Hey, thanks for your videos! Can you please record one of these videos on the Netgear Nighthawk series routers, and include the software settings? Thanks!!!
Hi, I liked your video and your knowledge to make the setup process very simple. I have two questions… 1) What is the difference between a Repeater and an access point? 2) Out of the two, which one is better? I have CAT-6 cable laid from the main ISP router to each room.
I watched your old video and followed you here. I am still confused about changing IP Address of Cisco-E2000 Router (being added). I am using Linksys Router with no WiFi. 1- Connect Ethernet to WAN of Cisco-E1200. But NOT POWERED UP? 2- Then from LAN-4 of Cisco-E1200 to LAN-1 of added Cisco-E2000 Router. Power this Old Router to reset. What about Cisco-E1200? 3- Use Phone or Laptop to access router system using WiFi? Which one, the Main or the Old? 4- Why not use LAN to access Cisco-E2000 router? Can I do it without signal or link from Cisco-E1200? 5- You jack LAN from Cisco-E2000 router to Laptop LAN but at 4:00 you start accessing system config through Wifi. Why?
anong clear ka jan wala nga siyang gnawa kundi sinaksak e hndi gumana ung wireless na gnawa nya kaya sinaksak na lang sa isang router para hndi lang mapahiya sa video
short answer: some wifi router can yes. Like you see in the video, the router asks him if he wish to have it wireless. Make sure yours have that option, or get one that can, if you need without cable.
@@savagegtalks5912 how did he manage to use internet and connect to the tp link website by entering the tp link device ip address when there is no optical fiber or internet wire connected to the tp link device when he was resetting the device and did the whole procedure?
Using this method slows the internet speed a lot like it’s not even working when connected to either router Please help It starts working normally only after I disconnect the Ethernet and connect to the og router
I have a Huawei B535 I want to configure as an access point. I switch off the DHCP and assign one of the IP from the main router's address pool but it's not working. The other router i have, ZTE, works without issues as an AP. Not sure what is causing it.
My guy pliz do a video on phone Gps/gyroscope/accelerometer,also something on starlink actuated kit and the rest. do keep me waiting pliz. my phone is realme c33 128 gb i can see the gps also but the gyroscope no.Thanks again for the rooters kudos.
My friends your method is working, im using it to my ps5 with lan wire but sometimes the connection lost and im dont know why do i have to unable my firewall in the main modem
Hi friend thanks for the informative video. After connecting the TP link with the main router can you place the TP link anywhere in your house without the yellow cable?
Make a video on how to change Nat type especially for gaming... I have a Huawei router but don't know how too. Even placing ip adress in dmz, my console still says type 3
I used to have this issue all the time when i had a roommate. I would have to reset the router almost every day and make sure i was the first to log into my PlayStation to make sure i got the type 2 (open) nat type.
I have a wireless n repeater can anyone let me know why it's not showing in my list of networks and when I enter ip address in web browser it not doing anything?
Im using Huawei router. And when i turned off DHCP server. My phone wouldn't connect to the Wired Router extender.. why is that? But when DHCP is enable. Its fine
After I disable the DHCP on my old router, I can't connect to it anymore "Obtaining ip address" . Even after connecting it to my main router it is still "Obtaining ip address"
Hello, asking quietion, i have netgear nighthawk model C7000v2. Can i connect or repaet wifi from tmobile home internet 5g ? Because netgear nighthawk no line wan, have 4 line all is ethernet, 1 is coax. Thank you.
Good explanation, pare. Stay dry if your in the Philippines👊🏼
thanks, saved me money and better coverage
Thank you for the detailed explanation, I would only want to know, why can't we connect it to the WAN port in the older ones?
Hey, thanks for your videos! Can you please record one of these videos on the Netgear Nighthawk series routers, and include the software settings? Thanks!!!
Thanks you very much🎉
Hi, I liked your video and your knowledge to make the setup process very simple. I have two questions… 1) What is the difference between a Repeater and an access point? 2) Out of the two, which one is better? I have CAT-6 cable laid from the main ISP router to each room.
Incredible video
Bro good evening. I have tp link ax 53. I config as access point. Wired repeater is the same with wired repeater set up?
Nice one bro👍😀
Ty bro
I watched your old video and followed you here.
I am still confused about changing IP Address of Cisco-E2000 Router (being added). I am using Linksys Router with no WiFi.
1- Connect Ethernet to WAN of Cisco-E1200. But NOT POWERED UP?
2- Then from LAN-4 of Cisco-E1200 to LAN-1 of added Cisco-E2000 Router. Power this Old Router to reset. What about Cisco-E1200?
3- Use Phone or Laptop to access router system using WiFi? Which one, the Main or the Old?
4- Why not use LAN to access Cisco-E2000 router? Can I do it without signal or link from Cisco-E1200?
5- You jack LAN from Cisco-E2000 router to Laptop LAN but at 4:00 you start accessing system config through Wifi. Why?
This is the best simple explanation i came across on you tube 👍
clear and simple love love love
anong clear ka jan wala nga siyang gnawa kundi sinaksak e hndi gumana ung wireless na gnawa nya kaya sinaksak na lang sa isang router para hndi lang mapahiya sa video
Is it possible to connect to the main router even without utp cable by using wifi?
Is Ethernet cable is necessary between old router & modem....can we place the old router far away without connecting cable and connect internet ?
short answer: some wifi router can yes.
Like you see in the video, the router asks him if he wish to have it wireless. Make sure yours have that option, or get one that can, if you need without cable.
@@savagegtalks5912 how did he manage to use internet and connect to the tp link website by entering the tp link device ip address when there is no optical fiber or internet wire connected to the tp link device when he was resetting the device and did the whole procedure?
You should have not used "ANY" in your desciption. Click bait title
I second that.
Using this method slows the internet speed a lot like it’s not even working when connected to either router
Please help
It starts working normally only after I disconnect the Ethernet and connect to the og router
After I disabled DHCP server and save it is showing address is invalid
can i increase my upload speed with this
how can i limit the speed of each wifi router? I am planning to extend my wifi in our outdoor bar.
How about a router from pldt, globe or smart...you cannot find details at the back. Can you make a video on how to reused it as extended router
How you have connected to router by opening website but Ur don't have internet how at 5.29
I have a Huawei B535 I want to configure as an access point. I switch off the DHCP and assign one of the IP from the main router's address pool but it's not working. The other router i have, ZTE, works without issues as an AP. Not sure what is causing it.
so is it on the second router you plugged the ethernet on the WAN instead on LAN like the first one ? what was the restriction.. you never explained
What if you just connect to WAN and it'll create a wifi. I mean why go thru such hassle of making it a repeater
klaseng tutorial yan hirap na hirap ka dn e haha repeater cinonnect mo naman sa isang router baka turuan pa kita
Tplink acts as repeater but for very short duration, how to set for long and even after power restart it has to work automatically
how would i know if my linksys router has the feature to be a wireless repeater? I did search but was not able to get answer.
This is what i would like to know as well. What's the point of it being wired when you can just run it to the main then?
@@bradblackmore2627 you extend the signal strength
What about a router and a portable mifi(wirelessly)
If a Wifi router only have one RJ45 socket (LAN/WAN) , can't we use it as AP?
When I try to open the router ip web page, it doesn't load.
Ok so now the issue I'm having is the ip on both routers is the same.
My guy pliz do a video on phone Gps/gyroscope/accelerometer,also something on starlink actuated kit and the rest. do keep me waiting pliz. my phone is realme c33 128 gb i can see the gps also but the gyroscope no.Thanks again for the rooters kudos.
My friends your method is working, im using it to my ps5 with lan wire but sometimes the connection lost and im dont know why do i have to unable my firewall in the main modem
Hi friend thanks for the informative video. After connecting the TP link with the main router can you place the TP link anywhere in your house without the yellow cable?
Nope bruh. It needs to wired. Unless ur tp link supports repeater mode then you can do it with cable.
@@torogipro thank you for your response
Make a video on how to change Nat type especially for gaming... I have a Huawei router but don't know how too. Even placing ip adress in dmz, my console still says type 3
I used to have this issue all the time when i had a roommate. I would have to reset the router almost every day and make sure i was the first to log into my PlayStation to make sure i got the type 2 (open) nat type.
I have a wireless n repeater can anyone let me know why it's not showing in my list of networks and when I enter ip address in web browser it not doing anything?
Sir Guaki. Do you have flipper zero. Give me one.
Bruh, I dont use flipper zero😆
Im using Huawei router. And when i turned off DHCP server. My phone wouldn't connect to the Wired Router extender.. why is that? But when DHCP is enable. Its fine
Good PM, can i connect starlink mess directly to PLDT Home fibre?
thk you
After I disable the DHCP on my old router, I can't connect to it anymore "Obtaining ip address" . Even after connecting it to my main router it is still "Obtaining ip address"
Thats the last settin you need to do. Once you disabled dhcp then you connect it to the main router that will send out IP address
How to return the wifi router to its original state
@@MiniSamuel-gg3bb do a full factory reset bruh
same problem
Can we connect it through wireless
the link speed of my router is 50 mbps on 2.4 Ghz I think it won't be able to repeat a 5G signal
First you connected lan to lan. But in second you connected lan to wan. Why. can you pls tell
Exactly, I didn't understand either
Hello, asking quietion, i have netgear nighthawk model C7000v2. Can i connect or repaet wifi from tmobile home internet 5g ? Because netgear nighthawk no line wan, have 4 line all is ethernet, 1 is coax. Thank you.
can i join ur clan coc.. nice explain verywell
paano mo nasabing wireless repeater gnawa mo e naka wired ka nga parang sinaksak mo lang na walang nangyari boss haha
pa speed test ka pang nalalaman naka wired ka naman
This would have been much better if you had used a PC instead of a phone. Alos, when teaching, go SLooooow.
magtagalg kana lang kaya hirap na hirap ka na e
Is that a nokia
Useless :-)