      thanks bro

    • @High_ping_play
      @High_ping_play 3 ปีที่แล้ว

      @@SCHEMATIC XD how to send this tell me please 😃

  • @hendri9524
    @hendri9524 3 ปีที่แล้ว +10

    Thank you so much i been struggling to come up with a schematic for a t4 and i could even make a t5

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว +4

      yeah I was the same when I first started making them, I think making something like this first really helps understand how to do it

  • @tratzum
    @tratzum 3 ปีที่แล้ว +7

    pretty neat. Maybe it needs a balancing but the cryo fluid requirement for T-5 is crazy. I am pretty sure even your setup would not be enough.
    I keep looking for what people do with the unit conveyors and you used them a bit here so good job again.

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว +2

      Yeah could do with more but it’s modular so just expand that part. But also it has an overdrive dome so it’s already at 250% anyway gonna be sucking all dat resources out

    • @onyxfinger7431
      @onyxfinger7431 3 ปีที่แล้ว

      His setup is enough for T5 but needs like 1-2 more for T4

    • @christophermerritte3176
      @christophermerritte3176 3 ปีที่แล้ว +1

      Ive actually made a stable and compact cryo system that consists of 24 cryo mixers that supports t5 creation. U can also use half of it for t4. If you have large mass of water,it can be way smaller by simply using mechanical pumps. I can post schem for it in the official mindustry discord under schematics if you want.

  • @josuaruks
    @josuaruks 2 ปีที่แล้ว

    Thank you very much! You helping me a lot😍👌🏽

  • @dukecatfishjunior6291
    @dukecatfishjunior6291 ปีที่แล้ว +2

    yeah, nice design, if you have a completely free 70X30 territory without any obstructions near your core AND have enough core inputs to get resources AND have enough power for this monstrocity... yeah, good!

  • @onyxfinger7431
    @onyxfinger7431 3 ปีที่แล้ว +15

    If you are good at spaghetti-ing your conveyors, you should NOT use vaults, because they're time consuming and pricy, and not use unloading from other unit factories because it's super inefficient
    And try not to use the one belt of each ressource for every factory because it will end up not having enough throughout

    • @kewlsanic
      @kewlsanic 3 ปีที่แล้ว

      Yeah this guy understands me a lot.

  • @hachidin8243
    @hachidin8243 3 ปีที่แล้ว

    Good video!!

  • @hthemaster1
    @hthemaster1 3 ปีที่แล้ว

    Amazing end

  • @AFMR0420
    @AFMR0420 ปีที่แล้ว

    This old ass video made me smile. Now cryo me a river.

  • @MonCalypso
    @MonCalypso 3 ปีที่แล้ว +2

    I can't help it, but i feel this is a flex on my broke new campaign

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว +1

      This was the first time I properly tried to make it. Before this I made insane complex stuff and was like noooo this has to be easier haha

    • @MonCalypso
      @MonCalypso 3 ปีที่แล้ว +2

      @@SCHEMATIC making schematics with not much knowledge in the game (basically me)have a hard time making schems ourselves. So we rely on others who do make efficient and compact schems so we can incorporate it to our campaign. If i post someone's schematic (example, you) i always try to credit the one who actually built it from scratch.

    • @subarutriggered3022
      @subarutriggered3022 3 ปีที่แล้ว +1

      @@MonCalypso some day you gonna make some cool schematics, all you need is time

  • @bananycus379
    @bananycus379 3 ปีที่แล้ว +12

    To people who don’t know- liquid tanks have nearly infinite throughput

    • @HifumiAjitani
      @HifumiAjitani 3 ปีที่แล้ว

      Dont forget about liquid junctions

    • @onyxfinger7431
      @onyxfinger7431 3 ปีที่แล้ว +1

      Overflows gates don't deserve to be used as routers since they're PROVEN by EXPERIMENT to be weaker than routers for sharing ressources and they're not made for it
      Liquids don't have throughout restrictions for now you absolute nerds 😉 would you think anuke would let both junctions and tables have better throughout even while anuke fixed that for sorters, routers, overflows et caetera ?
      Throughout is also not specified anywhere, and you can try it, but conduits don't have limitations, this is even more probable by the fact that it is marked in the trello that liquids need an upgrade and throughput limits
      Also you need 15 cryo fluid mixers for T5 reconstructed and like 5 of them for T4, but since T4 takes shorter to build I recommend you using only like 2 mixers for it, unless you are using payload routers to deliver the T4 on the ground when they can,where you will obviously need the full 5(yes it is possible to put T4 on a payload conveyor, tho T5 isn't possible).

    • @onyxfinger7431
      @onyxfinger7431 3 ปีที่แล้ว

      @@bananycus379 I think it wasn't but it is now idk I got a design putting T4s on conveyors and it works
      And the throughput limit is basically unreachable so no one really cares it's like infinite

    • @yoru120
      @yoru120 3 ปีที่แล้ว

      @@onyxfinger7431 it has restriction you just don't know it. Pulse and plated conduit both transport around 800 liquid/sec even with overdrive dome and spam liquid source, standard conduit is half of it, only around 400/s. However the liquid tanks can transport over 4000 liquid/sec, and liquid junctions is over 5k/sec but possible infinite and instantly no matter the length.
      Liquid router chain is shit bad, the more routers the slower the flow. Phase conduit and bridge conduit is around 500/sec. Proof? Do it yourself in sandbox

    • @christophermerritte3176
      @christophermerritte3176 3 ปีที่แล้ว

      @@onyxfinger7431 i have a compact 24 mixer design,im good :)

  • @richardtroms
    @richardtroms 2 ปีที่แล้ว +1

    so cool. i can upgrade my robots. no wonders i am having a hard time in my campaign. Thanx man!

  • @mikoajdziewulski2681
    @mikoajdziewulski2681 8 หลายเดือนก่อน

    Very nice video, though, i'm having a problem with t5, (mobile) when i manage to get it working, the T5 refuses to get out of the reconstructor, and it has a red sign with "!" on it

  • @sunRay04
    @sunRay04 2 ปีที่แล้ว

    that crypf;uid factory killed me

  • @maksimshabarov5684
    @maksimshabarov5684 2 ปีที่แล้ว

    Nice video, if everything was so easy. In the real game its hard to produce 5T units, when you have limited items and you always being attacked by enemy.

  • @johnnypixel5411
    @johnnypixel5411 3 ปีที่แล้ว

    nice

  • @vinzdetalo9816
    @vinzdetalo9816 6 หลายเดือนก่อน

    Siligon approved

  • @jerkydefendant7186
    @jerkydefendant7186 3 ปีที่แล้ว +1

    Find thanks bro i like this schematic

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว

      no worries bro, yeah i got fed up with complex designs for today haha

  • @shaneolean1396
    @shaneolean1396 2 ปีที่แล้ว

    I'm playing on Android app, I'm wondering if anyone can help me. I built all of the factories and stuff, and I successfully made a Tier 5 Air Eclipse. But after it finished being built, it just sits at the factory exit and won't attack. I have a command center. But when I press attack or rally it does nothing at all. Is there another way to control the Eclipse? It won't leave the factory.

    • @smdavis6604
      @smdavis6604 2 ปีที่แล้ว

      Is there anything in front of the reconstructor?

  • @nemanjabrankovic7379
    @nemanjabrankovic7379 ปีที่แล้ว

    what is the background song

  • @Ernesto_1762
    @Ernesto_1762 2 ปีที่แล้ว +1

    i need help i cant defeat the toxipid

  • @RafaelTNSG1245
    @RafaelTNSG1245 3 ปีที่แล้ว +2

    Here before it starts

  • @henrythemth3151
    @henrythemth3151 2 ปีที่แล้ว +1

    I built a even more compact one and only needs 2 vaults its also processor controlled meaning units gets materials from the core and put it in the vaults. Mine has 2 vaults 1 for the T1 - T3 recontructors and 1 for the T4 - T5 recontructors

  • @user-jy2zn3gz9h
    @user-jy2zn3gz9h หลายเดือนก่อน +1

    How to make a schematic look good: fill the empty space with battery

  • @realwetter_yt
    @realwetter_yt ปีที่แล้ว

    Yes bigfest core

  • @reina4969
    @reina4969 3 ปีที่แล้ว

    Those are unselected unloaders? I thought that was just sand. lol

  • @kernel_pult2161
    @kernel_pult2161 2 ปีที่แล้ว

    And membrane too

  • @deathnoteuser2010
    @deathnoteuser2010 29 วันที่ผ่านมา

    whats your favorite t5? me:corvux

  • @itsnotabanana2524
    @itsnotabanana2524 3 ปีที่แล้ว +3

    Is there a way I can uninstal the v6 update? I love the v5 better and my favorite mods are not working. If there is a way I can play v5 again please let me know. Thanks!

    • @decell7085
      @decell7085 3 ปีที่แล้ว +1

      U should download v5 and u probably cant find v5 but i have 32bit v5 i can send dat at discord for pc

    • @leonardonetagamer
      @leonardonetagamer 11 หลายเดือนก่อน

      Pretty sure github

  • @RafaelTNSG1245
    @RafaelTNSG1245 3 ปีที่แล้ว +2

    I suggest you use plast conveyor on the silicon part and instead of router use overflow/underflow gate

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว +3

      If you are using unloaders it’s faster with titanium belt

    • @ultra4254
      @ultra4254 3 ปีที่แล้ว

      @@SCHEMATIC Is the items on the t3 reconstructors just gonna go back to the vault? I dont understand the unloaders when its on between storage buildings

  • @zhara596
    @zhara596 2 ปีที่แล้ว

    Man they should add help button during game its freaking confusing when yoyr new

  • @kernel_pult2161
    @kernel_pult2161 2 ปีที่แล้ว

    Ik how to make a Toxopid the build cost: needs silicon, plantain,surge alloy, titanium and cryofluid

    • @leonardonetagamer
      @leonardonetagamer 11 หลายเดือนก่อน

      Ah yes plantains my favorite food

  • @decell7085
    @decell7085 3 ปีที่แล้ว

    Can u make a wireless t5?

    • @SCHEMATIC
      @SCHEMATIC  3 ปีที่แล้ว

      I’ve not tried one but isn’t there loads of people who have already made them?

    • @sharoncastillo2411
      @sharoncastillo2411 3 ปีที่แล้ว

      Yeah?

    • @sharoncastillo2411
      @sharoncastillo2411 3 ปีที่แล้ว

      i guess but its going to involve alot of units

  • @euanmorse
    @euanmorse ปีที่แล้ว +1

    Is this stuff relevant?

  • @JimmyChow42069
    @JimmyChow42069 3 ปีที่แล้ว

    Yes.gimme all thise schematics

  • @Fesko-ly1wr
    @Fesko-ly1wr 2 ปีที่แล้ว +1

    Hmmm, really good content for a newbies, but it's not good way to sucking out resources from a core in a pvp servers

  • @linuxgaming69
    @linuxgaming69 2 ปีที่แล้ว

    Cryofluid*

  • @simongiroux2371
    @simongiroux2371 3 ปีที่แล้ว +1

    I have one wireless

    • @christophermerritte3176
      @christophermerritte3176 3 ปีที่แล้ว

      I made wireless for all tiers too

    • @simongiroux2371
      @simongiroux2371 3 ปีที่แล้ว

      @@christophermerritte3176 whit the cryofluid?

    • @christophermerritte3176
      @christophermerritte3176 3 ปีที่แล้ว

      I have seperate schems for cryo supply which is actually better for resource bursting.

  • @ultimaterzgaming1269
    @ultimaterzgaming1269 3 ปีที่แล้ว +1

    me on sandbox : Haha yes 🅱️obux

  • @sugarasphalt2008
    @sugarasphalt2008 3 ปีที่แล้ว +3

    Uh

  • @ezucra
    @ezucra 3 ปีที่แล้ว

    It doesnt work on V6 HELP

  • @Carlos_mancia
    @Carlos_mancia 3 ปีที่แล้ว

    Tommy

  • @crious5322
    @crious5322 2 ปีที่แล้ว

    Its easier to make it without attaching to core

  • @zmaster1481
    @zmaster1481 3 ปีที่แล้ว

    I take it nobody won the glasses????

  • @kernel_pult2161
    @kernel_pult2161 2 ปีที่แล้ว

    Plastainium*

  • @Arbuzmokri
    @Arbuzmokri 3 ปีที่แล้ว +1

    Дэа

  • @Rogan.Insight
    @Rogan.Insight 3 ปีที่แล้ว

    If u made it more compact ot will be an awdome schem

  • @roxzreyes5165
    @roxzreyes5165 3 ปีที่แล้ว

    Use overdrive dome to speed up

  • @ihyaakmal5995
    @ihyaakmal5995 11 หลายเดือนก่อน

    CRYO NOT CYRO

  • @shuaiyan1295
    @shuaiyan1295 3 ปีที่แล้ว

    Just Use logic this is to big and useless but is good for someone

  • @roger_sarge5602
    @roger_sarge5602 3 ปีที่แล้ว

    Por fa pon subtitulo en español xd

  • @UncleKennybobs
    @UncleKennybobs 3 ปีที่แล้ว

    Nah

  • @hutojaba
    @hutojaba 2 ปีที่แล้ว

    But do you care?

  • @user-pr5jw3eu6g
    @user-pr5jw3eu6g 3 ปีที่แล้ว +1

    Waste

  • @Maric18
    @Maric18 3 ปีที่แล้ว +1

    cry o fluid
    not kyro
    CRY-O
    eksdee

  • @roceythecatbg2846
    @roceythecatbg2846 3 ปีที่แล้ว +1

    B r u h. Who in their right mind think this is simple?🤣🤣🤣