Świetna robota jak zawsze! Cieszę się, że udało Ci się naprawić problem z dźwiękiem, bo od pewnego czasu na Twoich filmach słyszałem wszystko tylko w jednej słuchawce. Pozdrawiam!
How the hell are you holding .001...or less...on the tailstock end of a part hanging out of the chuck for a mile? Gotta have at least that much in runout.....
Nice job Chris. Do you program in Metric or Imperial and does the lathe have a Metric or Imperial lead screw? Just the sort of stuff I think about when watching You Tube ?
You can set up your machine both ways, metric or imperial. Since US loves inches so much, all of the machines are running inches, and we only have imperial measuring tools. The lead screw on this lathe actually is metric.
Can something be lathed and then brought to the mill and vise versa? Or can something only be done on one machine? I want to get something lathed that has an asymmetric hook protruding out..
A lot of sweating getting those spaghetti noodles cut to size. Thanks for sharing. Charles
Your an absolute master at keeping the shaft from chatter and bowing like a banana!!
A lot of steel wool being thrown away. Long skinny parts make me nervous
Really nice job and very difficult when most of the tolerances are working grade 6. (m6)
Blue chip special!.
Great job Chris,
Świetna robota jak zawsze! Cieszę się, że udało Ci się naprawić problem z dźwiękiem, bo od pewnego czasu na Twoich filmach słyszałem wszystko tylko w jednej słuchawce. Pozdrawiam!
Good work👍👍
Lots of ways for an overconfident apprentice to screw that up.
How the hell are you holding .001...or less...on the tailstock end of a part hanging out of the chuck for a mile? Gotta have at least that much in runout.....
What was done with the workpiece before starting finishing? Usually shafts of this length bend after roughing.
Hey Chris how your long parts never chatter, does is just depend on how good condition the lathe is, mine chatters like crazy if i try do that size
0:17 - a mówiłem, gonić nieuków i bić linijką po łapach! 3.9384", my foot... : )
Nice job Chris. Do you program in Metric or Imperial and does the lathe have a Metric or Imperial lead screw?
Just the sort of stuff I think about when watching You Tube ?
You can set up your machine both ways, metric or imperial. Since US loves inches so much, all of the machines are running inches, and we only have imperial measuring tools. The lead screw on this lathe actually is metric.
@@ChrisMaj So do you do all the imperial conversions and notations to the drawings at the machine?
图纸是公制的，他提前将尺寸，R角，公差进行了分类，并将图纸的设计公差和编程尺寸进行了标注和转换
How are you liking those seco inserts Chris?
They work pretty damn good 😅
Hello. How do you remove the taper of the shaft? programmatically or using the tailstock??? thank you..
Hello. Won't the diameter be tapered? That's sometimes the problem for me
在数控车或加工中心加工长轴或直线较长的边时，如果出现大小头的锥度可以预先留有余量，试切测量，看一下到底哪头大哪头小，差多少在改变程序，人为的将其进行更正。普通车床加工，道理类似，只不过需要操作者将中拖板的吃刀量凭感觉或者打表找正进行修改。这就需要很高的操作技巧了。
Why do you use the steady rest so closely to the chuck? And not closer to the location you are working on?
Probably down to harmonics, ..............long bars do ''funny things''
Can something be lathed and then brought to the mill and vise versa? Or can something only be done on one machine? I want to get something lathed that has an asymmetric hook protruding out..
For example, a lathed shaft, with milled grooves like a PTO spline shaft
Question normal u use a cermet insert to finish your part why u use a dmng this time?
material chattering
isn't it? how did you do it
Is the cardboard to keep chips from getting in the steady rollers?
Yes sir
How much allowance did you leave for grinding?
All finished on the lathe.
@@ChrisMaj
So you have an incredibly accurate machine.
看视频，并结合刀具的吃刀量进行分析，单边应该在0.4mm左右，再者，产品尺寸公差普遍在0.2mm或更大，完全可以车出来。若是公差只有0.02mm，那只能进行磨削