Changed my leaking valve cover to a new one, and still sometimes smell comes back and smoke from under the hood, the new cover seems normal and dry, could it be old oil on the exhaust burning off?
How did you get the injectors to come out so easily? Any advice? I’ve seen people use a slide hammer, but I have the same injectors on my n47 e84 like in this video that have the fuel line on the side instead of the top so there’s no where to screw the hammer into.
@@NicrigGood point as the Crankcase ventilation diaphragm (under the disk cover behind the oil filler) can go stiff & increase rocker pressure & cause the gasket to blow again or even worse symptoms! Replacement crankcase diaphragm & cover from Viaco is part V20-3341
Very good video.where is the ignition coil on this engine mate thanks
Changed my leaking valve cover to a new one, and still sometimes smell comes back and smoke from under the hood, the new cover seems normal and dry, could it be old oil on the exhaust burning off?
Have the injectors washers been changed? did it get old
Thanks great video, did mine had to bleed injectors then fired up
How did you get the injectors to come out so easily? Any advice?
I’ve seen people use a slide hammer, but I have the same injectors on my n47 e84 like in this video that have the fuel line on the side instead of the top so there’s no where to screw the hammer into.
Kya isse dalne se lekage nhi hogi kya
Great Video but what torque is needed for rocker cover bolts?
10Nm
Where can I find something showing the tightening order for the N47 4 cylinder?
I have the same question, do whatever knows the tightening sequence?
Did you tell replace injector seals
Hi Great video, what torque was the injector clamp set to? Going to need to do this soon.
ive done mine on 26 Nm all perfect no problems since two years ago
also recomended if the car has over 100k miles to replace the whole rocker cover not only the gasket
@@NicrigGood point as the Crankcase ventilation diaphragm (under the disk cover behind the oil filler) can go stiff & increase rocker pressure & cause the gasket to blow again or even worse symptoms! Replacement crankcase diaphragm & cover from Viaco is part V20-3341
What is the socket size for rockerarm cover?E10 or E12?
You are living in Dune?
Hi, so you only changed the gasket?
Was kostet? Ich will auch meine bmw f11 520d
Jai le même problème la maladie sur ces modèles on dirait 😢
thx a lot sir
how long was it cranked over before it started and did you have to bleed anything
even 2 minutes, don't be scared just wait
Perfect video thank you :)
Top!!
Danke für Video perfekt
Going to try this myself 😮
Na ja nicht schlecht aber da ist novh viel zum machen,ware besser neuer Ventildeckel plus injektor reinigen , Dichtung auch wechseln und und also
Neuer Motor einbauen wäre noch besser
È sbagliato farla partire cosi, si rovina la pompa cp4