Once your used to the callouts, it's a must have. Wish spektrum would put the screen above the sticks on the next model. Looking at the screen during flight without call out , having the strap in the way gets old.
Hi Sean thanks for producing this video after you read my comment about call outs on the nx transmitter. It was very informative and easy to follow,I'll probably only use readouts about the temp of my esc and battery low voltage for now. But thank you again Sean and give your mom my best and I hope she is doing well. Looking forward to your next videos your friend Marty from Canada 🇨🇦 🛩 🛩
It's fine balance between getting enough info and too many call outs which get very annoying. I always like a count down call out every minute I'm flying so I can't run my lipo down too far. At certain times I'd like altitude call outs but not the entire flight but altitude call outs can not be turned off or on via a switch like the vario can. I did contact andy kunz of spektrum but he said altitude call outs controlled by a switch require major programming knowledge.
Thanks Sean. Great video as always. It would be great to make a video to show how to assign reading the status report to a switch. I tried the timed status reports but it is a bit annoying and distracting. So I guess the best way is to be assigned to a switch to read the status when required.
Excellent video. I will be trying to do this. 👍🏻🙂 SUPERB! This is exactly the “how to” information I have been wanting to see. Now I understand their terminology better. Thank you very much, Sean. Hope your mom is doing okay, and the weather will allow you to fly sooner than later! 👍🏻👍🏻👍🏻
Glad it was helpful!. mom is good. im taking this week off from her. i cant just swing by and visit for a few minutes. its always 2 hours of fixing her tablet or cleaning or just who kniows what
That so very helpful. I’m just getting into the hobby and your explanations are very informative. The manual is sparse and the setting possibilities endless. You helped me get started. I’m going to get my transmitter and plane configured to help me fly more safely.
Thank you for sharing your knowledge and time with us. I have set up data logging but it makes an annoying beep when I move the trottle stick that I would like to remove , and then the receiver (AR10360T) gives me incorrect altitude values. Do you know if there is something to set that I have not done? Hoping for an answer. Greetings from Italy.
G'day from the deep south - Western Australia! Would I love to win the jet? Absolutely! Thanks for the great content - just got a brand new NX8 and these tips are valuable! Keep up the great work. Cheers Bill A
Who names their plane "You Tube Demo" I name mine Betty or Betty 2. Now I'm at Betty 13. Great explanations Sean. Keep on Teaching us or at least this Dummy. I hope you, mom and the farm animals are all doing GREAT.
I have the IX12 with Spektrum telemetry RX, but when I go to Telemetry-Altitude screen. I dont see "status reports" for the callouts.Any ideas where to find that ? thx
Brilliant videos today mate👍🏻👍🏻👍🏻I could watch this stuff all day I have to say your blue stand seems a bit flimsy to me not sure it would last. I’m preferring your home made one. Might be my next task.
Hi Sean, I have a G2 Spektrum 6s smart battery. I get some battery info via the ESC. But zilch info under “smart battery”. Is this because it’s a G2 with no balance pigtail.?
A helpful video for people not familiar with the transmitter
After spending an hr searching found your videos, now I can learn to use this thing 👍👍👍
very good video sean very informative well done.this is the best video on how to use the telemetry on spectrum radio
Once your used to the callouts, it's a must have. Wish spektrum would put the screen above the sticks on the next model. Looking at the screen during flight without call out , having the strap in the way gets old.
man with the tech these days . im sure something like you want will come soon. maybe in our sun glasses we can see that info . lol
This was the easiest setup i've seen on the youtube. Now ineed to see all your videos. Thank you Sean, Happy New Year
Hi Sean thanks for producing this video after you read my comment about call outs on the nx transmitter. It was very informative and easy to follow,I'll probably only use readouts about the temp of my esc and battery low voltage for now. But thank you again Sean and give your mom my best and I hope she is doing well. Looking forward to your next videos your friend Marty from Canada 🇨🇦 🛩 🛩
no prob marty
It's fine balance between getting enough info and too many call outs which get very annoying. I always like a count down call out every minute I'm flying so I can't run my lipo down too far. At certain times I'd like altitude call outs but not the entire flight but altitude call outs can not be turned off or on via a switch like the vario can. I did contact andy kunz of spektrum but he said altitude call outs controlled by a switch require major programming knowledge.
yes im sure that is possible . but like he said that could take some time to figure out that mix
Another very useful video. Thank you
Thanks Sean. Great video as always. It would be great to make a video to show how to assign reading the status report to a switch. I tried the timed status reports but it is a bit annoying and distracting. So I guess the best way is to be assigned to a switch to read the status when required.
Great video useful information
Excellent video. I will be trying to do this. 👍🏻🙂 SUPERB! This is exactly the “how to” information I have been wanting to see. Now I understand their terminology better. Thank you very much, Sean. Hope your mom is doing okay, and the weather will allow you to fly sooner than later! 👍🏻👍🏻👍🏻
Glad it was helpful!. mom is good. im taking this week off from her. i cant just swing by and visit for a few minutes. its always 2 hours of fixing her tablet or cleaning or just who kniows what
@@GRIFFINRCPLANES totally understand, but you’ll never regret the time you have invested in helping her. 😇
That so very helpful. I’m just getting into the hobby and your explanations are very informative. The manual is sparse and the setting possibilities endless. You helped me get started. I’m going to get my transmitter and plane configured to help me fly more safely.
Great job. You made it simple
Thanks for the great lessons!
Thank you for sharing your knowledge and time with us. I have set up data logging but it makes an annoying beep when I move the trottle stick that I would like to remove , and then the receiver (AR10360T) gives me incorrect altitude values. Do you know if there is something to set that I have not done?
Hoping for an answer.
Greetings from Italy.
Excellent very helpful
Very good informative video!
For example, the telemetry “Max 60A” is just for alarm or status or is the smart ECS limit the amps to the motor?
Great information
Great video, Can you show how to set up to heart the % of throttle?
Excellent ! What is Vario ?
how can I get an NX8 to call out my battery voltage ONLY when below a given low set point?
Cool video Sean! Not sure I want all that talking to me but some would be very useful. Gotta dig into it more! Safe flying all!
yes i agree with you. during a coupkle of first flights with a different size battery or something that would be useful.
G'day from the deep south - Western Australia! Would I love to win the jet? Absolutely! Thanks for the great content - just got a brand new NX8 and these tips are valuable! Keep up the great work.
Cheers
Bill A
Merci pour vos conseils 👍
Fantastic video Thanks 🚁👍🏼🚁👍🏼🚁👍🏼🚁👍🏼
Thanks for another excellent video. I just bought an NX6 and setup one model but now I want rename the plane. How do you edit a plane name??
YOUR VIDEO IS OUT
@@GRIFFINRCPLANES what
Thank you for the nice videos
Who names their plane "You Tube Demo" I name mine Betty or Betty 2. Now I'm at Betty 13. Great explanations Sean. Keep on Teaching us or at least this Dummy. I hope you, mom and the farm animals are all doing GREAT.
that is awsome betty.....lol
Very helpful video 1 T up😊
Thanks for the video... Question for you.. How do you zero out the altitude while on the ground.? Mind doesn't seem to ever see "Oft"
Good question and video idea. I have never zeroed it out. I guess you just saw it at a good time
Hi, Is it possible to get the NX6 to call out the percentage of throttle? ie throttle 20%, throttle %50 etc. etc
I have the IX12 with Spektrum telemetry RX, but when I go to Telemetry-Altitude screen. I dont see "status reports" for the callouts.Any ideas where to find that ? thx
Thanx, your vid helped out a lot!!!.
I have the NX7e, there is no Voice option. Why? Do I have to update firmware or something like that?
Cool merci
Is it possible to set up the callout on a switch? I don't want it to keep calling out every minute, but only when i flick a switch.
Brilliant videos today mate👍🏻👍🏻👍🏻I could watch this stuff all day I have to say your blue stand seems a bit flimsy to me not sure it would last. I’m preferring your home made one. Might be my next task.
yes heavy planes dont work all that good on it
Hi Sean,
I have a G2 Spektrum 6s smart battery. I get some battery info via the ESC. But zilch info under “smart battery”. Is this because it’s a G2 with no balance pigtail.?
I think you may need a smart esc as well
Cool video and thank for the help 😀
Thanks for video! Subscribed.
I don't get the battery information on my screen. Any idea why? Smart battery display is Active
thats using the NX6 with a Smart ESC and a Smart battery