Gonna suggest that you DO NOT press on the tab that is designed to release the ignition coil connector. Toyotas are notorious for the tab breaking if the vehicle is anywhere near a decade old or older. GENTLY pry from the opposite end with a pick or small screwdriver to release the tab. It also helps if you spray some lubricant over the connector first.
usually is around 3/4 turn to seat crush washer spark plugs i tried it at 18 ft lbs. and it stopped dead at 3/4 turn once washer was fully squished, so the torque wrench is not really needed.
Hello! I changed my spark plugs, but when I turn on my car, they shake a little than stabilized, I take a little ride and everything okay, but when I turn on next morning they shake a little then stabilized but comes to me a lot of error codes. Misfire in all cylinders, p0300, p03031…. And after the traction light pop up too. Could you help me to understand what is happening? I just changed the all spark plug. I used DENSO Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium.
+@Leuh182 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Gonna suggest that you DO NOT press on the tab that is designed to release the ignition coil connector. Toyotas are notorious for the tab breaking if the vehicle is anywhere near a decade old or older. GENTLY pry from the opposite end with a pick or small screwdriver to release the tab. It also helps if you spray some lubricant over the connector first.
Such an easy and straightforward job!
What's the best way to remove spark plugs that feel like they're seized?
But do you have to replace the ignition coils too when replacing the spark plugs? I noticed you used new ones.
I would mention holding the extension bar centered over plug, so you don't crack plugs by bending to one side.
Just curious - why did you also replace the ignition coils? Is that recommended a long with changing the spark plugs?
Loved watching this video I can’t wait till my mechanic apprenticeship begins so I can do this till I’m that good 😃😃😃😃🤙🤙🤙😊
Easy to understand, will be doing this to my 2014 Camry RZ. Great car
Is it recommended to change out the ignition coils when replacing the spark plugs?
usually is around 3/4 turn to seat crush washer spark plugs i tried it at 18 ft lbs. and it stopped dead at 3/4 turn once washer was fully squished, so the torque wrench is not really needed.
Are denso plugs pre gapped
Thanks, can you list down the tools needed for this
Hello! I changed my spark plugs, but when I turn on my car, they shake a little than stabilized, I take a little ride and everything okay, but when I turn on next morning they shake a little then stabilized but comes to me a lot of error codes. Misfire in all cylinders, p0300, p03031…. And after the traction light pop up too. Could you help me to understand what is happening? I just changed the all spark plug. I used DENSO Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium.
+@Leuh182 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
myToyota dealer is charging $399 for this service, what am i missing?
marhaban ana min matabieik min aleiraq shukran ealaa majhudik fi aleamal waltawdih walakin eindi sual bikhusus shamaeat alqadh lisayaarat kamiri manueiha wakam hu alraqm almatlub walmaktub ealaa shameat alqadh lihadha almakinat washukran lak walimutabieika.