My elderly mum just had some bloke replace some door handles today. On closer inspection a lot of the screws he put in have the screw head absolutely stripped/destroyed. It looks like he actually drilled out the screw heads! That's not good is it? Seems like a right bodge job to me. Any replies would be appreciated cos I hate seeing my mum ripped off.
There’s a ton of ways to remove stripped screws. Sometimes you can get them out with a rubber band, other times you need a bit more brute force like in this video. You can also buy reverse thread spiral bits to get them out, but the good ones cost a fair bit. I’d try the rubber band method first, failing that, I’d try this method. Then replace with new screws, and either drive them by hand, or make sure your clutch on your drill is set to a low setting to prevent stripping 👍
@@tipcentricyes it is, we tried every method on an itty bitty stripped Torx screw yours is the one that worked. Was recessed in polished metal couldn't slot the top, which was too shallow to begin with, and we didn't want to damage the surrounding area.
Don't think my Aldi bits could withstand that hammering 😅
Can aldi bits even survive a drill?? 😂😂
@@tipcentric I never strip my screws - my screws strip my bits
@@BlackoutCreatively 😂😂😂👍
@@BlackoutCreativelylmao same
Parkside 😂
This actually worked when a stripped screw removal tool didn’t even work, thank you!!!!
You’re welcome! I have tried them removal tools a few times. They do work, but not as well as this method can 👍👍
What size drill bit do you use for that t15?
@@kyleharrison4878 yeah that’s right.
Is it the jn reverse strip it? @@tipcentric
@@TotalWarriorLegendsno, just a Torx bit 👍
OMG! I used masking tape as additional grip and it worked like a charm. Thank you!!
LEGEND. I spent 2 hours trying all different methods. This one worked like a charm
Love comments like this! Glad it helped out! :)
This is the best method. Even for hard to reach places
Now do one for a stripped drill bit haha
😂
Brilliant, thanks.
Tried it and it worked for me. Thanks for sharing it!
Speed out tool didn’t work. Was getting ready to cut the screw.. tried this and it worked.. wow!
I have a lawn mower shaft with a stripped grub screw. I'll try this when I get the chance! Gotta get the broken ez-out out first
This worked amazingly thank you!!!
You're welcome!
Tried it and it definitely worked. Saved me so much time. Thank you!🙏🏽
You dont need to use the drill bit just use a different size screw bit
Worked for me! New skill unlocked. Thanks man.
Cheers that actually worked on my cylinder lock screw.
Most welcome, glad it helped :)
3mm drill bit and a t15 worked well for me. Thanks
Very welcome 🥳👍
It worked!!!! Thank you sir!
Most welcome! :)
You're my hero!
What size drill bit for the T-15. Also is he going forward or backwards.
I've actually saved myself a lot of frustration at work with a sharp 3/16 and 3/32 bit and a throwaway star bit
Thanks! Did this and it worked!
As a person who tried to install ssd card on my ps5 and got screw stripped i call tell if i do that my ps5 will die.
We must make sacrifices to make his screws life living gell
Excellent DIY hack ....it worked . Thanks !
You're welcome!
What size drill bit?
Worked for me and 6 stripped out Phillips ! Thanks
Very welcome :)
Nice, good idea
Before doing that, put a small piece of duct tape on the screw and use a manual screwdriver. It turns it right out.
That does not always work.
@@ELScorcho0110yup I already tried that didn’t work screw was too rounded and is still stuck 😂
HI, What size drill bit do you use for that t15?
My dad used this trick to get a stripped screw out from my e scooter, worked perfectly
Awesome! 👍👍
What’s the drill b it size?
What size drill bit for torx 15?
tnxxx it worked for me!!!
Для такой операции нужна бита очень хорошего качества. Как резец по металлу.
This just saved me 😮💨
Happy to help! 👍😀
Worked, you saved my scooter
Just the proper tool
Like what?
Wish I seen this about half an hour ago. Just been fucked on a screw for past 20 minutes
What sizes to use though, surely every situation different
Thank you perro
If this works ur saving me money my friend
Im thinking about using this method on an expensive set of balisongs with T-10 screws.
Been doing this for years
It worked!!!
Did you try it? Awesome! 😀👍👍
Unfortunately, this didn’t work for me. Still can’t get the screw out.
Or put a rubber band in it then reverse your drill whilst the end is in the band does the same thing
Did that one in another video. It’s a bit hit and miss, depends how much grab it can get in the screw head and how tight the screw is. 👍👍
Yeah no not always😢
Don't think I can do this on my controller.
Podrías usar un extractor de tornillos
How about at glass door?
Muy buena
I am not doing this to my Steam Deck lol
Insert Screw on the Loose
🐐!!!!!!
I got a Allen bolt that’s stripped in my ar🤦🏽♂️
What size drill bit is that drilling
In screw
2.5mm I think.
why no manufacturer comes with T16 T 21 T26 etc , now the tolerance is useless because the screws use maximum tolerance too
Даже ногти пострич некогда, весь в делах бедненький
What's the rotation of the drill? clockwise or counter clockwise?
You would want to go the opposite of the screws threads so in most cases, you would go counter clockwise.
@@user-wi3qz6fx6yclockwise while drilling. Counter clockwise when removing. Remember the old saying. "Lefty loosy
.. righty tighty
Electronics: rip
👍👍👍
👍👍👍
Are you reverse drilling or in forward mode?
forward drill, reverse screw
In the start you used the wrong bit
But what is the name of the removal tool
It’s a torx bit. T25 I think
What kind of goofy ish is this?? The thumbnail clearly shows T15. You don't know what's on your own video bro?
@@resandor you’re correct it was a 15. My bad.
@@resandorcalm down mate, he only made a mistake lol being goofy is calling him up on it
@@MuncheeZRetro I helped to make him better for future videos. Get over it
My elderly mum just had some bloke replace some door handles today. On closer inspection a lot of the screws he put in have the screw head absolutely stripped/destroyed. It looks like he actually drilled out the screw heads! That's not good is it? Seems like a right bodge job to me. Any replies would be appreciated cos I hate seeing my mum ripped off.
There’s a ton of ways to remove stripped screws. Sometimes you can get them out with a rubber band, other times you need a bit more brute force like in this video. You can also buy reverse thread spiral bits to get them out, but the good ones cost a fair bit. I’d try the rubber band method first, failing that, I’d try this method. Then replace with new screws, and either drive them by hand, or make sure your clutch on your drill is set to a low setting to prevent stripping 👍
try what? what are any of these things????
Yeah you didn’t reverse that footage at all. 😂😂😂😂🎉😢🎉🎉🎉🎉🎉
Highly recommend
Use a rubberband on top of the screw to help get it out.
That can work too 👍
каленый саморез сверлом?чо курил?
👍
Где ты там калёный саморез увидел?
Обычный ШУЦ.
he just ruined the driver bit to get one screw out... What a terrible idea...
NOPE, he ruined the bit to save loads of time.
винт ? где ВИНТ ?!?!?!?!?!?
In the wood
Didn't work
こんなのエキストラクター使えばいいんだし。
こんな事ばっかりやっているのかな?トルクスの角が傷んでる。
È molto utile!
👍👍👍
И что из этого ты придумал?
Этому способу уже десятки лет
It’s a good tip
@@tipcentricyes it is, we tried every method on an itty bitty stripped Torx screw yours is the one that worked. Was recessed in polished metal couldn't slot the top, which was too shallow to begin with, and we didn't want to damage the surrounding area.
@@cherigriffith724 happy to help :😀👍😀
How can I do this to my electric scooter 🥲send help