2022 BMW S1000R | 520 Chain and Sprocket Install
ฝัง
- เผยแพร่เมื่อ 9 ต.ค. 2021
- We walk you through step by step on how to install a 520 chain and sprocket kit on the new 2022 BMW S1000R
Get your kit here!
www.drivesystemsusa.com/bike-...
👍 Please SMASH that like button - this helps us out a TON! Thank you! 🙏
🛑 Don't forget to subscribe: th-cam.com/users/calimototv?sub_c...
🔔 Ring the bell for notification!
👉 Check out our equipment, gear, and other cool stuff in our videos: kit.co/CaliMotoTV
Cali Moto TV, the moto channel that has it all. As long as it’s got an engine and wheels, we’ll drive, we’ll ride it, we will tinker on it and we will be sure to share our experiences with you. Regardless if you’re a two or four-wheel fan, diesel, or gasoline enthusiast, we got you covered.
Hungry for more? Follow us on social media:
/ calimototv
/ calimototv - ยานยนต์และพาหนะ
![แฉ [2/4] 17 ก.ค. 67 “ลิลลี่ เหงียน” เปิดใจหลัง “เอิร์ก เลเดอเรอร์” ตอกกลับเรื่องโกงเงิน 50 ล้าน](http://i.ytimg.com/vi/s8KapfEO5NI/mqdefault.jpg)
Great vid Bill👍
👌 👌 👌
hey Bill thanks for posting so much. did the speedometer change at all with this or does the bike read off the rear wheel…?
Hey Bill good content and thanks for the step by step instructions. If you don't mind, could you please explain the advantage of one gear down on the front sprocket? What do you gain by this?
Why didn't this configuration work on the streetfighter V4S?
Hope to hear back from you soon.
Cheers!!
Alan.
Going down in front or up in the rear will give your motorcycle more acceleration while reducing top speed. Opposite does the opposite. The gearing change made the streetfighter too torquey and riding on the freeway was leaving the bike at like 8k rpm (bit too high).
Damn this is going to be wild
Indeed! 🙌
Thank you for the great video! Regarding the "finagling" to get the rear wheel back in, I remove the rear brake pads to make it easier. Yes, it takes 7 minutes to remove and replace brake pads, but wheel slides in much easier/faster (for me) and I don't have the frustration.
IMPORTANT NOTE: If you take the pads out, be sure to put the pin back in through the calipers and put the clip back in the pin, otherwise it is possible for the calipers to slide apart and the top clips will fall out.
Hey Bill, Happy Thanksgiving to you and Nikki!
Quick question, I recently purchased rear sprocket titanium nutz for my 2022 S1000rr ... Can I leave the rear wheel on the bike and swap out the older nutz one at a time? (Nutz torque 70nm) Good or bad idea?
Sorry,please give me for all Torque Specifications or can i fide them on web site? Thanks bro.
Thanks for the product link! Using that website identifies the appropriate chain as a 525 instead of the 520 and I wondered why you choose the 520?
More mph and faster acceleration and lighter
I did not get the down one gear issue please explain more
Changing the front chain mount would be major issue for the speed of bike start right
That locking ring on the front sprocket, I'm assuming it doesn't spin once you put It on. How did you line it up with the nut when you torqued the nut down to spec? I guess you just bend it where ever it lined up? I.e. no need to bend it where it was originally bent? Also, isn't the rear wheel nut supposed to be torqued to 125Nm?
I went one tooth down up front on my multistrada and hated it. Cost me a new chain to go back.... listened to everyone and on the forum that the bike should have come that way, couldn't stand it. Went back in under 1000 miles. Over $300 trial.. engineers have it right! Hope you like it....
We didn't like it on the streetfighter either. There's some bikes it works on, some it doesn't. We shall see.
The m chain is more wide than this one ? Or what is the difference between this 520 and the original one? 🙏🏽
Bmw manuals says that chain tension need to be on bike leg stand,what is your experience about that ?
I’d always slacken the front sprocket before I cut the chain just so can I use rear brake to hold it as it can be a strain on gearbox if done after the chain is cut
Yes good call!
Watched your last chuckwalla video with the new quick shifter and new 360 views very interesting, I saw the odd shift the street fighter did on you and wondered as an experiment to see if it’s actually the shifter miss behaving or maybe a slight error of your foot or a gearbox issue you could mount a camera specifically at your left foot and ride a few sessions and go over the footage just for your own curiosity it may highlight the issue once and for all ! I’m not saying it will solve anything but may rule out obvious things , I have had my foot on my shifter unknowingly whilst trying to short shift and had bike kill as my foot hadn’t fully lifted of the shift pedal and I know u stated before you have a large foot it’s just a thought but overall live your videos at least you show warts and all not just say every single thing and product is awesome like some will to not offend the vendors etc which in my eyes is a total sell out , keep up the good work buddy it’s very much appreciated 👍
Fresh chain , sprockets and rear hoop ....
Looks like you enjoy some track/circuit action?
If you do... please show / give us some feedback on your new setup?!
Plenty of track content on the channel discussing the bike. Check it out
Do you use loctite on the front sprocket nut?
Nice 👍🏽
🙏🙏🙏
You should have put a longer chain. 2 links longer. It would be easier to keep the front end down.
Any problems with the super lite sprocket? I just ordered one. But then seen a lot of post and them cracking
Nope, all good.
Hi Bill
Can you send me a copy of the cheat sheet (torque spec)
Just curiosity in me is asking of any reasoning why you prefer Michelin tires over Pirelli?
Comes down to personal preference tbh.
Get yourself a tire wedge for that pitbull stand. You’ll have a much easier time lining up your axle
We have one now. Plot twist V2 you can't remove the front wheel because of the front fendor 😂🤣
What happened to the SCproject exhaust? I see you have the stock can back on.
Sore subject with the owner/director 😅😅
Yea don't care to represent that brand. Would rather run the stock can.
Any plans for some light weight wheels bill ??
Possibly. We're liking the bike more and more so stay tuned.
@@CaliMotoTV just picked one up from the dealers here in the uk, taking it over to the Isle of Man on Monday for the week to run it in 👊✊️✊️ mine has the m sport wheels 👍🏻
Can you link that torque spec cheat sheet?
Email us at calimototv@gmail.com
Go for the 16 tooth unit! if it doesn't feel right then you can chuck the OEM one on! cant say you haven't tried it then bud
Watch the whole video 😝
@@CaliMotoTV currently still running haha 😄 just seen that you did fit it 👏
Get yourself a Pitbull tire wedge. Might cut down the time putting the rear wheel back on.
No guard on the saw?? Make sure rpm on cutting wheel exceeds rpm on your tool! Be safe!
I like to live on the edge! Hahahah
does the 16 throw out the speedo much?
Not 100% yet... well see tomorrow
What tyres are those dawg
Michelin power gp
@@CaliMotoTV do they last for street ? Or should I get the power 5?
Amateur. Always losen front sprocket nut 1st with chain on. Edited out the 10 attempts he had trying to loosen the nut. Loosen rear sprocket nuts while rear wheel is still on bike.
I don't think you using safety first for your audience, very dangerous procedure teach the proper way.
🤔
I think you're safe bill.
"I can't urge you enough to be super super careful when cutting" he says, using a cutting disc on a mini grinder with no guard fitted and no side handle. 😬