Street Glide Amp Swap

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.พ. 2025
  • Amp swap and setup for folks going for a budget build. I did get back to 20v output, I had the EQ on the HU setup for the first amp and didn't reset it first. All good now and it rocks!! Links to equipment used below. #harleydavidson #streetglide
    DS18 DX4 Deluxe Amp: ds18.com/produ...
    DS18 X4: ds18.com/produ...
    DS18 Harley 8GA Power Wire Kit: ds18.com/produ...
    Amp Clamp: www.amazon.com...
    Oscilloscope: www.amazon.com...

ความคิดเห็น • 15

  • @nohandsdan9353
    @nohandsdan9353 11 หลายเดือนก่อน +1

    Did you ground to the battery or chassis from the amp?

    • @mjdcycles
      @mjdcycles  11 หลายเดือนก่อน +1

      Ground lead goes to battery. You can watch Volunteer Audio install videos (they do tons of Harley audio installs) and they got direct to battery.

    • @nohandsdan9353
      @nohandsdan9353 11 หลายเดือนก่อน +1

      @@mjdcycles thanks bro I will check his video out! I'm getting static but pretty sure it's the AV connections to the, yes 😔, Soundigital 800.4 Evo4.0 amp. They share a common ground but besides that the two infinity fronts sound good. That bike stereo sounded great by the way!

    • @mjdcycles
      @mjdcycles  11 หลายเดือนก่อน +1

      @nohandsdan9353 if you are using RCA cables try twisted version. If you get static on FM radio it can also be LED light interference.

    • @nohandsdan9353
      @nohandsdan9353 11 หลายเดือนก่อน

      @@mjdcycles I'm using the ds18-ry harness so the AV cables are built in but I do have custom dynamics LEDs all over and all plug n play. I'll check that out tonight after work. My bike is a '21 SGS

    • @mjdcycles
      @mjdcycles  11 หลายเดือนก่อน +1

      @@nohandsdan9353 looks like twisted pair AV cables on that harness. If the static comes through on all sources it may be wiring/ground. If it's only when using the radio, it could be LED light interference. All my sources are clean but a few radio stations got wrecked after installing LED lights.

  • @octaneaddictions8198
    @octaneaddictions8198 ปีที่แล้ว +1

    You have to upgrade the ground as well. Both wires should be 8ga, oxygen-free copper (OFC), and not copper-clad aluminum (CCA). Both need to go all the way to the battery.

    • @octaneaddictions8198
      @octaneaddictions8198 ปีที่แล้ว

      Great job using the oscilloscope, but the ground is limiting you. Electricity needs to return to the source. Ground needs to be the same as the power wire.

    • @mjdcycles
      @mjdcycles  ปีที่แล้ว

      The pwr & ground match. They are both the same length, 8ga, and go back to the battery.

    • @EagleFang48
      @EagleFang48 ปีที่แล้ว

      He used 8ga ground did you not watch the video?

  • @ericperry72
    @ericperry72 ปีที่แล้ว +1

    Should have grabbed a Soundigital 800.4 and call it a day.

    • @mjdcycles
      @mjdcycles  ปีที่แล้ว

      Yeah, that looks like a great option too. Hadn't even seen that before.

    • @ericperry72
      @ericperry72 ปีที่แล้ว +1

      @@mjdcycles worth the price and has all the real power you would ever need for upper and lower fairing speakers. And it's smaller.