Your coolant flow was probably most to blame for that broken cutter. Need Thru Spindle Coolant. But that save though with the Wire machine. Is an excellent touch. That may as well be the original strategy for next time. Drill out any size hole so it exists, and then use the Wire to bring it to size. As for another idea. If that Wire machine was large enough. Is it feasible to cut that excess stock off, and bring it to a rough 'L' shape first? Instead of that side Op on the table? How long would that take?
Really nice finished surfaces on all your work, great set ups for different operations, it shows that you really care about your job and trade. Hope your making top pay wherever you are.
Really great work! congratulations!!! Can I ask you for the code of the pramet insert. I can't read it from the box you photographed at 2:13 Thank you very much!
Really enjoy seeing others finished work. Not just another tool maker but another country too. Can I ask, is that a BT50 spindle? And whats the working scope of that machine? Love those vices too 👍🏻
In the beginning, its shown that the workpiece comes from a giant block which you cut the workpiece from. I wonder, couldn't the cut have been done in a waterjet cutter to save a lot of time and bunch of material and tool wear...?
Super práce. Na to je radost se dívat, tím spíš že tam bylo i vyjiskření. Prostě normální den v životě frézaře. 😁 Jen dotaz, kolik hodin/minut frézování na tom teda nakonec bylo? Všechny polohy dohromady.
Hi guys. If you watch the video carefully you will also find cnc fail . Still, I hope you enjoy the video.👍😁
And please keep those errors in the videos. Shit happens and every machinist knows about it :D Good looking part in the end!
@@innominatum9906 thanx😁
Your coolant flow was probably most to blame for that broken cutter. Need Thru Spindle Coolant. But that save though with the Wire machine. Is an excellent touch. That may as well be the original strategy for next time. Drill out any size hole so it exists, and then use the Wire to bring it to size. As for another idea. If that Wire machine was large enough. Is it feasible to cut that excess stock off, and bring it to a rough 'L' shape first? Instead of that side Op on the table? How long would that take?
This is the most complete cnc Chanel on youtube
Without a doubt the most impressive //real// mould making on youtube. Absolutely fantasic
Thanks
@@CncFrezar kennametal tools don't break. try them next time👍
@@importantdolphin8974 I gave what I had😁
mengingatkan saya dulu pernah menjadi seorang operator mesin cnc milling dan sekaligus programer... good job brother 👍
great job man.... congratulations for your experience and knowledge in milling special parts.. here in brazil i make small size mold parts
That broken cutter wasnt part of the original quote...thanks for sharing. Charles
awesome cnc milling. It's amazing to see how the mold component is made.
Despite the trouble you finished the job! Nice pice of art)
very good job..thanks for your time CncFrezar
Thanks
Really nice finished surfaces on all your work, great set ups for different operations, it shows that you really care about your job and trade. Hope your making top pay wherever you are.
Nádherná práce :) proti tomu je CNC soustruh prd :)
Vďaka
good job
why not use EDM Cut?
Good luck 🤝
Very nice work as per usual
Very interesting part !! :)
Nice
Really great work! congratulations!!! Can I ask you for the code of the pramet insert. I can't read it from the box you photographed at 2:13
Thank you very much!
nice Video!!
New subscriber
Great works!
Thanks
Супер!!! Спасибо, очень полезно!!!
항상 잘보고 있습니다. 굿~
WOW! WOW
Krasna prace chlapi, jak vyrovnavate kus v druhe operaci, nebo mate sondu s detekci natoceni obtobku?
Vďaka. Vyrovnávame kladivom samozrejme hliníkovým 😀
@@CncFrezar to musi bejt pecka, doklepavat ctvrttunovej kus 🤣
@@c14rk29 už so vyrovnával aj 4tony 😀
Really enjoy seeing others finished work. Not just another tool maker but another country too.
Can I ask, is that a BT50 spindle? And whats the working scope of that machine?
Love those vices too 👍🏻
Hi. The spindle is SK 50. The feed range is X-2200mm Y -1500mm Z1000mm
@@CncFrezar wow thanks. Thats really put some perspective on your work.
Great! Are all cutter feeds recommended in the catalog? It ’s really high speed！👍️
yes
How long does the total cutting time take?
Hello,
Thanks for the video,
At 3:27, what was the thickness :) (I guess it was 0,1-0,2)
Have a nice day.
Thanks .You're right about 0.2mm
chlapi máte to hustý
👍🙃
Why using wire edm? to straightenig the long lengths of the deep holes?
to make the holes straight and accurate.
Great job bro. How did you put it in the correct coordination? Can you give me an advice please
We had a precisely milled block. All other operations were based on him
WONDERFUL
New subscriber +👍
HEATING CHUCK CALCULATION?
In the beginning, its shown that the workpiece comes from a giant block which you cut the workpiece from. I wonder, couldn't the cut have been done in a waterjet cutter to save a lot of time and bunch of material and tool wear...?
I don't know how much it would cost. I'm just a worker.
Super práce. Na to je radost se dívat, tím spíš že tam bylo i vyjiskření. Prostě normální den v životě frézaře. 😁 Jen dotaz, kolik hodin/minut frézování na tom teda nakonec bylo? Všechny polohy dohromady.
Ďakujem. Nemôžem však zverejňovať časy ani bližšie info o súčiastke.🤭
awesome video!! how did you machine the side pocket?
Thanx. It was made on a CNC horizontal boring machine.
Solid Carbide Ball Nose End Mill
2379 Steel
Finish Vc fz ap ae
Please?
Nice work! !👍👍🏻👍🏼👍🏽👍🏾👍🏿
How many cycle time for this case?
Thanks. I can't answer that
@@CncFrezar thanks . I get it!!
It’s Trade secrets right😅😅😅😅
@@liaokunming5718 yes
Bu isi yapmak kac gün sürdü
Epic
Try to use insert type ball mill !! To avoid cutter broken
perfect ım turkish
Are yu using master cam??
Cimatron 15
@@CncFrezar y don't yu use Nx!!
@@vishnudeepu3667 not
1980 we would have done it like that.
so u guys just dont have a bandsaw or anything
or even use that waterjet
We do not have. We needed to do it as quickly as possible. so we didn't even use an external company.
Internacl cooling still does't work 🤭
He wouldn't help me
please don't add music please
Just stop with the shitty EDM music intros guys...otherwise the video was fantastic
Sir your wasting a lot of time by this type programming and plaining
Nice
New subscriber